OEM 0129760010 Drive Side Shaft Half Shaft Metal Construction for Yuejin NJ1020 Truck Direct Fit Axle Shaft

Function :

The Drive Side Shaft (Half Shaft) with OEM number 0129760010 is a direct-fit replacement axle shaft for Yuejin NJ1020 light trucks. This half shaft transmits driving torque from the differential to the wheel hub, enabling vehicle propulsion.

Working Principle: The half shaft connects the differential side gear to the wheel hub. As the differential rotates, the half shaft transfers torque to the wheel, driving the vehicle forward or in reverse. The shaft must withstand torsional stress, bending loads, and spline wear. A failed or worn half shaft causes vibration, clicking noise during turns, or loss of drive.

Verifiable Signals

• ✅ OEM Number: 0129760010 — confirmed across multiple independent suppliers 

• ✅ Part Name: Drive Side Shaft / Half Shaft — confirmed in English, Spanish, Italian listings

• ✅ Vehicle Compatibility: Yuejin NJ1020 — confirmed 

• ✅ Material: Metal — per Shaanxi Leading listing

• ✅ Place of Origin: Anhui, China — per Shaanxi Leading listing

• ✅ Warranty: 3 months — per Shaanxi Leading listing

• ✅ Delivery: 7–15 days — per Shaanxi Leading listing

• ✅ MOQ: 5 pcs — per Shaanxi Leading listing

• ⚠️ Pending: Shaft length, spline tooth count, shaft diameter, weight — not specified in available sources

• ⚠️ Pending: Bench test data (torsional strength, fatigue cycles) — recommend supplying your own test report

• ⚠️ Pending: Installation success rate — recommend providing repair order statistics

Failure Symptoms

• Clicking or popping noise during turns (worn CV joint or spline)

• Vibration during acceleration

• Loss of drive to one wheel

• Visible wear, twist, or breakage of the shaft

• Grease leakage from CV boot (if equipped)

Features & Advantages 

• Brand	Model	Engine Code	Notes
  ISUZU	FSR / FSR 500	6HE1	Primary fitment per OEM number
  ISUZU	FVR / FTR	6HE1 (verify)	Some cross-applications reported; confirm by VIN

  ⚠️ Important Fitment Notes:

  • HDA-008 / MC828264 是售后交叉参考编号,主要在三菱 Fuso 制动助力器目录中出现.本产品以 ISUZU FSR 6HE1 为主适配方向,同时列出上述编号供客户交叉比对.

  • If your vehicle is a Mitsubishi Fuso FK/FM with MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. The “short" vs “long" pushrod variants exist within the MC828264 family .

  • Always provide VIN/chassis number for verification. Do not rely solely on cross-reference numbers.

✅ Features & Benefits

✅ Quality Control & Verification

✅ Installation & Maintenance Recommendations

⚠️ IMPORTANT: Half shaft replacement requires raising the vehicle and removing the wheel and brake components. Inspect the differential side gear and wheel hub splines for wear before installing the new shaft. Professional installation recommended.

Installation Guidelines (Reference Yuejin workshop manual):

1. Raise vehicle and secure on stands. Remove wheel.

2. Remove brake caliper and disc/rotor if necessary for access.

3. Disconnect half shaft from wheel hub and differential (method varies by axle design).

4. Remove old half shaft. Inspect splines on both ends for wear.

5. Install new half shaft. Ensure splines engage fully.

6. Reassemble brake components and wheel.

7. Lower vehicle. Test drive and check for vibration or noise.

Maintenance Schedule: Inspect half shafts for grease leakage, boot damage (if CV type), and noise during turns at every major service. Replace when clicking, vibration, or visible damage is detected. Check differential oil level periodically.

✅ Packaging & Supply

• Carton packaging

• Suitable for: Wholesale distributors, axle repair workshops, Yuejin parts suppliers

• MOQ: 5 pcs

• Price range: $20–$50 per piece (reference)

• Delivery: 7–15 days