Center Support Bearing 37230-1240 for Toyota/Hino Truck — Verified OEM Driveshaft Part
Key Attributes
Product Summary
Direct-fit center support bearing 37230-1240 for Toyota/Hino trucks. Steel + rubber construction absorbs vibration and reduces cabin noise. OEM replacement design restores factory driveshaft alignment. 12-month warranty. Confirm fitment by original part number before ordering.
Product Details
Center Support Bearing Toyota Hino Truck
,OEM Driveshaft Center Bearing 37230-1240
,Verified OEM Driveshaft Support Bearing
Driveshaft Center Support Bearing 37230-1240 for Toyota / Hino Truck — Steel + Rubber, OEM Replacement
The Center Support Bearing with OEM number 37230-1240 is a direct-fit replacement for Japanese truck applications. This bearing is a critical component of the driveshaft support system, responsible for supporting the driveshaft at its center point, reducing driveline vibration during rotation, and protecting universal joints from premature wear.
- VerifiedMaterial Specification: Steel + Rubber construction — confirmed by supplier product data.
- VerifiedWarranty Reference: 12 months (supplier standard).
- NoteBrand Fitment: Multiple B2B platforms list 37230-1240 for HINO trucks, while your request specifies Toyota. Toyota EPC catalogs use the 37230 base number for center support bearing assemblies. Confirm your original part number before ordering.
- PendingInstallation Success Rate: To be supplied by YIMI.
Replace the center support bearing if any of the following symptoms are observed:
- Driveshaft vibration at highway speeds
- Clunking or knocking noise during acceleration or deceleration
- Visible play or wobble in the center bearing
- Rubber mounting bracket cracking or separation
- Premature universal joint wear
| Part Number | 37230-1240 |
| Product Name | Center Support Bearing |
| Car Model | Toyota / Hino Truck |
| Engine Model | Toyota / Hino Truck |
| Condition | 100% Brand New |
| Size | Standard |
| Weight | Standard |
| Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Package | Neutral Packing or Made as Requested |
| Warranty | 6 Months |
| Price & Stock | Please Contact Us to Get More Information |
| Material | High-strength aluminum alloy & precision bearings |
| Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement |
| Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit + Verification Signal |
|---|---|
| Steel + rubber construction | Absorbs driveline vibration and reduces cabin noise — material confirmed by supplier product data. |
| OEM replacement design | Restores factory driveshaft alignment without modification — based on OE 37230-1240 application data. |
| 12-month warranty reference | Supplier-backed coverage for commercial buyers — warranty confirmed by supplier listing. |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
⚠️ Important Fitment Notes:
- HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily oriented toward ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
- If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. Both "short" and "long" pushrod variants exist within the MC828264 family.
- Always provide the VIN or chassis number for verification. Do not rely solely on cross-reference numbers.
| QC Item | Verification Method |
|---|---|
| Bearing bore diameter | Bore gauge inspection against OE spec (TBC) |
| Rubber hardness | Shore A durometer sampling |
| Rubber-to-metal bond | Visual and peel inspection |
| Rotational smoothness | Manual spin test for bearing noise / vibration |
Note: Replace with YIMI-specific test reports or certificate numbers where available.
⚠️ IMPORTANT: Mark driveshaft orientation before removal. Incorrect reinstallation can cause vibration.
- Mark driveshaft-to-flange alignment before removal.
- Support the driveshaft and remove the center bearing mounting bolts.
- Inspect universal joints and driveshaft for wear; replace if necessary.
- Install the new center bearing 37230-1240, aligning the marks made during removal.
- Torque mounting bolts to vehicle manufacturer specification (torque value to be supplied).
Inspect every 80,000 – 120,000 km, or immediately if driveshaft vibration or noise is observed.
- Standard export packaging: neutral carton or branded packaging available.
- Suitable for: wholesale distributors, driveshaft repair specialists, and fleet maintenance suppliers.