Rear Brake Wheel Cylinder MK356639 MK-356639 For Mitsubishi Fuso Canter FE/FG Series & Rosa Bus 4D31/4D34/4M42 — OEM Rear Left Hand (LH) Forward 1-1/4" Bore Cast Iron Drum Brake Cylinder
| OEM Part Number: | MK356639 / MK-356639 | Part Name: | Brake Wheel Cylinder / CYLINDER ASSY, RR BRAKE |
| Fitting Position: | Rear Axle, Left Hand (LH), Forward | Bore Diameter: | 1-1/4″ (31.75mm) |
| Material: | High-Grade Cast Iron | Weight: | Approx. 1.86 Kg |
| Bleeder Screw: | Included | Chassis Compatibility: | FE53C, FE53E, FE533, FE548, FE562, FE566, FE567, FE568, FE63D, FE63E, FE648, FE652, FE658, FE659, FE668; FE85P; FE84B Hybrid; FE7xx/FE8xx |
| Engine Compatibility: | Mitsubishi 4D31, 4D34, 4M42 | Vehicle Compatibility: | Mitsubishi Fuso Canter, Rosa |
| Production Years: | 1999–2008 | Condition: | Brand New — 100% Quality Inspected |
| Warranty: | 12 Months | ||
| High Light: | Mitsubishi Fuso Canter brake cylinder,OEM rear brake wheel cylinder,cast iron drum brake cylinder |
||
The Rear Brake Wheel Cylinder with OEM number MK356639 (also listed as MK-356639) is a verified OEM-grade direct replacement for a wide range of Mitsubishi Fuso light and medium-duty trucks, including the Canter (FE/FG series) and Rosa buses.
| Part Number | MK356639 MK-356639 |
| Product Name | Rear Brake Wheel Cylinder |
| Car Model | Mitsubishi Fuso Canter FE/FG Series & Rosa Bus |
| Engine Model | Mitsubishi 4D31/4D34/4M42 |
| Condition | 100% Brand New |
| Material | High-strength cast iron with corrosion-resistant coating |
If your rear brake wheel cylinder is failing, you may experience one or more of the following symptoms:
- Brake Fluid Leakage: Visible fluid seeping from the rear wheels or inside the brake drum
- Soft or Spongy Brake Pedal: Pedal feels unusually soft or goes to the floor
- Reduced Braking Performance: Vehicle takes longer to stop or requires increased pedal pressure
- Uneven Braking: Vehicle pulls to one side during braking
- Contaminated Brake Shoes: Brake fluid soaking into the brake shoes, causing reduced friction
| Model | Chassis / Series | Years / Notes |
|---|---|---|
| Canter FE659 | FE659-11 | -- |
| Canter FE859 | FE859-11 | -- |
| Canter FE85P | FE85P-5 | 2005-2008 |
| Canter FE84B Hybrid | FE84B-5 | 05/2009 |
| Canter | FE53C, FE53E, FE533, FE548, FE562, FE566, FE567, FE568 | -- |
| Canter | FE63D, FE63E, FE648, FE652, FE658, FE659, FE668 | -- |
| Canter | FE7xx / FE8xx | -- |
| Rosa Bus | BE649, BE64DJ-5 | 1999-2011 |
| Rosa Bus | Rosa | -- |
Guarantees factory-fit quality and performance
Delivers consistent hydraulic pressure for reliable braking
Exceptional durability and heat dissipation
Long-lasting durability in harsh environments
Complete replacement solution
Guarantees leak-free performance
| QC Item | Verification Method |
|---|---|
| Dimensional Accuracy | Precision inspection to verify 1-1/4″ bore diameter and mounting specifications |
| Material Composition | Cast iron analysis for structural integrity and heat dissipation |
| Bore Surface Test | 100% surface testing for optimum sealing surface |
| Leakage Test | 100% hydraulic pressure test for zero fluid leakage |
| Durability Cycle Test | 500+ hour fatigue testing for long-term reliability |
Replacing brake wheel cylinders is a critical safety procedure. It is strongly recommended to replace them in pairs for balanced braking performance.
Installation Guidelines:
- Safely raise the vehicle and support it on jack stands
- Remove rear wheels and brake drums
- Disconnect brake line from old wheel cylinder
- Remove mounting bolts and old cylinder
- Install new cylinder with NEW mounting bolts
- Torque mounting bolts to manufacturer's specifications
- Reconnect brake line and torque to specification
- Bleed brake system thoroughly
- Refill with fresh DOT 3 or DOT 4 brake fluid
Maintenance Schedule:
- Inspection: Every 50,000 km / 12 months
- Fluid Replacement: Every 2 years or 40,000 km
- Replacement: Immediately if failure symptoms appear
- Packaging: Protective packaging to prevent shipping damage
- Package Contents: 1 Brake Wheel Cylinder (Bleeder screw included)
- Weight: Approx. 1.86 kg
- Warranty: 12 Months / 20,000 km
- Suitable for: Wholesale distributors, truck parts retailers, commercial vehicle repair shops, and fleet owners
Rear Brake Wheel Cylinder MB060580 MB-060580 For Mitsubishi Canter FE/FE2/FE3/FE4/FE5/FE6 & Rosa 4D31/4D32/4D34 — OEM Cast Iron 1-1/8″ Bore Drum Brake Cylinder (Rear Left)
Rear Brake Wheel Cylinder MB060580 MB-060580 For Mitsubishi Canter FE/FE2/FE3/FE4/FE5/FE6 & Rosa 4D31/4D32/4D34 — OEM Cast Iron 1-1/8″ Bore Drum Brake Cylinder (Rear Left) Product Overview The Rear Brake Wheel Cylinder with OEM number MB060580 is a verified OEM-grade direct replacement for a wide ...
Clutch Master Cylinder ME636075 ME-636075 For Mitsubishi Fuso FK617 Fighter 220P 10.5T & FK/FM/FN Series — OEM 3/4″ Cast Iron Hydraulic Clutch Actuator
Clutch Master Cylinder ME636075 ME-636075 For Mitsubishi Fuso FK617 Fighter 220P 10.5T & FK/FM/FN Series — OEM 3/4″ Cast Iron Hydraulic Clutch ActuatorProduct OverviewThe Clutch Master Cylinder with OEM number ME636075 (also listed as ME-636075) is a verified OEM-grade direct replacement for a wide ...
Concentric Clutch Slave Cylinder ME540222 ME-540222 For Mitsubishi Fuso Canter FEA21/FEC81 FE85S 4P10/4M42 2011-Onwards — OEM Hydraulic Release Bearing Assembly
Concentric Clutch Slave Cylinder ME540222 ME-540222 For Mitsubishi Fuso Canter Product Overview The Concentric Clutch Slave Cylinder (Hydraulic Release Bearing Assembly) with genuine Mitsubishi OEM number ME540222 (also listed as ME-540222) is a verified OEM-grade direct replacement for a wide range ...
Clutch Master Cylinder ME507173 ME-507173 For Mitsubishi Fuso Canter FE657/FE85P/FE83P 4D34/4M42/4M50 — OEM 7/8″ Aluminium Alloy Clutch Master Cylinder
Clutch Master Cylinder ME507173 ME-507173 For Mitsubishi Fuso Canter FE657/FE85P/FE83P 4D34/4M42/4M50 — OEM 7/8″ Aluminium Alloy Clutch Master Cylinder Product Overview The Clutch Master Cylinder with Genuine Mitsubishi OEM number ME507173 (also listed as ME-507173) is a verified OEM-grade direct ...
