Front Shock Absorber AB31-18-045D for Ford Ranger TKE T6 2011- — OEM Replacement, Verified Fitment
Key Attributes
Product Summary
OEM direct-fit front shock absorber AB31-18-045D for Ford Ranger TKE T6 2011- and Mazda BT-50. Gas-pressure construction ensures consistent damping and ride stability. Supplier claims ISO/TS16949 certification and 12-month/50,000 km warranty. Verify certificates and test reports before ordering.
Product Details
Front Shock Absorber Ford Ranger
,OEM Replacement AB31-18-045D
,Ford Ranger TKE T6 2011 Fitment
The Front Shock Absorber with OEM number AB31-18-045D (interchangeable with AB3118045D) is a direct-fit replacement for Ford Ranger TKE (T6) models from 2011 onward, and is also listed for Mazda BT-50 applications. Mounted on the front axle, this gas-pressure shock absorber controls spring oscillation, maintains tire contact with the road, and improves ride comfort and handling stability.
Working Principle: The shock absorber converts kinetic energy from suspension movement into heat via hydraulic fluid passing through valves. The gas charge (nitrogen) prevents fluid aeration and maintains consistent damping under repeated cycling. Worn or failed shocks allow excessive body movement, increase braking distance, and accelerate tire wear.
- ✅ Verified Fitment Verified: Multiple independent supplier catalogs list AB31-18-045D / AB3118045D as a front shock absorber for Ford Ranger TKE T6 2011- and Mazda BT-50.
- ✅ Claimed Supplier Quality Claims: One supplier (Banzhu) states ISO/TS16949 certification, 100% testing, and 12-month or 50,000 km warranty. Request actual certificate and test report before relying on these claims.
- ⚠️ Pending Damping & Durability Data Pending: No public damping force curves, piston rod diameter/hardness, or salt spray test data available for this OEM number. Request from supplier: dyno test report, material certificate, salt spray results.
- ⚠️ Pending Installation Success Rate Pending: No repair order statistics available.
When this shock absorber fails, typical signs include:
- Excessive bouncing or floating after bumps
- Nose-dive under braking or squat under acceleration
- Visible fluid leak (oil residue on shock body)
- Uneven tire wear (cupping or scalloping)
- Clunking or knocking noise from the front suspension
| Part Number | AB31-18-045D | Product Name | Front Shock Absorber |
|---|---|---|---|
| Car Model | Ford Ranger TKE T6 2011 | Engine Model | Ford Ranger TKE T6 2011 |
| Condition | 100% Brand New | Size | — |
| Weight | Standard | Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe | Package | Neutral Packing Or Make It As Requested |
| Warranty | 6 Months | Price & Stock | Please Contact Us To Get More Information |
| Material | High-strength aluminum alloy & precision bearings | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit + Verification Signal |
|---|---|
| OEM number matched | Direct replacement for AB31-18-045D / AB3118045D — cross-verified by multiple supplier catalogs |
| Gas pressure construction | Maintains consistent damping under load and heat — damping force test data required from supplier |
| Supplier warranty (12 months / 50,000 km) | Purchase confidence for initial quality — offered by Banzhu supplier; confirm terms in writing |
| ISO/TS16949 claimed | Quality management system certification — request certificate copy from supplier |
| QC Item | Verification Method |
|---|---|
| Damping force (dyno) | Request dyno test report (compression/rebound curves) |
| Piston rod diameter & hardness | Request dimensional and hardness inspection report |
| Fluid leak / seal integrity | Request pressure decay or leak test data |
| Salt spray (coating) | Request salt spray test report (hours to red rust) |
| Mounting dimensions | Request dimensional drawing and compare against original |
- Support the vehicle and relieve load from the front suspension.
- Remove the upper and lower mounting bolts/nuts.
- Compress the new shock absorber by hand to verify smooth operation before installation.
- Install in reverse order; torque mounting fasteners to TBC — refer to Ford Ranger TKE service manual.
- Lower the vehicle and bounce the front end to settle the suspension.
Inspect shocks for fluid leaks and mounting bush wear every 20,000–30,000 km or if ride quality deteriorates.
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
- HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily oriented toward ISUZU FSR 6HE1 fitment, while the above numbers are listed for customer cross-reference.
- If your vehicle is a Mitsubishi Fuso FK/FM with MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. The "short" vs "long" pushrod variants exist within the MC828264 family.
- Always provide VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
RELATED PRODUCTS
Upper Ball Joint AB31-34-550-A / AB31-34-540-A for Ford Ranger TKE 2011-2019 — OEM Replacement, Verified Fitment
OEM-matched upper ball joints AB31-34-550-A / AB31-34-540-A for Ford Ranger TKE 2011-2019 and Mazda BT-50. Direct press-in fitment, ball-and-socket construction for reliable suspension articulation. ISO quality control, neutral or custom packing, 6-month warranty. VIN verification recommended before ordering.
404SHJ-WC4282 Brake Wheel Cylinder 23.81mm Bore Rear Left for FORD P100 Transit OEM Replacement
Verified OEM replacement brake wheel cylinder for FORD P100 II & Transit E Chassis (1987–1994). Features 23.81mm precision bore, durable cast iron body, and EPDM seals. Direct-fit, cross-referenced to 6150112, TRW BWK131. 100% leak-tested with 6-month warranty. Ideal for wholesalers and repair shops.
Engine Piston Assembly BK2Q-11-SAO For FORD RANGER 2.2T P4AT T6 PX1 PX2 PX3 Mazda BT-50 2011-2022 — 4pcs STD 86mm Alfin Cooling Gallery Verified OEM Fit
BK2Q-11-SAO 4-piston set for Ford Ranger 2.2T P4AT & Mazda BT-50 2011-2022. STD 86mm, Alfin insert, cooling gallery, anodized crown. OEM-verified fit, 12-month warranty. Rings sold separately.
Front Absorber Bearing ABMK000015 For Ford Fiesta 1.4 2008-2019 D651-34-38XC
Front Absorber Bearing ABMK000015 For Ford Fiesta 1.4 2008-2019 D651-34-38XC Product Overview Precision-engineered front strut mount bearing allows smooth steering rotation and absorbs suspension impacts, ensuring comfortable ride quality and stable handling for Ford Fiesta vehicles. The Front ...
