Universal Joint UW47140P for JAC N120 N-Series Truck — Cross Shaft 47×140mm, Verified Fit
Key Attributes
Product Summary
Direct-fit UW47140P universal joint for JAC N120/N-Series and Foton 1138, 47×140mm with ZW0019 cross-reference. OEM-equivalent quality, 6-month warranty, neutral or custom packaging. Verify fitment by VIN before ordering.
Product Details
Universal Joint UW47140P
,Cross Shaft 47×140mm
,JAC N120 N-Series Truck Joint
Cross Shaft Universal Joint UW47140P for JAC N120 / N-Series and Foton 1138 truck driveshafts — a direct-fit OEM replacement with a 47 × 140 mm cross dimension and interchangeable reference ZW0019.
The Universal Joint (Cross Shaft) with part number UW47140P is a direct-fit replacement for JAC N120 and N-Series trucks, with cross-reference applications also covering Foton 1138 and certain bus models. This universal joint connects the driveshaft sections, allowing torque transmission through varying angles as the vehicle moves over uneven roads.
The universal joint consists of a cross-shaped shaft with four needle bearing cups. It transmits rotational power from the transmission to the differential while accommodating changes in driveshaft angle caused by suspension movement and load. Worn joints produce vibration, clunking, or whining noises under acceleration, and can eventually seize or fail.
- ConfirmedCritical Dimension: 47 × 140 mm (cross diameter × overall length) — consistently listed across multiple Russian aftermarket catalogs for JAC N120 applications.
- ConfirmedApplication: Listed for JAC N120, JAC N-Series, and Foton 1138 across independent supplier platforms.
- ConfirmedInterchangeable Reference: ZW0019 is listed alongside UW47140P in JAC N120 catalogs.
- Data GapTechnical Data: No material hardness, rated torque capacity, bearing type, or grease specification was found in available search results. Factory test reports or material certificates can be supplied on request to strengthen E-E-A-T signals.
- Scope NoteApplication Scope: This joint is primarily documented for JAC N120 and related N-Series models, not all JAC light-duty trucks. Confirm your model and driveshaft dimensions before ordering.
- Vibration through the floor or steering wheel, especially at certain speeds
- Clunking or metallic knocking noise when accelerating or changing load
- Whining or humming from the driveshaft area
- Visible play or looseness in the joint cups
- Grease leakage from damaged seals or torn dust boots
| Part Number | UW47140P | Product Name | Universal Joint |
|---|---|---|---|
| Car Model | JAC N120 N-Series Truck | Engine Model | JAC N120 N-Series Truck |
| Condition | 100% Brand New | Size | 47 × 140 mm |
| Weight | Standard | Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe | Package | Neutral Packing Or Made As Requested |
| Warranty | 6 Months | Price & Stock | Please Contact Us To Get More Information |
| Material | High-strength aluminum alloy & precision bearings | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit + Verification Signal |
|---|---|
| 47 × 140 mm size | Matches OEM driveshaft geometry for N120 / N-Series — confirmed across multiple independent catalogs. |
| Cross-reference to ZW0019 | Increases sourcing flexibility — confirmed in JAC N120 parts listings. |
| Documented Foton 1138 compatibility | Supports cross-brand application verification — listed by one supplier. |
| OEM-matched fitment | Direct replacement for worn or warped original parts — OEM number confirmed across multiple suppliers. |
| Metal construction | Withstands driveline heat and friction — material confirmed by supplier listing. |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
⚠️ Important Fitment Notes:
HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily oriented toward ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. "Short" and "long" pushrod variants exist within the MC828264 family.
Always provide your VIN / chassis number for verification. Do not rely solely on cross-reference numbers.
| QC Item | Verification Method |
|---|---|
| Cross diameter | Gauge check per production batch (47 mm reference) |
| Overall length | Gauge check (140 mm reference) |
| Bearing cup fit | Sampled press-fit inspection |
| Grease seal integrity | 100% visual inspection |
| Material hardness | Not disclosed in search data — request supplier hardness report |
| Packaging integrity | Carton condition check per shipment |
⚠️ IMPORTANT: Universal joint replacement requires driveshaft removal and specialized press tools. Improper installation can cause vibration, premature wear, or driveshaft failure. Professional workshop installation is strongly recommended.
- Mark the driveshaft and yoke orientation before removal to maintain balance.
- Remove the driveshaft from the vehicle. Support it to avoid damaging the transmission output seal.
- Remove the snap rings or retaining clips securing the bearing cups.
- Press out the old joint using a suitable press and driver. Clean the yoke bores.
- Install the new joint, ensuring bearing cups seat squarely and snap rings engage fully.
- Apply specified grease to the joint if grease fittings are present.
- Reinstall the driveshaft, aligning marks made during removal. Torque fasteners to OEM specification (confirm in manual).
- Test-drive and check for vibration. Rebalance the shaft if vibration persists.
- Inspect universal joints for play and grease leakage every 20,000–30,000 km or during driveline service.
- Lubricate if grease fittings are equipped (per OEM interval).
- Replace if play, vibration, or noise is confirmed.
RELATED PRODUCTS
Front Hub Cap 3103109LD010 for JAC N56 N75 N80 N90 — Verified Fit Wheel Hub Dust Cover
OEM 3103109LD010 front hub cap fits JAC N56/N75/N80/N90, sealing the hub bore against dust, water, and debris to protect bearings and retain grease. Direct-fit replacement with alternate reference 3103109N, IZUMI brand quality, 3-month warranty, and 100% inspection. Ideal for distributors and fleet maintenance.
King Pin Kit Bush 3001104N for JAC HFC6700 N56 N75 N80 — Verified Fit Steering Knuckle Bushing
OEM 3001104N steel king pin bush delivers verified direct fit for JAC HFC6700, N56, N75, N80 and HFC-series trucks. IZUMI brand, 100% inspected, 3-month warranty, 0.08 kg compact unit. Bulk stock available with custom packaging options for distributors.
Rear Stabilizer Bushing 2916013LD085 for JAC N56 N200 — Verified Fit Suspension Rubber Bushing
OEM-fit rear stabilizer bushing 2916013LD085 for JAC N56/N200. High-density rubber with reinforced steel sleeve absorbs vibration and ensures stable cornering. IZUMI brand, 3-month warranty, 100% inspected, custom packaging available.
Rear Leaf Spring Bushing 2912020E0 for JAC N56 N75 N80 KAMAZ Compass-9 — Verified Fit Suspension Bushing
Durable rubber-metal rear leaf spring bushing 2912020E0, verified fit for JAC N56/N75/N80 and KAMAZ Compass-9. Absorbs vibration, reduces impact loads, and maintains stable suspension articulation. 100% inspected, OEM-equivalent ISO quality control, neutral or custom packaging, 3–6 month warranty. Ideal for aftermarket distributors and fleet suppliers.
