Timing Belt Lower Deflection Roller 06B109244 for Audi A3 A4 TT VW Golf Jetta Passat 1.8T 2.0 FSI TFSI — Verified Direct-Fit Idler Pulley
Key Attributes
Product Summary
OEM 06B109244 lower timing belt deflection roller for Audi A3/A4/TT and VW Golf/Jetta/Passat 1.8T 2.0 FSI TFSI. Sealed pre-lubricated bearing, anti-corrosion steel pulley, precision belt groove for stable tracking. Verified direct-fit, 100% inspected, neutral or custom packing.
Product Details
06B109244 Timing Belt Lower Deflection Roller
,Audi Timing Belt Lower Deflection Roller
,A3 Timing Belt Lower Deflection Roller
The Timing Belt Lower Deflection Roller (Guide / Idler Pulley) with OEM number 06B109244 is a verified direct-fit replacement for Audi A3, A4, TT and VW Golf, Jetta, Passat models equipped with the EA113 1.8T 20V / 2.0 FSI / TFSI petrol engine. As a key component of the timing drive system, this lower roller guides the toothed timing belt around the crankshaft and camshaft pulleys, maintaining belt alignment, tracking and correct tension throughout the engine speed range.
- Belt Tracking Stability: Guides the timing belt under OE-specified tension and alignment — verified by bench run under cyclic load test.
- Bearing Durability: Sealed deep-groove ball bearing, pre-lubricated for life — rated for the timing belt replacement interval under normal operating conditions (reference: VAG maintenance schedule).
- Fitment Accuracy: Machined to OE housing bore and pulley diameter for direct bolt-on installation — confirmed against OE cross-reference numbers listed below.
- OEM Cross-Reference Verified: Replaces / matches OE 06B 109 244 across Audi, VW, SEAT and Škoda group applications.
- Squealing, chirping or rattling noise from the timing belt / front engine cover, especially on cold start or at idle.
- Timing belt wander, misalignment or visible side-wear on the belt teeth or flanks.
- Irregular idling, timing deviation or MIL (check engine) light caused by belt slip.
- Seized or rough bearing rotation; belt tracking off the pulley groove.
- Oil or coolant contamination reaching the pulley (check for seal leaks when replacing).
| Part Number | 06B109244 | Product Name | Timing Belt Lower Deflection Roller |
|---|---|---|---|
| Car Model | A3, A4, TT, VW Golf, Jetta, Passat 1.8T / 2.0 FSI / TFSI | Engine Model | A3, A4, TT, VW Golf, Jetta, Passat 1.8T / 2.0 FSI / TFSI |
| Condition | 100% Brand New | Size | Standard |
| Weight | Standard | Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe | Package | Neutral packing or made as requested |
| Material | High-strength aluminum alloy & precision bearings | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Brand | Model | Chassis / Generation | Engine | Engine Codes (Representative) | Years |
|---|---|---|---|---|---|
| Audi | A3 | 8P (8P1 / 8PA) | 2.0 FSI / TFSI | BLR, AXX, CBFA | 2003–2012 |
| Audi | A4 | B6 (8E2 / 8E5) / B7 (8EC / 8ED) | 1.8T 20V / 2.0 TFSI | BFB, BKB, BGB, BPG, BWE, BWT, BUL, BPJ, BYK, ALT | 2000–2008 |
| Audi | TT | 8N3 / 8N9 | 1.8T 20V | AJQ, APP, AUQ, AWP, ATC, AMU | 1998–2006 |
| VW | Golf | IV (1J1) / V (1K1) | 1.8T / 2.0 FSI / TFSI | AWL, AUQ, AXX, BLR, CBFA | 1997–2008 |
| VW | Jetta | IV (1J2) | 1.8T 20V | AWL, AWP, ATC, AMU | 1999–2005 |
| VW | Passat | B5 (3B2 / 3B5) / B5.5 (3B3 / 3B6) | 1.8T 20V / 2.0 | AWT, AWM, ALT | 1996–2005 |
- This part is the lower guide / deflection roller; the tensioner pulley corresponds to OE 06B109243 series — do not interchange.
- Fitment must be confirmed by engine code and VIN; some engines share the same model name but use different timing drive layouts.
- Verify pulley diameter, width and bore against the removed original part before installation.
| Feature | Benefit & Verification Signal |
|---|---|
| OE-matched pulley diameter and housing bore | Direct bolt-on fitment, no modification — verified by dimensional inspection against OE sample. |
| Sealed, pre-lubricated deep-groove ball bearing | Smooth rotation, low noise, extended service life — verified by bearing rotation and noise bench test. |
| Anti-corrosion coated steel pulley | Resists rust and surface wear under under-hood heat and moisture — verified by salt-spray / coating thickness check. |
| Precision-machined belt groove | Correct belt tracking, reduced flank wear and belt slip — verified by profile gauge measurement. |
| Full cross-reference matching | One part number covers the listed Audi / VW / SEAT / Škoda applications — verified against OE and brand cross-reference list. |
| QC Item | Verification Method |
|---|---|
| Dimensional check (bore, OD, width) | Caliper / micrometer / CMM against OE drawing |
| Bearing rotation & axial / radial play | Manual rotation test + dial indicator measurement |
| Noise & smoothness test | Bench spin test under load, auditory vibration check |
| Surface coating / corrosion | Coating thickness gauge; salt-spray test where required |
| Belt groove profile | Profile gauge / optical comparator |
| 100% final inspection | Visual + functional check before packaging |
Timing drive work affects valve timing. Have the job performed by a trained technician following the official VAG workshop manual; set the engine to TDC on No.1 cylinder before removing the timing belt.
- Align crankshaft and camshaft timing marks; confirm No.1 piston at TDC.
- Remove the old timing belt and inspect the tensioner (06B109243 series), water pump and idlers for wear.
- Install the lower guide roller (06B109244); tighten the mounting bolt to the OE-specified torque value per the workshop manual.
- Refit and tension the timing belt per the specified procedure; re-check timing marks after rotating the engine two full crankshaft turns.
- Replace the timing belt, tensioner and rollers as a matched set at the scheduled interval.
- Inspect the timing belt, rollers and tensioner at the manufacturer-scheduled service interval; replace per the VAG maintenance schedule (typically every 90,000–120,000 km / 60,000–75,000 miles, or as specified for the engine).
- Always replace rollers together with the timing belt and tensioner; do not reinstall a used roller.