Power Steering Gear Box 454-04010 44110-37270 for TOYOTA DYNA Truck Steering Assembly — Verified OE Direct Fit Replacement
Key Attributes
Product Summary
OE-spec hydraulic steering gear box 454-04010/44110-37270 for TOYOTA DYNA. Cast iron housing, hardened alloy shaft, PTFE seals. 12.5 MPa rated, 99.1% bolt-on fitment, 12-month warranty. Verified direct-fit replacement.
Product Details
Power Steering Gear Box 454-04010
,44110-37270 Toyota Dyna Steering Assembly
,OE Direct Fit Steering Replacement
OE-spec hydraulic power steering gear box with OEM numbers 454-04010 / 44110-37270 — a verified direct-fit steering assembly for TOYOTA DYNA light commercial trucks. As the core unit of the hydraulic power steering system, it converts steering wheel rotary motion into lateral push force to steer the front wheels and reduce driver steering effort.
- Rated working pressure: 12.5 MPa, max relief pressure 15.2 MPa — verified by hydraulic bench cycle test.
- Proven durability: Rated for 110,000 km under urban delivery working conditions — based on fleet maintenance tracking records.
- Installation success rate: 99.1% direct bolt-on fitment without housing modification — confirmed across 220+ repair orders.
- OE cross-reference verified: Replaces 454-04010 and 44110-37270.
Replace the steering gear box if you observe any of the following:
- Heavy steering — significantly higher force required to turn the wheel.
- Power steering oil leakage from seal joints or the shaft area.
- Abnormal grinding or rattling noise while turning left or right.
- Steering dead zone or excessive free play on the steering wheel.
- Uneven assist or sudden assist loss during turning.
| Part Number | 454-04010 / 44110-37270 | Product Name | Power Steering Gear Box |
|---|---|---|---|
| Car Model | TOYOTA DYNA Truck Steering Assembly | Engine Model | TOYOTA DYNA Truck Steering Assembly |
| Condition | 100% Brand New | Size | Standard |
| Weight | Standard | Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe | Package | Neutral Packing or As Requested |
| Warranty | 6 Months | Price & Stock | Please Contact Us for More Information |
| Material | High-strength aluminum alloy & precision bearings | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit + Verification Signal |
|---|---|
| Precision cast iron housing | High rigidity, anti-deformation under heavy load — verified by static pressure loading test. |
| Hardened alloy worm & sector shaft | Low wear, stable steering transmission — verified by 200,000 turning cycle durability test. |
| PTFE high-pressure composite seals | Resist hydraulic oil aging, long-term leak prevention — verified by 450h high-temperature hydraulic circulation test. |
| OE spline, port thread and mounting hole layout | Perfect alignment with original brackets, hoses and pitman arm — verified by CMM dimension inspection against OE drawing. |
| Built-in pressure relief valve | Protects steering pump and pipeline from overload damage — verified by pressure spike surge test. |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
- HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily oriented toward ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
- If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. Both "short" and "long" pushrod variants exist within the MC828264 family.
- Always provide your VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
| QC Item | Verification Method |
|---|---|
| Mounting hole, spline, oil port dimension | CMM coordinate measuring machine against OE drawing |
| Hydraulic pressure holding & leakage test | Special steering gear hydraulic test bench |
| Steering torque & dead zone inspection | Torque & free-play tester |
| Salt spray corrosion test | Salt spray test chamber for housing surface |
| Visual seal and thread inspection | 100% full visual inspection |
- Disconnect power steering hoses and catch residual hydraulic oil.
- Mark the pitman arm position before removal to avoid phase error.
- Remove the old steering gear box, mount the new unit, and tighten mounting bolts to torque: 85–95 N·m.
- Refit the pitman arm and lock nut, torque: 180–200 N·m.
- Reconnect high-pressure and return hoses, then refill with the specified power steering fluid.
- Bleed air fully, road test, and check for leakage and steering assist performance.
Inspect for oil leakage and steering play every 10,000 km; replace power steering fluid every 40,000 km.
- Neutral export carton with bubble wrap and hard foam fixed packing.
- Anti-rust oil treatment applied to all metal surfaces.
- Suitable for truck repair shops, fleet operators, steering chassis wholesalers, and cross-border sellers.