Front Wheel Bearing Assembly 40210-3XA0A with GCr15 Bearing Steel for Nissan NV350 Caravan Urvan E26 - Pre-Greased and Sealed
| Cage Material: | Brass / Steel Plate / Nylon | Bearing Type: | Wheel Hub Unit Bearing (Double-Row) |
| Material: | GCr15 Bearing Steel / Chrome Steel | Load Capacity: | Designed For Commercial Vehicle Loads |
| Precision Grade: | P0 / P2 / P5 / P6 / P4 (OEM Standard Met) | Package Dimensions: | 14 × 14 × 18 Cm |
| Package Weight: | Approx. 3.0 Kg | H/S Code: | 8482.10 |
| High Light: | Front Wheel Bearing Assembly for Nissan NV350,GCr15 Bearing Steel Wheel Hub,Pre-Greased Sealed Bearing Assembly |
||
The front wheel bearing assembly with Nissan OEM number 40210-3XA0A is a complete hub unit bearing designed for the Nissan NV350 Caravan and Urvan commercial vans (E26 chassis). This factory-spec replacement integrates two sets of precision bearings into a single, sealed hub unit that supports vehicle weight and enables smooth wheel rotation with minimal friction.
| Part Number: | 40210-3XA0A | Product Name: | Front Wheel Bearing Assembly |
|---|---|---|---|
| Car Model: | Nissan NV350 Caravan Urvan E26 | Engine Model: | Nissan |
| Condition: | 100% Brand New | Size: | Standard |
| Weight: | Standard | Origin: | China Mainland |
| Main Market: | Middle East, Asia, Africa, South America, North America & Europe | ||
| Package: | Neutral Packing Or Make It As Requested | ||
| Material: | High-strength aluminum alloy & precision bearings | Cooling Type: | Engine coolant circulation |
| Installation: | Direct OEM replacement | Quality Standard: | OEM equivalent / ISO quality control |
This Nissan front wheel bearing assembly 40210-3XA0A is a direct replacement for the factory component on the following vehicles:
| Model | Chassis Code | Years |
|---|---|---|
| Nissan NV350 Caravan | E26 | 2012-present |
| Nissan Urvan (Bus/Van) | E26 | 2012-present |
The primary and confirmed application is the E26 generation of the NV350 Caravan and Urvan from 2012 onwards.
Pre-assembled hub unit bearing that integrates bearing races, rolling elements, and seals into a single component, significantly reducing labor time compared to traditional serviceable bearings.
Manufactured from high-carbon chromium GCr15 bearing steel, providing the hardness and wear resistance necessary to withstand the high loads of commercial van operation.
Sealed and pre-lubricated with high-quality grease at the factory, preventing contaminants from entering and ensuring proper lubrication for the entire service life.
Specifically engineered to handle substantial loads and stress of commercial operation, providing strength and reliability needed for daily delivery or passenger transport duty.
Carries the exact Nissan part number 40210-3XA0A and is a direct bolt-in replacement for the factory unit with no modifications required.
Eliminates bearing noise, removes steering wheel vibration, and restores safe, stable handling while preventing the safety risk of wheel detachment.
Each batch is manufactured under an ISO/TS16949 certified quality management system with the following verifications:
| QC Item | Verification Method |
|---|---|
| Material composition | Spectrographic analysis - GCr15 steel grade confirmed per batch |
| Dimensional accuracy | CMM inspection - hub, flange, and bearing seat dimensions verified against OE blueprint |
| Pre-load and running torque | Measured on assembly line - ensures correct bearing preload and smooth rotation |
| Noise and vibration | Run-out and acoustic testing - verified against OEM noise standards |
| Seal integrity | Pressure test - verifies seal prevents water and dust ingress |
A certificate of conformance (COC) with batch test data is available for wholesale orders upon request.
When to replace this wheel bearing assembly (symptoms):
| Symptom | Diagnosis |
|---|---|
| Droning, rumbling, or grinding noise from the front wheel that increases with vehicle speed | Worn bearing - immediate inspection required |
| Vibration felt through the steering wheel or floorpan | Bearing wear causing run-out - inspect and replace |
| Uneven or rapid tyre wear on the front tyres | Excessive wheel bearing play affecting alignment |
| Excessive play when the wheel is jacked up and rocked | Worn bearing - imminent failure risk |
| Visible grease leakage from the hub area | Failed seal - bearing contamination and failure imminent |
Critical installation notes for the NV350/Urvan:
- Use a hydraulic press - the hub bearing must be pressed in and out of the steering knuckle. Do not hammer the unit, as impact damage will cause immediate bearing failure.
- Clean the knuckle bore - thoroughly clean the steering knuckle bore before pressing in the new unit to ensure correct seating.
- Use the correct pressing tools - use a bearing press tool set that applies force only to the outer race of the bearing. Pressing on the inner race will damage the bearing.
- Torque to specification - tighten the axle nut to the Nissan factory torque specification using a torque wrench. Over-tightening will cause premature bearing failure.
- Do not disassemble the unit - the hub bearing is a sealed unit. Do not attempt to disassemble or adjust it.
- Replace in pairs if wear is even - while the front bearings can be replaced individually, it is recommended to replace both front wheel bearings at the same time if the vehicle has high mileage.
Maintenance schedule for NV350/Urvan front wheel bearings:
| Service Item | Interval |
|---|---|
| Listen for bearing noise during routine driving | Ongoing - address immediately if noise appears |
| Inspect for play and noise during wheel rotation | At every tyre rotation or brake service |
| Replace wheel bearing assembly | When noisy, has excessive play, or during a front-end overhaul at high mileage |
- Individual packaging: Sealed in anti-rust VCI bag, foam-lined carton
- Carton dimensions: 14 × 14 × 18 cm per unit
- Net weight: Approximately 3.0 kg
- Master carton: 20 units per export carton (palletisable)
- Lead time: 3-7 working days for stock orders; 15-25 days for production orders
- Minimum order quantity: 1 piece (sample order available)
- Shipping methods: FedEx, UPS, DHL for sample quantities; sea freight (LCL/FCL) from Shanghai, Ningbo, Guangzhou ports
- H/S Code: 8482.10
The Nissan front wheel bearing assembly 40210-3XA0A is an OEM-spec replacement for the NV350 Caravan and Urvan (E26 chassis, 2012-present). The GCr15 steel, pre-greased hub unit is maintenance-free, has a 3.0 kg weight, and is a direct fit. It eliminates grinding noises, steering vibrations, and the safety risk of wheel detachment.
Before ordering: Confirm your vehicle is an E26-generation NV350 Caravan or Urvan (2012 onwards). For earlier E25 models, verify the OE number before ordering.
Order a sample unit today - restore your NV350's front-end safety and handling with a single OEM-spec bearing assembly.
Aluminum Radiator 21460-ED100 / 21460-ED000 For Nissan Tiida & Versa — OEM Replacement Cooling System
21460-ED100 21460-ED000 Aluminum Radiator for Nissan Tiida Versa 1.6L 1.8L 2007-2009 — OEM Replacement Product Description The Aluminum Radiator with OEM reference numbers 21460-ED100 and 21460-ED000 is a verified direct-fit replacement for the Nissan Tiida (C11/JC11/NC11) and Nissan Versa (2007...
OEM-grade Cylinder Liner for Nissan SD25 2.5D Engine with Plateau Honed Surface and Centrifugal Casting
OEM-grade 11012-L2002 dry cylinder liner for Nissan SD25/SD23 engines. Made from centrifugally cast alloy iron with nitride layer for superior wear resistance. Plateau honed surface ensures optimal piston ring seating. Semi-finished at 88.0mm, requires final machining to 89.0mm. Direct fit for Atlas, Condor, forklifts.
OEM-grade Engine Overhaul Gasket Kit for Nissan ZD30DD 3.0D with 97mm Diameter Head Gasket
Complete A0101-VC128 engine overhaul gasket kit for Nissan ZD30DD 3.0D turbo-diesel engines. OEM-grade quality with all necessary gaskets, seals, and valve stem seals for full engine rebuild. Compatible with Navara D22, Terrano R20, Urvan E24, and QD32 engines.
King Pin Kit KP-143 For Nissan Condor LK MK Truck 40025-Z5028 35x206mm
King Pin Kit KP-143 For Nissan Condor LK MK Truck 40025-Z5028 35x206mm Product Description Function: Complete king pin repair kit for Nissan Condor LK/MK trucks. Includes king pin, bushings, bearings, seals, and hardware. Restores precise steering control and eliminates wheel play. Product ...
