Center Support Bearing 37230-36080 for Toyota Coaster BB21 Dyna — Verified 30mm OEM
Key Attributes
Product Summary
Verified 30mm OEM center support bearing 37230-36080 for Toyota Coaster BB21 & Dyna. Steel+rubber build absorbs vibration, reduces driveline noise, and restores factory alignment. Direct-fit replacement for 37230-36060/36061, GOM-2337, MEM-82337, CB67. ISO9001:2015 supplier, 1-year warranty, 100% inspected. Neutral or custom packaging for wholesale export.
Product Details
Center Support Bearing 37230-36080
,Toyota Coaster BB21 center bearing
,30mm OEM Toyota Dyna bearing
The Driveshaft Center Support Bearing 37230-36080 is a verified direct-fit replacement for Toyota Coaster (RB2#, BB2#, BB21, HB3#, HZB3#) and Dyna applications. Featuring a 30 mm bore, it replaces OEM numbers 37230-36060 and 37230-36061. This bearing is a critical component of the driveshaft support system, responsible for supporting the propeller shaft at its center point, reducing driveline vibration during high-speed rotation, and protecting universal joints from premature wear.
- Bearing Bore: 30.00 mm inner diameter — verified by multiple supplier datasheets.
- Mounting Dimension: Bolt hole centre width 125 mm — supplier technical data.
- Reference Dimensions: 165 mm (L) × 73 mm (W) × 138 mm (H).
- Cross-Reference: Replaces 37230-36060, 37230-36061, GOM-2337, MEM-82337, CB67.
- Installation Success Rate: [To be supplied by YIMI].
Replace the center support bearing if you observe any of the following:
- Driveshaft vibration at highway speeds
- Clunking or knocking noise during acceleration or deceleration
- Visible play or wobble in the center bearing
- Rubber mounting cushion cracking or separation
- Premature universal joint wear
| Part Number | 37230-36080 | Product Name | Center Support Bearing |
|---|---|---|---|
| Car Model | Toyota Coaster BB21 Dyna | Engine Model | Toyota Coaster BB21 Dyna |
| Condition | 100% Brand New | Size | 30 mm bore |
| Weight | Standard | Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe | Package | Neutral Packing or Made as Requested |
| Warranty | 6 Months | Price & Stock | Please Contact Us for More Information |
| Material | High-strength aluminum alloy & precision bearings | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit & Verification Signal |
|---|---|
| 30 mm bearing bore | Matches OE propeller shaft journal diameter for precise fit — verified against supplier datasheet. |
| Rubber cushion mounting | Absorbs driveline vibration and reduces cabin noise — design confirmed by supplier technical data. |
| Direct OE replacement | Restores factory driveshaft alignment without modification — based on OE 37230-36080 application data. |
| Replaces multiple OEM numbers | Simplifies inventory management for Coaster/Dyna coverage — cross-reference confirmed by supplier listings. |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
- HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily intended for ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
- If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. "Short" and "long" pushrod variants exist within the MC828264 family.
- Always provide your VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
| QC Item | Verification Method |
|---|---|
| Bearing bore diameter | Bore gauge inspection against 30.00 mm specification |
| Rubber hardness | Shore A durometer sampling |
| Rubber-to-metal bond | Visual and peel inspection |
| Rotational smoothness | Manual spin test for bearing noise/vibration |
- Mark driveshaft-to-flange alignment before removal.
- Support the driveshaft and remove the center bearing mounting bolts.
- Inspect universal joints and driveshaft for wear; replace if necessary.
- Install the new center bearing 37230-36080, aligning marks made during removal.
- Torque mounting bolts to Toyota workshop manual specification [torque value to be supplied].
Inspect every 80,000–120,000 km, or immediately if driveshaft vibration or noise is observed.
- Standard export packaging: neutral carton or branded packaging available.
- Suitable for: wholesale distributors, driveshaft repair specialists, and fleet maintenance suppliers.