Odometer Speed Sensor 3802950E800 for JAC N75/N80/N120/1081/1083 Truck — Verified OEM Direct-Fit 3-Pin Speed Sensor
Key Attributes
Product Summary
Verified OEM direct-fit 3-pin odometer speed sensor (3802950E800) for JAC N75/N80/N120/1081/1083 trucks. Bench-tested stable signal output, sealed housing for dusty/humid conditions, 12V DC. Plug-and-play install, no wiring mods. 6-month warranty, wholesale supply, custom packaging available.
Product Details
Odometer Speed Sensor 3802950E800
,JAC N75/N80/N120/1081/1083 Truck Sensor
,Verified OEM Direct-Fit 3-Pin Speed Sensor
The Odometer Speed Sensor Assembly with OEM number 3802950E800 is a verified direct-fit replacement for JAC trucks including the N75, N80, N120, 1081, and 1083 models. It is a critical component in the vehicle speed sensing system, responsible for measuring transmission output shaft speed and transmitting the signal to the instrument cluster and ECU for speedometer display, odometer accumulation, and cruise control operation.
How It Works: The sensor is mounted on the transmission and detects the rotation of a toothed wheel or magnetic target. It converts this rotation into an electrical pulse signal, which is transmitted to the ECU and instrument panel. A failed sensor causes incorrect speed readings, loss of odometer function, and cruise control disengagement.
- Real Bench Test Data: Signal output verified via in-house bench test against OEM pulse specification.
- Proven Durability: Rated for extended operation under normal conditions, based on accelerated aging test data.
- Installation Success Rate: 100% direct plug-in fitment with 3-pin connector, confirmed across multiple repair orders for JAC N75/N80/N120.
- OEM Cross-Reference Verified: Directly replaces OEM 3802950E800.
- Material Verification: High-strength aluminum alloy housing with precision bearings; 3-pin configuration confirmed by inspection report.
- Speedometer does not work or shows incorrect speed
- Odometer stops accumulating mileage
- Cruise control disengages or fails to engage
- Check Engine light or ABS error codes appear
- Intermittent speed signal loss over bumps or in humid conditions
| Part Number | 3802950E800 |
|---|---|
| Product Name | Odometer Speed Sensor |
| Car Model | JAC N75 / N80 / N120 / 1081 / 1083 |
| Engine Model | JAC N75 / N80 / N120 / 1081 / 1083 |
| Condition | 100% Brand New |
| Material | High-strength aluminum alloy & precision bearings |
| Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement |
| Quality Standard | OEM equivalent / ISO quality control |
| Weight | Standard |
| Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Package | Neutral packing or made as requested |
| Warranty | 6 Months |
| Price & Stock | Please contact us for more information |
Primary: 3802950E800
Additional cross-brand numbers may be available upon request. Always provide your VIN or chassis number for verification.
| Feature | Benefit & Verification Signal |
|---|---|
| OEM-matched fitment | Direct replacement for OEM 3802950E800 — verified against JAC N75/N80/N120/1081/1083 applications |
| 3-pin direct-fit connector | Plug-and-play replacement, no wiring modification — verified across multiple repair orders |
| Stable signal output | Accurate speedometer and odometer readings — verified by bench signal test |
| Sealed sensor housing | Reliable in dusty and humid conditions — verified by dust/ingress test |
| OEM-spec sensing element | Correct pulse signal for ECU and cruise control — verified by bench signal test |
| Compact transmission-mounted design | Easy installation, reduced labor time — high installation success rate across repair orders |
| QC Item | Verification Method |
|---|---|
| Signal output test | Bench test against OEM pulse specification |
| Connector pin continuity | Multimeter check, 100% inspection |
| Thermal cycling test | Temperature shock test |
| Housing sealing test | Dust/water ingress standard verification |
| Visual & dimensional inspection | Caliper/visual check, 100% factory inspection |
⚠️ Important: Disconnect the battery negative terminal before installation. Professional installation is recommended.
- Disconnect the battery negative terminal.
- Locate the speed sensor on the transmission (refer to vehicle manual).
- Disconnect the 3-pin connector and remove the old sensor (observe specified torque value).
- Clean the mounting bore and install the new sensor with O-ring/seal if applicable.
- Reconnect power and test speedometer, odometer, and cruise control functions during a test drive.
Inspect the sensor connector and mounting condition at regular service intervals. If speedometer faults occur, check the sensor, connector, and instrument cluster first.
- Individually packed in anti-static bag with foam protection; custom packaging available (MOQ applies).
- Suitable for: auto parts wholesalers, repair shops, and fleet procurement.
⚠️ Important Fitment Notes
HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily designed for ISUZU FSR 6HE1 applications; the above numbers are listed for customer cross-comparison.
If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. "Short" and "long" pushrod variants exist within the MC828264 family.
Always provide your VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
RELATED PRODUCTS
Left Front Door Lock Cylinder 3704940LE010 for JAC N56/N75/N80/N90 — Verified OEM Lock Set with Key, 3-Month Warranty
Direct-fit OEM 3704940LE010 left front door lock cylinder with matching key for JAC N56/N75/N80/N90/N120 & HFC1040S. Features precision-machined keyway, durable construction, 100% key-fit tested, and 3-month warranty. Ideal for wholesalers and fleet maintenance.
Front Outer Left Wheel Nut 3104054N for JAC N56 — Verified OEM Axle Fastener, 3-Month Warranty
Verified OEM 3104054N front outer left wheel nut for JAC N56 trucks. High-strength steel with precision-rolled threads ensures secure clamping and durability. Direct-fit replacement, 100% quality inspected, backed by 3-month warranty. Ideal for fleets and wholesalers.
Front Wheel Nut 3103204N for JAC N56/N721 — Verified OEM M24 Axle Fastener, 3-Month Warranty
Verified OEM 3103204N front wheel nut for JAC N56/N721/Shuailing Q6. M24 precision-rolled thread, approx. 36mm hex, 30mm height. 100% dimensionally inspected with Go/No-Go gauges. Cross-references HFN721LE and 313811-00118-001. IZUMI brand quality with 3-month warranty. Direct-fit, safety-critical fastener for fleet and wholesale supply.
Front Left Wheel Nut 3103204LD010 for JAC N56 — Verified OEM Axle Fastener, 3-Month Warranty
Verified OEM front left wheel nut 3103204LD010 for JAC N56 trucks. High-strength steel with precision-rolled threads ensures secure clamping and durability. 100% quality inspected, direct-fit replacement backed by 3-month warranty. Ideal for fleets and repair shops.
