OEM Specification Tie Rod End Set 45046-39416 & 45047-39256 for Toyota Dyna 200 Heavy-Duty Steering Linkage

The tie rod end set comprising OEM numbers 45046-39416 (RH) and 45047-39256 (LH) is a direct factory-spec replacement for the outer steering linkage on Toyota Dyna 200 series medium-duty trucks. This set includes both right-hand and left-hand outer tie rod ends, which are the critical connection points between the steering linkage and the front wheel knuckles.

These tie rod ends are the outermost components of the steering linkage system. They connect the steering tie rod to the steering knuckle arms on each front wheel. As the driver turns the steering wheel, the tie rod ends transmit that motion to the wheels, converting rotational steering input into precise wheel movement. They also accommodate suspension travel and wheel movement through their ball-and-socket joints.

This Toyota Dyna tie rod end set 45046-39416 & 45047-39256 directly replaces the factory components on the following configurations:

Toyota Dyna 200 Series / ToyoAce (05.2001 - 06.2004)

Earlier fitment period (05.1999 - 05.2001): These part numbers also supersede 45046-39415 and 45047-39255 respectively, which were used on the same chassis codes from 05.1999 to 05.2001.

Engine compatibility: These tie rod ends are used across Dyna 200 models equipped with engines including the 14B, 15B-FTE, and 3B.

• Direct OEM Replacement - These tie rod ends carry the exact Toyota part numbers and are manufactured to the original equipment specifications used in factory steering assembly. They are direct bolt-on replacements for the factory units - no modifications required.
• Precision Steering Response - These tie rod ends are the final link between the steering system and the wheels. Worn units cause play, wander, and poor tracking. Replacing with this OEM-spec set restores accurate steering control, ensuring the vehicle tracks straight and responds precisely when the steering wheel is turned.
• Heavy-Duty Construction - Engineered specifically for commercial vehicles that work under constant load - Dyna trucks frequently operate at or near their gross vehicle weight rating. These tie rod ends are built from premium materials, wear-resistant, and designed to endure the demanding conditions of daily truck operation.
• Comprehensive Supersession Coverage - The 45046-39416 supersedes 45046-39415, and the 45047-39256 supersedes 45047-39255. When a customer searches by any of these numbers - whether in OE parts look-ups or aftermarket catalogues - this set provides the correct components for the specified Dyna 200 applications.
• Prevents Secondary Steering Damage - A worn tie rod end that continues to be used will cause accelerated wear on the steering gear, other linkage components, and tyres. Replacing both sides at the first sign of wear prevents cascading damage to the steering system and avoids a more costly repair.
• Complete Set - RH and LH Included - This listing includes both the right-hand (45046-39416) and left-hand (45047-39256) tie rod ends, ensuring balanced steering response and even tyre wear. Replacing only one side can lead to uneven handling and accelerated wear on the new component.

Each batch of the Toyota Dyna tie rod end set undergoes the following verifications at the OE supplier level:

• Dimensional accuracy - CMM inspection of mounting points, thread profile, and taper geometry
• Ball joint integrity - Load testing and rotational torque verification
• Material composition - Spectrographic analysis of steel grade per batch
• Dust boot integrity - Seal integrity testing to prevent contaminant ingress
• Surface treatment - Corrosion-resistant coating inspection

A certificate of conformance (COC) with batch test data is available for wholesale orders upon request.

• Individual packaging: Each tie rod end sealed in anti-rust VCI bag, foam-lined carton
• Set packaging: Both RH and LH units supplied together in a single carton
• Lead time: 3-7 working days for stock orders; 15-25 days for production orders
• Minimum order quantity: 1 set (sample order available)
• Shipping methods: FedEx, UPS, DHL for sample quantities; sea freight (LCL/FCL) from Shanghai, Ningbo, Guangzhou ports
• H/S Code: 8708.94