TKIA-010 U Joint Universal Joint 35x73 35x106 for Hyundai HD 3.5T County Truck Driveline
Key Attributes
Product Summary
Direct-fit TKIA-010 U joint for Hyundai HD 3.5T County, 35x73/35x106mm. Precision needle bearings with sealed caps reduce vibration and extend service life. ISO/TS16949 certified production and 6-month warranty available. Neutral or custom packaging for global export.
Product Details
35x73 35x106 U Joint
,TKIA-010 Universal Joint
,Hyundai HD 3.5T County Cross Joint
The U Joint TKIA-010 (interchangeable with TKIA010) is a direct-fit replacement universal joint for the Hyundai HD 3.5T County truck driveline. This cross-joint transmits torque through the driveshaft while accommodating angle changes — a critical function for rear-wheel-drive commercial vehicles operating under load.
Dimensions: 35×73 mm (Ft) / 35×106 mm (Fn). Manufactured to OEM-equivalent quality standards with reference to ISO/TS16949.
Publicly available data is sourced from supplier listings. The following signals summarize confirmed and outstanding items:
- Confirmed Application: Multiple independent suppliers list TKIA-010 as the U joint for the Hyundai HD 3.5T County.
- Confirmed Dimensions: 35×73 mm (Ft) / 35×106 mm (Fn) — consistent across supplier pages.
- Confirmed Certification Reference: One supplier lists ISO/TS16949.
- Conflict Material: Listings disagree — one cites "high-strength aluminum alloy and precision bearings," another "forged + heat-treated alloy steel," and a third "high-strength cast iron or forged steel." Aluminum alloy is physically implausible for a U joint cross. Verify by physical inspection.
- Pending Installation Success Rate: To be supplied — request repair order statistics.
- Pending Durability Testing: To be supplied — request cycle test or fleet data.
- Clunking or knocking noise from under the vehicle during acceleration or gear changes.
- Vibration through the floor or steering wheel that increases with speed.
- Squeaking or chirping from the driveshaft area during rotation.
- Visible play when twisting the driveshaft by hand with the transmission in neutral.
- Rusted or seized bearing caps, preventing proper lubrication.
| Part Number | TKIA-010 |
| Product Name | Universal Joint / U Joint / Cross Joint |
| Condition | 100% Brand New |
| Size | 35×73 mm (Ft) / 35×106 mm (Fn) |
| Weight | Standard |
| Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Package | Neutral packing or as requested |
| Warranty | 6 months |
| Price & Stock | Please contact us for more information |
| Material | High-strength aluminum alloy & precision bearings (see verification note above) |
| Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement |
| Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit & Verification Signal |
|---|---|
| 35×73 / 35×106 mm dimensions | Direct fit for Hyundai HD 3.5T County driveshaft — confirmed across multiple supplier listings. |
| Precision needle bearings with sealed caps | Reduces vibration and extends service life — supplier claim; request bearing clearance and seal test data. |
| ISO/TS16949 certified production | Controlled manufacturing process — one supplier lists certification; verify certificate number and validity. |
| 6-month warranty | Standard coverage across multiple suppliers. |
| QC Item | Method | Status |
|---|---|---|
| Dimension accuracy (35×73 / 35×106) | Caliper / CMM | To be confirmed by supplier |
| Bearing clearance | Feeler gauge / dial indicator | To be confirmed |
| Material hardness | Rockwell / Brinell | To be confirmed (material conflict must be resolved first) |
| Torque capacity | Bench torsion test | To be confirmed |
| Seal effectiveness | Dust / water ingress test | To be confirmed |
| Dynamic balance | Balancing machine | To be confirmed |
Important: Driveline work is safety-critical. Mark the driveshaft position before removal to preserve balance.
Refer to the Hyundai HD 3.5T County workshop manual for final torque specifications.
- Mark driveshaft-to-yoke alignment before disassembly.
- Remove snap rings or retaining bolts; press out the old U joint using a press or socket — do not hammer.
- Clean yoke bores; inspect for wear, cracks, or out-of-round.
- Install the new U joint with bearing caps seated evenly; install snap rings.
- Lubricate if serviceable type (grease fitting present).
- Torque yoke bolts to the vehicle-specific value from the service manual.
- Road test: Check for vibration at highway speed and clunking during acceleration/deceleration.
- Inspect U joints for play and noise every 20,000 km or at every oil change.
- Grease serviceable joints every 10,000 km if a fitting is present.
- Replace at the first sign of clunking, vibration, or rust bleeding from caps.
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
Cross-reference note: HDA-008 / MC828264 are aftermarket cross-reference numbers that primarily appear in Mitsubishi Fuso brake booster catalogs. This product is primarily oriented toward ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. Both "short" and "long" pushrod variants exist within the MC828264 family.
Always provide the VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
RELATED PRODUCTS
Water Temperature Sensor 1026340FE010 for JAC N56 Sunray Sollers Atlant — Verified OEM NTC
Verified OEM NTC coolant sensor (1026340FE010) for JAC N56/Sunray/Sollers Atlant. Brass housing, copper alloy pins, -40°C to 130°C range, ISO/TS16949 certified, 99.3% plug-and-play fitment. Direct replacement ensuring accurate ECU signals and stable engine operation.
Differential Pressure Sensor 1026160FE010 for JAC N56 Sunray Sollers Atlant DPF — Verified OEM
Verified OEM DPF differential pressure sensor 1026160FE010 for JAC N56/Sunray/Sollers Atlant. Piezoresistive element, ±10–100 kPa range, 125°C thermal resistance, ISO/TS16949 certified. Plug-and-play fitment with 99.3% installation success. Brand new, 100% inspected.
Intake Air Pressure & Temperature Sensor 1026130FE010 for JAC N56 Sunray T8 HFC4DE1 — Verified OEM MAP/IAT
Verified OEM MAP/IAT sensor 1026130FE010 for JAC N56/T8 HFC4DE1 engines. Combined pressure/temperature sensing ensures precise fuel control and efficiency. Durable housing, exact-fit connector, 99.3% installation success. 6-month warranty, custom packing available.
Camshaft Position Sensor 1026120FE010 for JAC N56 Sunray SOLLERS Atlant 2.7D 4DE1-1D — Verified OEM
Verified OEM camshaft position sensor 1026120FE010 for JAC N56, Sunray, SOLLERS Atlant 2.7D 4DE1-1D Euro 5. Durable metal housing, precision signal output, 99.3% fitment success. 100% inspected, 6-month warranty, neutral or custom packing for global B2B export.
