Genuine VW Audi Alternator Overrunning Decoupler Pulley 022903119D for 3.2L V6 FSI Engine — Verified OE OAP Pulley
Key Attributes
Product Summary
Genuine 022903119D OAP pulley for VW Audi 3.2L V6 FSI. High-carbon steel sprag clutch, -40℃~150℃ rated, 120,000-cycle tested, 98.3% fit rate. 12-month warranty. Direct OE replacement.
Product Details
VW Audi alternator decoupler pulley
,022903119D OAP pulley 3.2L V6
,OE verified alternator overrunning pulley
Genuine-spec Alternator Overrunning Decoupler Pulley 022903119D — a verified direct replacement for Volkswagen and Audi vehicles equipped with the 3.2L V6 FSI petrol engine. Manufactured to OE standard as an OAP (Overrunning Alternator Pulley).
This alternator overrunning decoupler pulley (OAP) with OEM number 022903119D is a genuine-spec direct-fit replacement for Volkswagen and Audi vehicles equipped with 3.2L V6 FSI petrol engines. It installs on the alternator shaft and acts as a one-way decoupler to isolate alternator inertia from the serpentine drive belt.
The internal sprag clutch allows the alternator to freewheel when engine speed drops. It absorbs sudden torque spikes, dampens belt oscillation, and protects the belt, tensioner, idler pulleys and crankshaft damper from cyclic shock loads and premature wear.
- Internal clutch seizes or slips, losing decoupling freewheel function
- Rattling, chirping or squealing noise at idle and throttle release
- Excessive serpentine belt vibration, fraying and rapid cracking
- Accelerated failure of belt tensioner, idler pulley and harmonic balancer
- Belt mis-tracking, increased risk of belt throw or snap
- Clutch durability bench test: 120,000 one-way lock-freewheel cycles without slip failure — verified on dedicated OAP test rig
- Wide temperature endurance: −40℃ to +150℃ cyclic thermal ageing; clutch locking torque remains stable — internal QC lab record
- Installation success rate: 98.3% bolt-on fitment, confirmed across 179 V6 FSI repair orders
- OE cross-reference verified: Replaces original OE 022903119D
| Part Number | 022903119D |
| Product Name | Genuine VW Audi Alternator Overrunning Decoupler Pulley |
| Car Model | 3.2L V6 FSI Engine |
| Engine Model | 3.2L V6 FSI Engine |
| Condition | 100% Brand New |
| Material | High-strength aluminum alloy & precision bearings |
| Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement |
| Quality Standard | OEM equivalent / ISO quality control |
| Weight | Standard |
| Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Package | Neutral Packing Or Make It As Requested |
| Warranty | 6 Months |
| Price & Stock | Please Contact Us To Get More Information |
| Feature | Benefit + Verification Signal |
|---|---|
| Precision sprag one-way decoupler clutch | Smooth freewheel during deceleration, cuts shock loads to serpentine drive parts — verified by 120,000-cycle clutch durability bench test |
| High-temperature anti-oxidation complex grease | Stable locking torque under sustained high under-hood heat — verified by −40℃ to +150℃ thermal cycling test |
| Dual rubber dust & splash sealing lips | Blocks dust, moisture and road salt ingress to extend clutch working life — verified by ISO 9227 200h neutral salt spray test |
| OE-matched outer diameter, groove profile and thread dimensions | Direct bolt-on fit without modification, matches original belt and tensioner geometry — verified by 98.3% field installation success rate |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
- HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogues. This product is primarily adapted for ISUZU FSR 6HE1; the above numbers are listed for customer cross-comparison.
- If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. "Short" and "long" pushrod variants exist within the MC828264 family.
- Always provide the VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
| QC Item | Verification Method |
|---|---|
| One-way clutch lock and freewheel function | Dedicated OAP functional test bench |
| Dimension & groove profile tolerance | CMM coordinate measuring machine, compared to OE drawing |
| Static clutch torque retention test | Hydraulic torque tester |
| High-low temperature ageing cycle test | Programmable thermal chamber |
| Housing corrosion resistance | ISO 9227 neutral salt spray test |
- Disconnect the vehicle battery negative terminal
- Release serpentine belt tension and remove drive belt
- Secure alternator rotor shaft with holding fixture
- Remove old decoupler pulley with dedicated OAP socket
- Thoroughly clean threads on alternator shaft
- Fit new OAP pulley, tighten lock nut to 75–85 N·m
- Refit accessory belt, check belt alignment and tension
- Start engine and inspect for abnormal rattle or squeal
Inspect decoupler function and pulley groove wear every 30,000 km. Replace immediately if slip, seizure or abnormal noise appears.
- Neutral export carton; each pulley wrapped with foam protection + PE anti-scratch bag
- Suitable for VW Audi specialist garages, fleet service, spare parts wholesalers and online auto parts retailers