V-Ribbed Belt Tensioner Byt-T069 504086948 081838 for FIAT Ducato 30, Ducato 35 2.3 Multijet Diesel Van — Verified OEM Replacement
Key Attributes
Product Summary
Verified OEM V-ribbed belt tensioner for FIAT Ducato 2.3 Multijet. Features die-cast aluminum bracket, high-fatigue torsion spring and double-lip sealed bearing for durability from -40℃ to +125℃. Direct bolt-on fit, 12-month/100,000 km warranty, custom packaging available.
Product Details
V-Ribbed Belt Tensioner Ducato
,OEM Replacement Tensioner 2.3 Multijet
,Belt Tensioner Byt-T069 504086948
New V-Belt Tensioner Assembly, OE 504086948 / 081838 — a direct-fit aftermarket spare part for FIAT Ducato 30 and Ducato 35 2.3 Multijet light commercial vans.
The V-ribbed belt tensioner assembly (OEM numbers 504086948, 081838; trade code Byt-T069) is a verified direct-fit replacement for FIAT Ducato 30 and Ducato 35 vans equipped with the 2.3 Multijet diesel engine. This tensioner is a critical component of the engine accessory drive system, responsible for automatically maintaining consistent tension on the multi-rib belt that drives the alternator, cooling fan, water pump and air conditioning compressor. It compensates for belt elongation caused by thermal expansion and repeated load changes during delivery operation.
- Real Bench Test Data: Tension fluctuation ≤ ±2.6% within the -40℃ to +125℃ working range — verified by a 600-hour thermal cycle bench test.
- Proven Durability: Rated service life up to 180,000 km under urban and highway delivery cycles — based on light commercial fleet maintenance records.
- Installation Success Rate: 99.3% bolt-on direct fit — confirmed across 350+ Ducato van repair orders.
- OEM Cross-Reference Verified: Interchangeable OE numbers: 504086948, 081838, 1611423880, APV1150, 534028010, 30170, T39137.
- Squealing or chirping noise on cold startup, acceleration or A/C activation
- Belt slippage leading to insufficient charging voltage and poor air conditioning cooling
- Internal torsion spring fatigue, loss of automatic tension adjustment
- Pulley bearing rumble, wobble, overheating or seizure
- Accelerated rib wear, cracking and unexpected belt breakage
| Part Number | 504086948 / 081838 | Product Name | V-Ribbed Belt Tensioner Byt-T069 |
|---|---|---|---|
| Car Model | FIAT Ducato 30, Ducato 35 2.3 Multijet Diesel Van | Engine Model | FIAT Ducato 30, Ducato 35 2.3 Multijet Diesel Van |
| Condition | 100% Brand New | Size | — |
| Weight | Standard | Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe | Package | Neutral packing or made as requested |
| Warranty | 6 Months | Price & Stock | Please contact us for more information |
| Material | High-strength aluminum alloy & precision bearings | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit + Verification Signal |
|---|---|
| Precision die-cast aluminum bracket | Lightweight, high rigidity and good heat dissipation for frequent start-stop delivery routes — verified by 800h vibration endurance test. |
| Pre-calibrated high fatigue torsion spring | Stable tension under variable load, reduces slip and squeal — verified by dynamic belt cycling test. |
| Double lip sealed bearing | Resists road dust, moisture and road salt corrosion — validated by ISO 9227 800-hour salt spray test. |
| Reinforced glass-filled PA pulley | Low noise, wear-resistant, matches rib profile perfectly to avoid belt flip and uneven abrasion — verified by CMM 3D dimensional inspection. |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily oriented toward ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
- If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. Both "short" and "long" pushrod variants exist within the MC828264 family.
- Always provide the VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
| QC Item | Verification Method |
|---|---|
| Bracket mounting hole geometry | CMM 3D coordinate measuring machine |
| Spring tension calibration | Special tension force tester |
| Bearing noise, clearance and rotation test | Automatic bearing performance tester |
| High-low temperature cycle aging | Thermal shock chamber (-40℃ ~ +125℃) |
| Vibration fatigue test | Electromagnetic vibration test bench |
| Surface coating & visual inspection | Full manual inspection before packing |
⚠️ IMPORTANT: Must be installed by professional LCV technicians. Follow the FIAT official service manual strictly.
- Use a dedicated tension release tool to release belt tension before disassembly.
- Remove the old tensioner and clean the mounting surface of rust and carbon residue.
- Fit the new tensioner and tighten the mounting bolt to 40 ±5 N·m.
- Install the multi-rib belt and ensure all ribs fully seat into the pulley grooves.
- Rotate the engine manually for 2 full revolutions and confirm free movement without binding before startup.
- Inspect the tensioner, pulley bearing and belt condition every 30,000 km.
- Recommended replacement together with the V-ribbed belt at 100,000 km, or when persistent squeal occurs.
- Neutral export carton with EPE foam and corner protector; custom branded packaging available for bulk orders.
- Suitable for: light commercial van repair shops, logistics fleet service centers, and European LCV spare parts distributors.