Brake Caliper Guide Pin Boot JAC6490-007 for JAC N56 N75 N80 N120 — OEM Small Boot, 0.002kg, Verify Size
Key Attributes
Product Summary
OEM JAC6490-007 small guide pin boot for JAC N56/N75/N80/N120 trucks. Direct-fit rubber seal protects pins from dust and moisture, preventing caliper sticking and uneven pad wear. Four required per caliper; 0.002kg. Verify dimensions before ordering.
Product Details
Brake Caliper Guide Pin Boot JAC6490-007
,OEM Small Boot for JAC N56 N75
,0.002kg Brake Caliper Boot JAC N80 N120
The Brake Caliper Guide Pin Boot with part number JAC6490-007 is a direct-fit replacement for the front brake caliper guide pins on JAC N56, N75, N80, and N120 trucks. This small dust boot protects the guide pin and bushing from dust, water, and debris, ensuring smooth caliper sliding and even brake pad wear.
The boot seals the sliding interface between the caliper bracket and the guide pin. It retains lubricating grease on the pin and prevents contaminants from entering the guide bore. A torn or deteriorated boot allows dirt and moisture to reach the pin, causing corrosion, sticking calipers, uneven pad wear, and reduced braking performance.
- ConfirmedFitment confirmed by JAC official dealer — JAC Vladivostok official dealer lists JAC6490-007 for N56, N75, N80, N120.
- ConfirmedManufacturer & weight recorded — JAC manufacturer; 0.002 kg weight, per Autoopt (АвтоАльянс) catalog data.
- ConfirmedQuantity per caliper — 4 pieces required per caliper, per Autozua (Ukraine) parts catalog.
- ConfirmedCustoms code — HS code 4016995709 (vulcanized rubber articles), per Autoopt data.
- ConfirmedMarket availability — Listed across multiple Russian and Ukrainian suppliers with stock available.
- Brake caliper sticking or dragging
- Uneven or accelerated brake pad wear (inner vs. outer pad)
- Visible cracks, tears, or missing sections on the boot
- Corrosion or rust on the guide pin
- Reduced braking performance or pulling to one side
| Part Number | JAC6490-007 |
|---|---|
| Product Name | Brake Caliper Guide Pin Boot |
| Car Model | JAC N56 / N75 / N80 / N120 |
| Engine Model | JAC N56 / N75 / N80 / N120 |
| Condition | 100% Brand New |
| Weight | Standard (0.002 kg per catalog data) |
| Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Package | Neutral packing or as requested |
| Warranty | 6 months |
| Price & Stock | Please contact us for more information |
| Material | High-strength aluminum alloy & precision bearings |
| Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement |
| Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit + Verification Signal |
|---|---|
| OEM-matched fitment | Direct replacement for worn or warped original disc — OEM number confirmed across multiple suppliers. |
| Metal construction | Withstands braking heat and friction — material confirmed by supplier listing. |
| IZUMI aftermarket brand | Provides a cost-effective alternative — 3-month warranty per supplier. |
| JAC OEM brand | Matches original factory specification — confirmed by Russian parts catalogs. |
| Right-side position confirmed | Reduces wrong-side ordering risk — multiple suppliers specify "right". |
| Listed by JAC official dealer for N56/N75/N80/N120 | Direct fitment confirmation — JAC Vladivostok dealer data. |
| JAC manufacturer confirmed | Matches original factory specification — per Autoopt catalog. |
| 0.002 kg weight recorded | Consistent with a small rubber boot — per catalog data. |
| 4 pieces per caliper documented | Aids correct ordering quantity — per Autozua catalog. |
| QC Item | Verification Method |
|---|---|
| Boot lip and body condition | 100% visual inspection for tears, cracks, or deformation |
| Rubber elasticity | Sampled manual flex check |
| Dimensional conformity | Compare against original boot (ID/OD/height) — no catalog data available |
| Fit on guide pin | Sampled assembly check |
| Packaging integrity | Carton condition check per shipment |
- Raise and support the vehicle. Remove the wheel.
- Remove the caliper guide pin bolts. Lift the caliper aside and support it (do not hang by hose).
- Remove the old guide pin and boot. Clean the pin and bore with brake cleaner.
- Inspect the guide pin for corrosion or wear. Replace if pitted or scored.
- Apply silicone brake grease to the guide pin. Install the new boot onto the pin/bracket.
- Reinstall the guide pin and caliper. Torque guide pin bolts to OEM specification (confirm in manual — typically 25–35 N·m for caliper guide pins, but verify).
- Pump the brake pedal several times to seat the pads before driving.
- Test-drive and check for dragging or pulling.
- Inspect caliper boots during every brake pad replacement or brake service.
- Replace boots if cracked, torn, or missing.
- Lubricate guide pins with silicone grease at every pad change.
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
- HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily oriented toward ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
- If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. "Short" and "long" pushrod variants exist within the MC828264 family.
- Always provide the VIN/chassis number for verification. Do not rely solely on cross-reference numbers.