325mm Heavy Duty Clutch Cover Pressure Plate OEM Specification for Mitsubishi Fuso Canter FE72DEV
| P.C.D.: | 368 Mm | Inner Diameter: | 210 Mm |
| Outer Diameter: | 325 Mm | Matching Clutch Disc: | ME517724 (325 Mm) |
| Engine Compatibility: | Mitsubishi 4M50 4.9L Common Rail Turbo-diesel (4,899 Cc) | Matching Release Bearing: | ME538345 |
| Material: | High-strength Aluminum Alloy & Precision Bearings | Net Weight: | 8-10 Kg |
| High Light: | 325mm heavy duty clutch cover,Mitsubishi Fuso Canter clutch plate,OEM specification pressure plate |
||
The clutch cover (clutch pressure plate) with OEM number ME512211 is a heavy-duty replacement for the clutch system in Mitsubishi Fuso Canter medium-duty trucks, specifically the FE72DEV chassis and related FE-series models. This component provides the clamping force that holds the clutch disc against the flywheel, transmitting engine torque to the transmission. The MFC590 is the aftermarket reference number for this same pressure plate, supplied by manufacturers such as EXEDY, VALEO, and LUK.
This clutch cover is built for the 4M50 4.9L common rail turbo-diesel engine (4,899 cc, direct-injection) found in the FE72DEV and FE85D chassis. It features a 325 mm outer diameter - significantly larger than light-duty clutch plates - providing the torque capacity required for commercial vehicle operation at or near GVWR.
| Part Number: | ME512211 MFC590 | Product Name: | Clutch Cover |
| Car Model: | Mitsubishi Fuso Canter | Engine Model: | Mitsubishi 4M50 |
| Condition: | 100% Brand New | Size: | Standard |
| Material: | High-strength aluminum alloy & precision bearings | Installation: | Direct OEM replacement |
This Mitsubishi Fuso Canter clutch cover ME512211 directly replaces the factory component in the following configurations:
| Chassis / Model | Engine | Years / Notes |
|---|---|---|
| FE72DEV | 4M50 4.9L DiTD | 2004-2008 (PA-FE72DEV) |
| FE85D | 4M50 4.9L DiTD | 2004-2008 |
| FE84D | 4M50 4.9L DiTD | 2004-2008 |
- Displacement: 4,899 cc (4.9L)
- Fuel System: Direct-Injection
- Transmission: Manual
- Drive: 2WD (RWD)
The matching clutch disc for this cover is ME517724 (325 mm diameter), and the matching release bearing is ME538345. For a complete clutch system overhaul, all three components should be replaced together.
The ME512211 clutch cover is interchangeable with the following numbers:
| OE Number / Reference | Brand / Notes |
|---|---|
| ME512211 | Primary (this product) |
| MFC590 | Aftermarket (EXEDY / VALEO / LUK) |
| 30210-Z5068 | Interchange |
| 30210-Z5105 | Interchange |
| 30210-Z5104 | Interchange |
| NDC536 | Interchange |
| MFC521 | Interchange |
| 906121 | Interchange |
| 017-TYC518 | Interchange |
| T210A68 | Interchange |
| J2102011 | Interchange |
| 3082 781 001 | Interchange |
The clutch cover features an outer diameter of 325 mm, which is significantly larger than light-duty clutch plates, providing the clamping force and torque capacity required for the 4M50 engine's output and the Canter's 3-tonne payload rating.
The pressure plate is manufactured from high-strength steel, providing the rigidity and durability required for commercial vehicle clutch operation. This material resists deformation under high clamping forces and heat generated during repeated clutch engagements.
The cover uses a diaphragm spring that applies uniform clamping force across the clutch disc friction surface. This design provides consistent pedal feel and progressive engagement, reducing the risk of judder or grab during take-off.
The pressure plate incorporates ventilation slots in the central area to enhance airflow and cooling. This design prevents overheating during prolonged clutch engagement - particularly important for trucks operating in hilly terrain or during heavy-load take-offs.
The clutch cover is a direct bolt-on replacement for the factory unit. It matches the original mounting bolt pattern (368 mm P.C.D.) and flywheel interface, requiring no modifications, adapter plates, or custom fabrication.
The cover is interchangeable with multiple OE and aftermarket numbers including MFC590, 30210-Z5068, 30210-Z5105, NDC536, and MFC521. This extensive cross-reference ensures customers find the correct replacement.
The clutch cover is manufactured under IATF 16949 and ISO 9001 certified quality management systems - the automotive industry's highest standard for component production.
Each batch of the Mitsubishi Fuso clutch cover ME512211 undergoes the following verifications:
| QC Item | Verification Method |
|---|---|
| Dimensional accuracy | CMM measurement - 325 mm OD, 210 mm ID, 368 mm PCD verified |
| Diaphragm spring load | Clamping force test - verified against OE specification |
| Surface hardness | Rockwell hardness test - steel grade confirmed |
| Material composition | Spectrographic analysis per batch |
| Dynamic balance | Spin-balanced at operating speed - residual imbalance within OE tolerance |
| Full functional test | Random 2-5% of each batch tested on clutch test rig |
A certificate of conformance (COC) with batch test data is available for wholesale orders.
| Symptom | Diagnosis |
|---|---|
| Clutch slippage under load - RPM rises without speed increase | Worn pressure plate - clamping force reduced |
| High or vague clutch pedal bite point | Diaphragm spring fatigued - replace cover |
| Clutch judder or shudder during take-off | Uneven clamping force or warped cover |
| Heavy clutch pedal requiring excessive effort | Worn release fingers or diaphragm spring |
| Burning smell from clutch area | Excessive heat from slippage - cover and disc overheated |
- This is a clutch cover only - the clutch disc and release bearing are separate components
- The matching clutch disc for this cover is ME517724 (325 mm)
- The matching release bearing is ME538345
- When replacing the clutch cover, always replace the clutch disc and release bearing as a complete set
- Inspect the flywheel for scoring, cracking, or warpage - resurface or replace if damaged
- Use new mounting bolts - torque-to-yield bolts are single-use
- Torque the cover bolts to Mitsubishi factory specification in a star/cross pattern
- Do not allow oil or grease to contact the clutch disc friction surface
- Do not disassemble the pressure plate - it is a sealed, factory-assembled unit
| Component | OE Reference |
|---|---|
| Clutch Disc (325 mm) | ME517724 |
| Release Bearing | ME538345 |
| Clutch Slave Cylinder | ME609070 / ME609072 |
- Individual packaging: Sealed in anti-rust VCI bag, foam-lined carton
- Net weight: Approximately 8-10 kg (325 mm heavy-duty cover)
- Master carton: 10 units per export carton (palletisable)
- Lead time: 3-7 working days for stock orders; 15-25 days for production orders
- Minimum order quantity: 1 piece (sample order available)
- Shipping methods: FedEx, UPS, DHL for sample quantities; sea freight (LCL/FCL) from Shanghai, Ningbo, Guangzhou ports
- H/S Code: 8708.93
The Mitsubishi Fuso Canter clutch cover ME512211 (MFC590) is an OEM-specification replacement with a 325 mm outer diameter, 210 mm inner diameter, and 368 mm P.C.D. for FE72DEV, FE85D, and FE-series Canter trucks with the 4M50 4.9L common rail turbo-diesel engine (2004-2008). The cover is interchangeable with 30210-Z5068, 30210-Z5105, 30210-Z5104, NDC536, and MFC521, and is manufactured by suppliers including EXEDY, VALEO, and LUK.
24V DC Hall-Effect Speed Sensor Direct OEM Replacement for Mitsubishi Hino Truck Odometer Sensor
Speed Sensor S8319-01511 for Mitsubishi/Hino trucks. 24V Hall-effect sensor with 8P/R or 25P/R pulse options. Direct OEM replacement for Hino 700/500 Series and Mitsubishi Fuso trucks. Durable construction ensures accurate speedometer/odometer readings.
24V DC Speed Sensor with Stainless Steel Body and Hall-Effect Technology for Mitsubishi Canter Fuso
Speed Sensor MK421137: Direct OEM replacement for Mitsubishi Canter/Fuso trucks. Features Hall-effect technology, stainless steel construction, waterproof connectors, and 24V compatibility. Ensures accurate speedometer/odometer readings and ECU input signals.
High-Efficiency Filtration Fuel Water Separator OEM Standard for Mitsubishi Fuso Trucks 8DC91 6D22T 6D16T
Fuel Water Separator ME039811 offers high-efficiency contaminant removal & water separation for Mitsubishi Fuso trucks (FV515, FK415, FM515, FM557) with 8DC91, 6D22T, 6D16T engines. Direct OEM replacement with 99.9% filtration accuracy, durable construction, and reliable sealing protects injection systems.
Durable Metal Housing Hand Fuel Pump with Reciprocating Piston Type for OEM Standard Mitsubishi Trucks
Hand Fuel Pump HD-I012/HDI012 is a manual primer pump for Mitsubishi trucks. Features durable metal construction, reciprocating piston design for efficient priming, and direct OEM replacement fit. Ensures reliable engine starting by removing air from fuel systems.
