Front Brake Wheel Cylinder MK356644 MK-356644 For Mitsubishi Fuso Canter FE85/FE659/FE7xx/FE8xx & Rosa 4M50 — OEM Front Right Hand (RH) 1-1/4″ Bore Cast Iron Drum Brake Cylinder
| Features: | Self-Adjusting | OEM Part Number: | MK356644 / MK-356644 |
| Part Name: | Brake Wheel Cylinder / CYLINDER, BRAKE WHEEL | Fitting Position: | Front Axle, Right Hand (RH) |
| Bore Diameter: | 1-1/4″ (31.75mm) | Bleeder Screw: | Included |
| Vehicle Compatibility: | Mitsubishi Fuso Canter FE85, FE659, FE7xx, FE8xx, Rosa Bus | Chassis Compatibility: | FE70, FE82, FE83, FE84, FE85, FE659, FE859, FE53, FE63, FE73 |
| Engine Compatibility: | Mitsubishi 4M50 (Euro 3/4) | Condition: | Brand New — 100% Quality Inspected |
| Warranty: | 12 Months / 20,000 Km | ||
| High Light: | Mitsubishi Fuso Canter brake cylinder,cast iron drum brake cylinder,OEM front right brake cylinder |
||
The Front Brake Wheel Cylinder with OEM number MK356644 (also listed as MK-356644) is a verified OEM-grade direct replacement for a wide range of Mitsubishi Fuso Canter light and medium-duty trucks, including FE85, FE659, FE7xx, FE8xx series and Rosa buses. Manufactured to Mitsubishi's stringent OEM specifications, this cylinder is a critical component of the front drum brake system that converts hydraulic pressure from the brake master cylinder into mechanical force, pushing the brake shoes against the drum to provide safe and reliable stopping power.
| Model / Chassis | Series / Notes |
|---|---|
| FE85 | Primary application |
| FE659 | Compatible |
| FE7xx / FE8xx | Compatible series |
| FE649 | Compatible |
| FE85P | Compatible |
| Rosa Bus | Compatible |
- This brake wheel cylinder is specifically for the Front Right-Hand (RH) position
- The Front Left-Hand (LH) counterpart is MK356643
- Compatible with Mitsubishi Fuso Canter models with 4M50 engines (Euro 3/4)
- Bore Diameter: 1-1/4″ (31.75mm) - verify your vehicle's brake system specifications before ordering
- It is strongly recommended to replace brake wheel cylinders in pairs for balanced braking performance
- Please verify your vehicle's chassis code, production year, and VIN before ordering
If your front brake wheel cylinder is failing, you may experience one or more of the following symptoms:
- Brake Fluid Leakage: Visible fluid seeping from the front wheels or inside the brake drum - indicates worn seals
- Soft or Spongy Brake Pedal: Pedal feels unusually soft or goes to the floor - indicates internal seal failure
- Reduced Braking Performance: Vehicle takes longer to stop or requires increased pedal pressure
- Uneven Braking: Vehicle pulls to one side during braking - indicates a seized or leaking cylinder on one side
- Contaminated Brake Shoes: Brake fluid soaking into the brake shoes, causing reduced friction and brake fade
Guarantees factory-fit quality and performance - verified by OEM part number MK356644 and cross-references BS1553, SW-M1261, MC889510, GC051.
Delivers consistent hydraulic pressure for reliable braking performance - verified by dimensional specifications.
Provides exceptional durability and heat dissipation under demanding commercial conditions.
Self-adjusting design maintains optimal brake shoe clearance - reduces maintenance frequency.
Complete replacement solution - facilitates easy brake system bleeding.
No modifications required - engineered as a direct match for the original cylinder.
Guarantees dependable operation and leak-free performance - verified by quality assurance testing.
Guarantees zero wear, immediate braking performance, and full service life - no core deposit required.
| QC Item | Verification Method |
|---|---|
| Dimensional Accuracy | Precision inspection to verify 1-1/4″ (31.75mm) bore diameter and mounting hole spacing match OE blueprint specifications. |
| Material Composition | Cast iron analysis to verify structural integrity and heat dissipation characteristics. |
| Bore Surface Test | 100% surface testing to ensure optimum sealing surface for pressure cups. |
| Leakage Test | 100% hydraulic pressure test to guarantee zero fluid leakage under operating conditions. |
| Rubber Component Test | EPDM material verification for heat and corrosion resistance. |
| Durability Cycle Test | 500+ hour fatigue testing to verify long-term reliability under commercial vehicle operating conditions. |
| Final Assembly Inspection | 100% visual and functional inspection before packaging. |
Replacing brake wheel cylinders is a critical safety procedure. It is strongly recommended to replace them in pairs (both front wheels) for balanced braking performance.
- Safely raise the vehicle and support it on jack stands
- Remove the front wheels and brake drums to access the wheel cylinders
- CRITICAL: This is the Front Right (RH) cylinder - the LH counterpart is MK356643
- Inspect brake shoes, drums, and hardware for wear - replace as necessary
- Use new brake fluid (DOT 3 or DOT 4) from a sealed container
- Critical: Replace wheel cylinders in pairs (both front wheels) for balanced braking performance
- Inspection: Every 50,000 km / 12 months. Check for fluid leaks, brake pedal feel, and braking performance
- Fluid Replacement: Every 2 years or 40,000 km - replace brake fluid to prevent internal corrosion
- Replacement: Immediately if failure symptoms appear. Replace in pairs for balanced braking
- Packaging: Each brake wheel cylinder is securely packed in protective packaging to prevent shipping damage
- Package Contents: 1 Brake Wheel Cylinder (Bleeder screw included)
- Weight: Approx. 1.75 - 2.013 kg
- Warranty: 12 months
- Suitable for: Wholesale distributors, truck parts retailers, commercial vehicle repair shops, and fleet owners
Rear Brake Wheel Cylinder MK356641 MK-356641 For Mitsubishi Fuso Canter FE70/FE82/FE83/FE84/FE85 & Rosa Bus — OEM Rear Left Hand (LH) 1-1/4" Bore Cast Iron Drum Brake Cylinder
Rear Brake Wheel Cylinder MK356641 MK-356641 For Mitsubishi Fuso Canter FE70/FE82/FE83/FE84/FE85 & Rosa Bus — OEM Rear Left Hand (LH) 1-1/4" Bore Cast Iron Drum Brake Cylinder Product Overview The Rear Brake Wheel Cylinder with OEM number MK356641 (also listed as MK-356641) is a verified OEM-grade ...
Front Brake Wheel Cylinder MK356643 MK-356643 For Mitsubishi Fuso Canter FE84D / FE659 / FE85 / FE7xx / FE8xx — OEM Front Left Hand (LH) 1-1/4″ Bore Cast Iron Drum Brake Cylinder
Front Brake Wheel Cylinder MK356643 for Mitsubishi Fuso Canter Product Overview The Front Brake Wheel Cylinder MK356643 (also listed as MK-356643) is a verified OEM-grade direct replacement for a wide range of Mitsubishi Fuso Canter light and medium-duty trucks. Manufactured to Mitsubishi's ...
Rear Brake Wheel Cylinder MK356640 MK-356640 For Mitsubishi Fuso Canter FE/FG Series & Rosa Bus 4D31/4D34/4M42 — OEM Rear Right Hand (RH) Forward 1-1/4″ Bore Cast Iron Drum Brake Cylinder
Brake Wheel Cylinder MK356640 for Mitsubishi Fuso Canter Rosa — OEM Rear RH 1-1/4″ ✅ Product Description The Rear Brake Wheel Cylinder with OEM number MK356640 (also listed as MK-356640 ) is a verified OEM-grade direct replacement for a wide range of Mitsubishi Fuso light and medium-duty trucks, ...
Rear Brake Wheel Cylinder MB060580 MB-060580 For Mitsubishi Canter FE/FE2/FE3/FE4/FE5/FE6 & Rosa 4D31/4D32/4D34 — OEM Cast Iron 1-1/8″ Bore Drum Brake Cylinder (Rear Left)
Rear Brake Wheel Cylinder MB060580 MB-060580 For Mitsubishi Canter FE/FE2/FE3/FE4/FE5/FE6 & Rosa 4D31/4D32/4D34 — OEM Cast Iron 1-1/8″ Bore Drum Brake Cylinder (Rear Left) Product Overview The Rear Brake Wheel Cylinder with OEM number MB060580 is a verified OEM-grade direct replacement for a wide ...
