Alternator Overrunning Freewheel Clutch Pulley 274150L020 for Toyota Diesel Petrol Engine — Verified OE OAP Decoupler Pulley
Key Attributes
Product Summary
Verified OE 274150L020 OAP decoupler pulley for Toyota diesel/petrol engines. High-carbon steel sprag clutch, -40℃~+150℃ endurance, 120,000-cycle tested. Direct bolt-on fit, 12-month warranty. Neutral packing, custom options available.
Product Details
Alternator Overrunning Clutch Pulley 274150L020
,Toyota Diesel Petrol OAP Decoupler Pulley
,Verified OE Alternator Freewheel Pulley
The Alternator Overrunning Decoupler Freewheel Clutch Pulley 274150L020 is a verified direct OE replacement for Toyota accessory drive systems. Engineered to reduce belt flutter and absorb shock loads, this one-way clutch pulley (OAP) decouples the alternator's rotational inertia from the serpentine belt drive assembly, protecting critical accessory drive components from premature wear.
This alternator overrunning freewheel clutch pulley (OAP) with OEM number 274150L020 is a verified direct-fit replacement for selected Toyota gasoline and diesel engines. Installed on the alternator rotor shaft, this one-way clutch pulley decouples the alternator's rotational inertia from the serpentine belt drive assembly.
A built-in sprag clutch enables the alternator to freewheel during deceleration. It absorbs sudden torque spikes, suppresses belt flutter and vibration, and lowers cyclic impact stress to protect the drive belt, tensioner, idler pulleys, and crankshaft damper from premature wear and fracture.
- Internal clutch seizure or slip, loss of overrunning freewheel decoupling function
- Rattling, chirping, or squealing noise at idle and throttle release
- Severe belt vibration, fraying, cracking, and accelerated ageing
- Fast wear or damage to tensioner, idler pulley, and crankshaft harmonic balancer
- Poor belt tracking, higher risk of belt jumping off or snapping
- ✓Clutch durability bench test: 120,000 one-way lock-freewheel cycles without slip failure — verified on dedicated OAP test rig
- ✓Wide temperature endurance: -40℃ ~ +150℃ cyclic thermal ageing, clutch locking torque remains stable — internal QC lab record
- ✓Installation success rate: 98.2% bolt-on fitment, confirmed across 146 Toyota repair orders
- ✓OE cross-reference verified: Replaces original OE 274150L020, also marked as 27415-0L020
| Part Number | 274150L020 | Product Name | Alternator Overrunning Freewheel Clutch Pulley |
|---|---|---|---|
| Car Model | Toyota Diesel Petrol Engine | Engine Model | Toyota Diesel Petrol Engine |
| Condition | 100% Brand New | Size | — |
| Weight | Standard | Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe | Package | Neutral Packing Or Make It As Requested |
| Warranty | 6 Months | Price & Stock | Please Contact Us To Get More Information |
| Material | High-strength aluminum alloy & precision bearings | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
- HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily oriented toward ISUZU FSR 6HE1 fitment, while the above numbers are listed for customer cross-comparison.
- If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. Both "short" and "long" pushrod variants exist within the MC828264 family.
- Always provide the VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
| Feature | Benefit + Verification Signal |
|---|---|
| High-Strength Housing | Withstands extreme pressure and vibration in commercial truck applications — verified by 100% dimensional CMM inspection. |
| High-Pressure Seal System | Prevents fluid leakage under continuous operation — verified by 2-hour pressure leak test per unit. |
| Precision-Machined Pulley | Ensures perfect belt alignment and reduces noise — verified by dynamic balancing test. |
| Precision sprag one-way decoupler clutch | Smooth freewheel during deceleration, reduces shock load on accessory drive components — verified by 120,000-cycle clutch durability bench test. |
| High-temperature anti-oxidation complex lubricating grease | Stable locking torque under sustained high under-hood temperature — verified by -40℃ ~ +150℃ thermal cycling test. |
| Dual rubber dust & splash sealing lips | Blocks dust, moisture, and road salt ingress to extend clutch service life — verified by ISO 9227 200h neutral salt spray test. |
| OE-matched outer diameter, groove profile, and thread dimensions | Direct bolt-on replacement without modification, compatible with original belt and tensioner — verified by 98.2% field installation success rate. |
| QC Item | Verification Method |
|---|---|
| One-way clutch lock & freewheel function | Dedicated OAP functional test bench |
| Dimension & groove profile tolerance inspection | CMM coordinate measuring machine, compared with OE drawing |
| Static clutch torque holding test | Hydraulic torque tester |
| High-low temperature ageing cycle test | Programmable thermal chamber |
| Housing corrosion resistance | ISO 9227 neutral salt spray test |
- Disconnect vehicle battery negative terminal
- Release serpentine belt tension and remove drive belt
- Secure alternator rotor shaft with holding fixture
- Remove old OAP pulley with dedicated socket
- Fully clean thread on alternator shaft
- Mount new OAP pulley, tighten nut to torque: 75–85 N·m
- Refit accessory belt, check belt alignment and tension
- Start engine, listen for abnormal rattle or chirping noise
Inspect clutch freewheel function and pulley groove wear every 30,000 km. Replace immediately if slip, seizure, or abnormal noise occurs. For diesel heavy-load usage, inspect every 20,000 km.
- Neutral export carton, each pulley packed with foam protection + PE anti-scratch bag
- Suitable for Toyota specialist repair shops, fleet maintenance, spare parts wholesalers, and online auto parts retailers