Steering Column Assembly 3402001LD010 for JAC Light Truck — Verified Adjustable Mechanism, OEM Genuine Accessory, 98.5% Fitment Rate
Key Attributes
Product Summary
OEM Genuine Steering Column Assembly 3402001LD010 for JAC N-Series light trucks. Features adjustable tilt/telescopic mechanism, high-strength steel tube, die-cast aluminum housing. Verified 50,000-cycle fatigue test, 98.5% fitment rate, 12-month warranty. Direct bolt-on replacement.
Product Details
Steering Column Assembly for JAC Light Truck
,Adjustable Steering Column OEM Genuine
,JAC Light Truck Steering Column Spare Part
OEM GENUINE The Steering Column Assembly 3402001LD010 is a verified direct-fit replacement for JAC N-Series light trucks. This genuine accessory features an adjustable tilt/telescopic mechanism, allowing the driver to customize the steering wheel position for optimal comfort and control. As a critical component of the steering system, it transmits the driver's steering input to the steering gear while housing the ignition switch, turn signal stalk, and other controls.
- Real Bench Test Data: The adjustable mechanism passed 50,000 tilt/telescopic cycles with no play or locking failure — verified on a mechanical fatigue test bench according to ISO 26262 standards.
- Proven Durability: The steering shaft splines are rated for 300,000 steering cycles with torque loss under 2% — based on 18-month fleet tracking data from 12 JAC commercial vehicles.
- Installation Success Rate: 98.5% direct bolt-on fitment — confirmed across 600+ repair orders in West Africa and the Middle East.
- OEM Cross-Reference Verified: Replaces JAC OEM 3402001LD010. The genuine accessory label confirms compatibility with JAC N-Series models.
- Steering wheel has excessive up-down or in-out play (worn adjustment mechanism)
- Steering wheel wobbles or feels loose while driving
- Difficulty locking the steering wheel in the desired position
- Abnormal clicking or grinding noise when turning the wheel
- Ignition switch or turn signal malfunction due to column internal damage
| Part Number | 3402001LD010 | Product Name | Steering Column Assembly |
|---|---|---|---|
| Car Model | JAC Light Truck | Engine Model | JAC Light Truck |
| Condition | 100% Brand New | Size | Standard |
| Weight | Standard | Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe | ||
| Package | Neutral Packing Or Make It As Requested | Warranty | 6 Months |
| Price & Stock | Please Contact Us To Get More Information | ||
| Material | High-strength aluminum alloy & precision bearings | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit + Verification Signal |
|---|---|
| Adjustable tilt/telescopic mechanism | Customizable driving position for comfort — verified by 50,000-cycle fatigue test. |
| High-strength steel tube construction | Superior impact resistance and durability — verified by 300,000 steering cycle test (torque loss <2%). |
| Die-cast aluminum adjustment housing | Lightweight yet robust locking mechanism — verified by 500-hour salt spray test (ASTM B117). |
| OEM Genuine Accessory design | Perfect fit and original performance — verified by 98.5% bolt-on fitment rate. |
| Integrated wiring harness mounts | Easy installation of ignition switch and controls — verified by 600+ repair orders. |
| QC Item | Verification Method |
|---|---|
| Dimension accuracy | CMM full-dimension inspection against OEM drawings |
| Adjustment mechanism fatigue | 50,000-cycle tilt/telescopic bench test |
| Steering shaft torque | Torque test bench (measured loss <2%) |
| Material hardness | Rockwell hardness tester (HRC 35-40) |
| Surface corrosion resistance | 500-hour neutral salt spray test (ASTM B117) |
| Electrical continuity | Multimeter continuity test for ignition and signal wires |
- Disconnect the battery negative terminal and wait 10 minutes for airbag discharge.
- Remove the lower dashboard trim and disconnect the steering column wiring harness.
- Remove the steering wheel and airbag (use a steering wheel puller).
- Unbolt the column from the dashboard support bracket (torque: 20–25 N·m).
- Disconnect the universal joint from the steering gear input shaft.
- Install the new column 3402001LD010, align the splines, and tighten all bolts.
- Reconnect wiring, install the steering wheel, and check alignment.
- Check the adjustment mechanism locking function every 20,000 km.
- Inspect the universal joint and splines for wear every 40,000 km.
- Lubricate the adjustment mechanism pivot points every 60,000 km.
- Each unit is packed in a reinforced carton with foam and anti-rust paper protection.
- Suitable for: Auto repair shops, fleet maintenance centers, JAC parts wholesalers.
RELATED PRODUCTS
Front Bumper Bracket 2803200LD010 for JAC HFN*21 Shuailing III — Verified OEM Steel Bracket, Direct-Fit Collision Repair Part
Verified OEM 2803200LD010 left front bumper bracket for JAC HFN*21 Shuailing III. Made from 2.5mm SPCC cold-rolled steel with E-coat anti-corrosion finish, passing 480-hour salt spray test. Achieves 99.2% direct bolt-on fitment rate across 500+ repair orders. Restores original bumper alignment and impact absorption. 12-month warranty, neutral or custom packaging available for wholesale export.
Right Turn Signal Assembly 4111020LE190 for JAC N56 Light Truck — Verified OEM Lamp, Amber Lens, ISO/TS16949 Certified
Verified OEM right turn signal assembly 4111020LE190 for JAC N56 light trucks. Features IP67 waterproof sealed housing, UV-resistant amber lens, and durable plastic construction for reliable all-weather visibility. ISO/TS16949 certified with 98% plug-and-play fitment. Direct replacement, no modification needed.
Left Turn Signal Assembly 4111010LE190 for JAC N56 N75 N80 N120 — Verified OEM Lamp, Amber Lens, IP67 Waterproof
Verified OEM left turn signal assembly 4111010LE190 for JAC N56/N75/N80/N120. Features IP67 waterproof sealed housing, UV-tested amber lens, and durable plastic build for reliable visibility. Direct plug-and-play fitment with corrosion-resistant contacts. 6-month warranty; custom packing available.
Ignition Key Assembly 3704910LE010 for JAC N56 N75 N80 N90 N120 — Verified OEM Lock Set with 2 Keys, ISO/TS16949 Certified
Verified OEM ignition lock assembly 3704910LE010 for JAC N56-N120 trucks. Features die-cast zinc housing, brass contacts tested to 100,000 cycles (<50mΩ), and 50,000 key cycles. ISO/TS16949 certified, includes 2 keys, 98.5% fitment rate. 12-month warranty.
