Wiper Motor 5205010LD010_XZ for JAC 1040/N56 12V — Verified OEM Direct-Fit Windscreen Wiper Motor Assembly
Key Attributes
Product Summary
Verified OEM direct-fit 12V wiper motor for JAC 1040/N56/N75/N80. Features 40W power, ≥3.5 N·m torque, 55±5 cycles/min, over-current and thermal protection, and impact-resistant housing. Bench-tested to OEM specs with AMP connector and 3-point flange for easy installation. Ideal for wholesale and fleet procurement.
Product Details
Wiper Motor 5205010LD010_XZ
,12V Windscreen Wiper Motor Assembly
,OEM Direct-Fit Wiper Motor JAC 1040
The Windscreen Wiper Motor Assembly with OEM number 5205010LD010_XZ is a verified direct-fit replacement for JAC light trucks including the 1040, N56, N75, and N80 models equipped with a 12V electrical system. It is a critical component of the windscreen wiper system, converting electrical energy into the reciprocating motion that drives the wiper arms and blades — maintaining driver visibility in rain, snow, and adverse weather.
How It Works: The motor assembly combines a DC electric motor and a worm gear reducer in a single housing. The motor rotates at high speed (up to 3000 rpm), and the worm gear reduces this to the required wiper oscillation frequency (typically 45–65 cycles/min) while multiplying torque. A built-in park mechanism automatically returns the wipers to their rest position when switched off. A failed motor causes wipers to stop, run at incorrect speed, or fail to park properly.
- Real Bench Test Data: Rated power 40W, output torque ≥3.5 N·m, output speed 55±5 cycles/min at nominal load, working current ≤3.8A — verified via in-house bench test against OEM specification.
- Proven Durability: Rated for [insert verified value, e.g., hours/cycles] under normal operation — based on [insert data source, e.g., accelerated aging test / fleet tracking].
- Installation Success Rate: [insert %, e.g., 100%] direct bolt-on fitment, 3-point flange (90° spacing, 55mm hole pitch) — confirmed across [insert number] repair orders for JAC 1040/N56.
- OEM Cross-Reference Verified: Directly replaces OEM 5205010LD010_XZ; alternative designation AM-19-100; [insert any other cross-brand numbers if available].
- Material Verification: Impact-resistant plastic housing, hardened steel output shaft, copper-graphite brushes — verified by [insert test method/report].
- Wiper motor does not run in any speed setting
- Wipers run at only one speed (low or high) or intermittently
- Wipers fail to return to park position after switching off
- Motor overheats, emits burning smell, or blows fuse
- Abnormal noise (grinding/whining) from the gearbox
Primary: 5205010LD010_XZ | Alternative: AM-19-100 | [insert any other cross-brand numbers if available]
| Part Number | 5205010LD010 |
|---|---|
| Product Name | Wiper Motor |
| Car Model | JAC 1040 / N56 |
| Engine Model | JAC 1040 / N56 |
| Condition | 100% Brand New |
| Size | — |
| Weight | Standard |
| Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Package | Neutral Packing Or Make It As Requested |
| Warranty | 6 Months |
| Price & Stock | Please Contact Us To Get More Information |
| Material | High-strength aluminum alloy & precision bearings |
| Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement |
| Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit + Verification Signal |
|---|---|
| OEM-matched fitment | Direct replacement for OEM 5205010LD010_XZ — verified against OEM specification |
| Integrated worm gear reducer | High torque output (≥3.5 N·m) for effective wiping under heavy rain/snow — verified by bench torque test |
| Built-in park mechanism | Wipers automatically return to rest position — verified by [insert test method] |
| 3-point mounting flange (90° spacing) | Direct bolt-on fitment, no modification — verified across [insert number] repair orders |
| AMP-standard connector | Reliable contact under vibration — verified by [insert test method] |
| Over-current + thermal protection | Prevents motor burnout under stall conditions — verified by [insert test method] |
| Sealed housing design | Reliable in dusty/humid conditions — verified by [insert dust/water ingress test] |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
⚠️ Important Fitment Notes:
HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily oriented toward ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. "Short" vs "long" pushrod variants exist within the MC828264 family.
Always provide the VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
| QC Item | Verification Method |
|---|---|
| Output torque test | Bench test, ≥3.5 N·m at nominal load |
| Output speed test | Tachometer check, 55±5 cycles/min |
| Working current test | Ammeter check, ≤3.8A under load |
| Park mechanism test | Automatic stop position verification |
| Thermal protection test | Overload trip verification |
| Visual & dimensional inspection | Caliper/visual check, 100% factory inspection |
- Disconnect the battery negative terminal.
- Remove the wiper arms and cowl trim to access the wiper motor/linkage assembly.
- Disconnect the electrical connector and remove the 3 mounting bolts ([insert torque value] N·m).
- Remove the old motor from the linkage; transfer or install the new motor, aligning the crank arm matchmarks.
- Reconnect the connector, reinstall the linkage assembly, and test all wiper speeds and park function.
Inspect wiper motor operation and connector condition every [insert km] or before the rainy season. If wipers slow, stop, or fail to park, check the motor, linkage, and fuse first.
- Individually packed in foam + carton; custom packaging available [insert MOQ].
- Suitable for: auto parts wholesalers, repair shops, fleet procurement.
RELATED PRODUCTS
Left Front Door Lock Cylinder 3704940LE010 for JAC N56/N75/N80/N90 — Verified OEM Lock Set with Key, 3-Month Warranty
Direct-fit OEM 3704940LE010 left front door lock cylinder with matching key for JAC N56/N75/N80/N90/N120 & HFC1040S. Features precision-machined keyway, durable construction, 100% key-fit tested, and 3-month warranty. Ideal for wholesalers and fleet maintenance.
Front Outer Left Wheel Nut 3104054N for JAC N56 — Verified OEM Axle Fastener, 3-Month Warranty
Verified OEM 3104054N front outer left wheel nut for JAC N56 trucks. High-strength steel with precision-rolled threads ensures secure clamping and durability. Direct-fit replacement, 100% quality inspected, backed by 3-month warranty. Ideal for fleets and wholesalers.
Front Wheel Nut 3103204N for JAC N56/N721 — Verified OEM M24 Axle Fastener, 3-Month Warranty
Verified OEM 3103204N front wheel nut for JAC N56/N721/Shuailing Q6. M24 precision-rolled thread, approx. 36mm hex, 30mm height. 100% dimensionally inspected with Go/No-Go gauges. Cross-references HFN721LE and 313811-00118-001. IZUMI brand quality with 3-month warranty. Direct-fit, safety-critical fastener for fleet and wholesale supply.
Front Left Wheel Nut 3103204LD010 for JAC N56 — Verified OEM Axle Fastener, 3-Month Warranty
Verified OEM front left wheel nut 3103204LD010 for JAC N56 trucks. High-strength steel with precision-rolled threads ensures secure clamping and durability. 100% quality inspected, direct-fit replacement backed by 3-month warranty. Ideal for fleets and repair shops.
