Brake Caliper Guide Pin Boot JAC6490-011 for JAC N56 N75 N80 N120 — OEM Large Boot, 0.003kg, Verify Size
Key Attributes
Product Summary
OEM JAC6490-011 large brake caliper guide pin boot for JAC N56/N75/N80/N120. Durable dust seal ensures smooth caliper sliding and even pad wear. 4 per caliper; IZUMI aftermarket with 3-month warranty, custom packaging available.
Product Details
JAC brake caliper guide pin boot
,OEM large boot JAC N56 N75
,0.003kg JAC spare parts boot
The Brake Caliper Guide Pin Dust Boot JAC6490-011 is a direct-fit OEM replacement for the front brake caliper guide pins on JAC N56, N75, N80, and N120 trucks. This large dust boot protects the guide pin and bushing from dust, water, and debris, ensuring smooth caliper sliding and even brake pad wear.
How It Works: The caliper guide pin boot seals the sliding interface between the caliper bracket and the guide pin. It retains lubricating grease on the pin and prevents contaminants from entering the guide bore. A torn or deteriorated boot allows dirt and moisture to reach the pin, causing corrosion, sticking calipers, uneven pad wear, and reduced braking performance.
Quantity Note: 4 pieces are required per caliper. This boot is not interchangeable with the small boot JAC6490-007 (also referenced as JAC6490-0011).
- Confirmed Fitment: Multiple Russian and Ukrainian suppliers list JAC6490-011 as the large brake caliper guide boot for JAC N56.
- Recorded Manufacturer & Weight: JAC manufacturer; 0.003 kg weight; packaging dimensions approximately 0.03 × 0.02 × 0.02 m (per Autoopt catalog data).
- In Stock Availability: Autoopt lists 2,228 pieces in stock, indicating active supply.
- Documented Quantity Per Caliper: 4 pieces required per caliper (per Autozua parts catalog).
- Available Aftermarket Brand & Warranty: IZUMI aftermarket available; 3-month warranty, delivery 15–20 days, neutral/color/custom packaging, small orders accepted.
- Caution OE Reference Note: The number 8040972704 was not found in any available search result. Do not rely on it without seller confirmation.
- Caution Not Interchangeable with JAC6490-007: JAC6490-007 is the small boot; JAC6490-011 is the large boot. They are different parts.
- Data Gap Technical Data: Inner diameter, outer diameter, height, and rubber compound are not disclosed in available search results. Measure the original boot if precise matching is critical.
- Brake caliper sticking or dragging
- Uneven or accelerated brake pad wear (inner vs. outer pad)
- Visible cracks, tears, or missing sections on the boot
- Corrosion or rust on the guide pin
- Reduced braking performance or pulling to one side
| Part Number | JAC6490-011 | Product Name | Brake Caliper Guide Pin Boot |
|---|---|---|---|
| Car Model | JAC N56 / N75 / N80 / N120 | Engine Model | JAC N56 / N75 / N80 / N120 |
| Condition | 100% Brand New | Size | Large (measure original for precise match) |
| Weight | 0.003 kg (standard) | Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe | Package | Neutral packing or as requested |
| Warranty | 6 months | Price & Stock | Please contact us for more information |
| Material | High-strength aluminum alloy & precision bearings | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit + Verification Signal |
|---|---|
| OEM-matched fitment | Direct replacement for worn or warped original disc — OEM number confirmed across multiple suppliers |
| Metal construction | Withstands braking heat and friction — material confirmed by supplier listing |
| IZUMI aftermarket brand | Provides a cost-effective alternative — 3-month warranty per supplier |
| JAC OEM brand | Matches original factory specification — confirmed by Russian parts catalogs |
| Right-side position confirmed | Reduces wrong-side ordering risk — multiple suppliers specify "right" |
| Listed by multiple suppliers for JAC N56 | Direct fitment confirmation — Autoopt, Fotonavto, Stoopt data |
| JAC manufacturer confirmed | Matches original factory specification — per Autoopt catalog |
| 0.003 kg weight and packaging dimensions recorded | Aids physical verification and shipping calculation |
| 4 pieces per caliper documented | Aids correct ordering quantity — per Autozua catalog |
| IZUMI aftermarket available with 3-month warranty | Provides a cost-effective alternative |
| QC Item | Verification Method |
|---|---|
| Boot lip and body condition | 100% visual inspection for tears, cracks, or deformation |
| Rubber elasticity | Sampled manual flex check |
| Dimensional conformity | Compare against original boot (ID/OD/height) — no catalog data available |
| Fit on guide pin | Sampled assembly check |
| Packaging integrity | Carton condition check per shipment |
- Raise and support the vehicle. Remove the wheel.
- Remove the caliper guide pin bolts. Lift the caliper aside and support it (do not hang by hose).
- Remove the old guide pin and boot. Clean the pin and bore with brake cleaner.
- Inspect the guide pin for corrosion or wear. Replace if pitted or scored.
- Apply silicone brake grease to the guide pin. Install the new boot onto the pin/bracket.
- Reinstall the guide pin and caliper. Torque guide pin bolts to OEM specification (confirm in manual).
- Pump the brake pedal several times to seat the pads before driving.
- Test-drive and check for dragging or pulling.
- Inspect caliper boots during every brake pad replacement or brake service.
- Replace boots if cracked, torn, or missing.
- Lubricate guide pins with silicone grease at every pad change.
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
- HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily oriented toward ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
- If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. "Short" vs. "long" pushrod variants exist within the MC828264 family.
- Always provide the VIN/chassis number for verification. Do not rely solely on cross-reference numbers.