ISUZU Clutch Release Bearing Hub 1-31321052-YM 1313210520 for FVR FTR FSR FVZ 6HK1 — OEM Standard Cast Iron Block Direct Fit Verified
Key Attributes
Product Summary
OEM-standard ISUZU clutch release bearing hub (1-31321052-YM) for FVR/FTR/FSR/FVZ 6HK1 trucks. High-strength cast iron/alloy steel with anti-corrosion coating ensures durability and smooth sliding under heavy loads. Direct-fit, 100% tested, 6-month warranty, and cross-referenced to multiple OEM numbers for easy replacement.
Product Details
ISUZU clutch release bearing hub
,1-31321052-YM 1313210520 cast iron hub
,FVR FTR FSR FVZ 6HK1 direct fit hub
The Clutch Release Bearing Hub (also known as the Clutch Shift Block) with OEM number 1-31321052-YM / 1313210520 is a verified direct-fit replacement for ISUZU FVR, FTR, FSR, FVZ, and LT series commercial trucks equipped with the 6HK1 diesel engine.
This bearing hub features a double-ear sliding block structure and is mounted on the transmission input shaft sleeve, where it serves as the core guiding and force-transmitting component of the clutch control mechanism. When the clutch pedal is depressed, the release fork pushes the hub to slide axially, which in turn pushes the release bearing against the pressure plate diaphragm spring to disengage the clutch. When the pedal is released, the fork springs (1-09585053 / 1-09585054) pull it back to the rest position.
Manufactured from high-strength cast iron / alloy steel with precision casting and anti-rust surface treatment, it delivers excellent compressive strength and wear resistance, ensuring smooth sliding without binding under frequent shifting and heavy-load conditions.
- Material: High-strength cast iron / alloy steel (steel block)
- Inner diameter (sliding bore) reference: 55 mm (per same-series 1-31321052-1 specification)
- Surface treatment: Anti-corrosion coated
- Condition: 100% new
- Durability: Supplier offers a 6-month warranty; small batch trial orders accepted
- Fitment: Standard mounting dimensions with direct replacement design — snaps onto the transmission input shaft sleeve and engages the release fork in the original position
Replaces ISUZU OEM numbers 1-31321052-YM / 1313210520 / 1-31321052-0 / 1-31321052-2 / 1-31321030-0 / 1313210522 / 1313210300. Same-series variants include 1-31321052-1 / 1-31321052-3 / 1-31321052-J.
When the clutch release bearing hub exhibits any of the following conditions, timely inspection and replacement are required:
- Spongy clutch pedal or incomplete disengagement: A worn bore or transmission sleeve causes loss of axial thrust transmission, preventing the clutch from fully cutting power and making gear engagement difficult.
- Gear grinding or abnormal noise during shifting: Hub binding or worn misalignment causes poor contact between the release bearing and pressure plate diaphragm spring, producing metal friction noise during operation.
- Judder during start-up or non-linear clutch engagement: Worn or deformed double-ear bosses prevent the fork from pushing the hub smoothly, causing jerking during clutch engagement.
- Release bearing burnout: Uneven wear on the hub face causes uneven load on the release bearing, leading to localized overheating and burnout.
- Abnormal pedal free play: Severe wear on the sliding surface increases return resistance, causing poor pedal return.
| Part Number | 1-31321052-YM / 1313210520 | Product Name | Clutch Release Bearing Hub |
|---|---|---|---|
| Car Model | FVR, FTR, FSR, FVZ | Engine Model | 6HK1 |
| Condition | 100% Brand New | Size | Standard |
| Weight | Standard | Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe | Package | Neutral packing or made as requested |
| Material | High-strength aluminum alloy & precision bearings | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Brand | Model | Series | Engine | Note |
|---|---|---|---|---|
| ISUZU | FVR | FORWARD / F-Series | 6HK1 | Release bearing hub / shift block |
| ISUZU | FTR | FORWARD / F-Series | 6HK1 | Release bearing hub / shift block |
| ISUZU | FSR | FORWARD / F-Series | 6HK1 | Release bearing hub / shift block |
| ISUZU | FVZ34 | F-Series Heavy Truck | 6HK1 | Release bearing hub / shift block |
| ISUZU | LT Series | LT Series | 6HK1 | Series reference |
Data source: Vehicle compatibility per Accio (FVR/FTR/FSR/FVZ 6HK1) and Spanish Autopart-Masters (FVR LT) product pages.
Important Notes:
YM Suffix: Part number 1-31321052-YM is an aftermarket replacement version (typically "YM" denotes the aftermarket brand or supplier code) and is fully interchangeable with OEM numbers 1-31321052-0 / -2, etc.
Clutch Assembly Configuration: Variations may exist across different chassis drive configurations and transmission models. Verify the original clutch housing type or VIN before ordering.
Pre-Installation Verification: Please provide the VIN or original bearing hub number for precise fitment confirmation.
| Feature | Benefit & Verification Signal |
|---|---|
| High-Strength Cast Iron / Alloy Steel Construction | Precision-cast from high-grade cast iron or alloy steel, offering excellent compressive strength and wear resistance without deformation or binding under heavy-load and frequent release conditions. |
| Precision-Formed Double-Ear Bosses | Bilateral fork-action bosses machined to original angles and dimensions, ensuring even thrust transmission and preventing uneven wear and binding. |
| Precision Bore Sliding Fit | Precision-machined bore provides accurate sliding clearance with the transmission input shaft sleeve, ensuring smooth axial movement without play. |
| Direct Replacement Installation | Snaps onto the shaft sleeve and engages the fork in the original mounting position — no machining or modification required, for fast and efficient repair. |
| 6-Month Warranty | Provides reliable after-sales protection, reducing replacement risks for repair shops and fleets. |
| QC Item | Verification Method |
|---|---|
| Bore Dimension & Roundness Inspection | Inside micrometer / CMM — verifies sliding bore diameter (reference 55 mm) and roundness meet OEM tolerances. |
| Material Hardness & Metallographic Inspection | Hardness tester / metallurgical microscope — verifies cast iron/steel hardness and structural uniformity. |
| Double-Ear Boss Position Inspection | Gauge / CMM — ensures fork-action boss angles and heights are consistent. |
| Sliding Fatigue Test | Reciprocating sliding test — simulates high-frequency axial movement to ensure no binding or abnormal wear. |
| Appearance & Packaging Inspection | 100% visual inspection — no blowholes, cracks, or burrs; packaging meets anti-rust transport requirements. |
Certification: Supplier declares factory inspection. Request bore dimension inspection and material reports before bulk procurement.
Important: The release bearing hub is located inside the clutch housing between the transmission and engine. Installation involves transmission removal or clutch lower housing disassembly. Professional installation by a qualified technician using a lift is recommended. Ensure the vehicle is securely supported. When replacing the bearing hub, the release fork, fork springs, and release bearing must be inspected simultaneously; replace if wear is found.
- Disconnect power and support: Disconnect the negative battery terminal and safely support the vehicle using a lift.
- Remove transmission: Remove the propeller shaft and transmission mounting bolts, then slide the transmission rearward to expose the clutch mechanism.
- Remove old bearing hub: Detach the fork springs, disengage the fork, and slide the old bearing hub off the transmission input shaft sleeve.
- Clean and inspect: Thoroughly clean old grease and oil from the input shaft sleeve surface and check for wear grooves. If the sleeve is severely worn, replace it.
- Install new bearing hub: Apply appropriate high-temperature grease to the input shaft sleeve surface, slide the new bearing hub on, and ensure the double-ear bosses face the correct direction for the fork.
- Install fork and springs: Engage the release fork onto the hub bosses and hook the two fork springs (LH 1-09585054 / RH 1-09585053).
- Function test: Manually push the fork to confirm smooth hub sliding without binding and reliable spring return.
- Reassemble and road test: Reinstall the transmission, propeller shaft, and other components. Start the engine and perform a gear-shifting road test to confirm complete clutch disengagement, smooth engagement, and absence of abnormal noise.
- Every time the clutch system undergoes a major overhaul or clutch disc/release bearing replacement, replacing the release bearing hub is recommended to prevent old hub wear from causing new bearing misalignment.
- Regularly check clutch pedal free play and shift feel. If binding or incomplete disengagement is detected, inspect the bearing hub sliding condition promptly.