ISUZU Clutch Release Fork Spring (RH) 1-09585053-1 1095850531 for FVR FSR FTR 6HK1 — OEM Standard High-Strength Spring Steel Verified Fit
Key Attributes
Product Summary
OEM-standard ISUZU RH clutch release fork spring (1-09585053-1) in high-strength, heat-treated spring steel with anti-corrosion coating. Verified direct fit for FVR, FTR, FSR, NQR, NPR, NKR and ELF trucks with 6HK1, 6HH1 and 6BD1 engines. Restores reliable fork return and clutch free play; 100% new, 6-month warranty, cross-referenced to multiple OEM numbers.
Product Details
ISUZU Clutch Release Fork Spring
,RH Clutch Fork Spring 6HK1
,OEM 1-09585053-1 Clutch Spring
The Clutch Release Fork Spring with OEM numbers 1-09585053-1 / 1095850531 (English part name: Spring; Shift Fork / Clutch Release Fork Spring) is a verified direct-fit replacement for ISUZU FVR, FTR and FSR series trucks, as well as NQR, NPR, NKR and ELF models equipped with 6HK1, 6HH1 and 6BD1 diesel engines.
This spring is installed inside the clutch housing on the right side. It pulls the clutch release bearing carrier and fork back to the disengaged position when the clutch pedal is released, maintaining the correct clearance (free play) between the release bearing and the pressure plate diaphragm spring. This prevents the bearing from spinning continuously against the pressure plate, which can otherwise lead to premature burnout or abnormal wear. Manufactured from high-strength heat-treated spring steel with a corrosion-resistant finish, it withstands the alternating torsional stresses of frequent clutch operation.
- Material: High-strength spring steel
- Condition: 100% new
- Surface: Corrosion-resistant coating
- HS Code reference: 73209010 (Iron or steel springs and leaves for springs)
- Durability: Aftermarket suppliers offer a 6-month warranty; OE-quality construction ensures consistent tension and reliable fatigue life
- Fitment: Standard mounting dimensions; direct replacement design snaps into the fork and bearing carrier in the original position
- OEM Cross-Reference: Replaces / relates to ISUZU OEM numbers 1-09585053-0 / 1095850530 / 1-09585-053-0 / 109585-0530 / 1-09585-0531 / 109585-0531. The left-side counterpart spring is typically 1-09585054-0.
When the clutch release fork spring exhibits any of the following conditions, timely inspection and replacement are required:
- Poor clutch pedal return: After releasing the pedal, it returns slowly or fails to return completely, leaving the vehicle in a partial clutch engagement state.
- Release bearing noise or premature wear: Insufficient spring tension or breakage prevents the release bearing from retracting from the pressure plate. The bearing continues to spin at high speed during driving, producing a grinding noise and excessive heat.
- Reduced or lost clutch free play: The fork lacks spring return tension and remains tilted under load, causing the release bearing to lightly contact the pressure plate.
- Abnormal noise from the transmission front: Broken spring fragments falling into the clutch housing can cause metal friction or impact noise during operation.
- Judder during start-up or rough shifting: The release mechanism does not return fully, causing non-linear engagement and vehicle judder during take-off.
| Part Number | 1-09585053-1 / 1095850531 |
| Product Name | Clutch Release Fork Spring (RH) |
| Car Model | FVR / FSR / FTR |
| Engine Model | 6HK1 |
| Condition | 100% Brand New |
| Size | Standard |
| Weight | Standard |
| Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Package | Neutral packing or made as requested |
| Material | High-strength spring steel |
| Installation | Direct OEM replacement |
| Quality Standard | OEM equivalent / ISO quality control |
| Brand | Model | Series | Engine | Note |
|---|---|---|---|---|
| ISUZU | FVR34 | FORWARD / F-Series | 6HK1 / 6HK1T | Fork spring (RH) |
| ISUZU | FVR6HE1 | F-Series Heavy Truck | 6HE1 | Fork spring (RH) |
| ISUZU | FTR | FORWARD / F-Series | 6HK1 / 6HH1 | Fork spring (RH) |
| ISUZU | FSR113 | FORWARD / F-Series | 6BD1 / 6HK1 | Fork spring (RH) |
| ISUZU | NQR / NPR | N-Series | 4HK1 / 4HF1 | Series reference (depending on clutch config) |
| ISUZU | NKR / ELF / VC46 | N-Series / ELF Series | 4JJ1 / 4HK1 | Series reference (depending on clutch config) |
| ISUZU | CYZ / CXZ / EXZ | GIGA Series | 6WF1 / 10PE1 | Series reference (depending on clutch config) |
Data source: Vehicle compatibility per Qicheng (FSR113), Russian Isuzu Autospareparts (FVR6HE1), and Japanese Ecer (FVR34 / FTR / FSR / NQR / NPR / NKR / ELF / CYZ / CXZ / EXZ) product pages.
LH/RH distinction: This product is the Right-Hand (RH) release fork spring (Part No. 1-09585053-1). The Left-Hand (LH) counterpart is 1-09585054-0. Confirm the required position before ordering.
Clutch assembly configuration: This spring fits hydraulic or mechanical cable-operated clutch release mechanisms. Variations may exist across different chassis drive configurations and cab styles. Verify the original clutch housing type before ordering.
Pre-installation verification: Please provide the VIN or original spring number for precise fitment confirmation.
| Feature | Benefit & Verification Signal |
|---|---|
| OE Specification Match | Manufactured to ISUZU original design wire diameter, coil count and lever arm angle, ensuring exact installation clearance and restoring force. |
| High-Strength Spring Steel Material | Premium alloy spring steel with quenching and tempering treatment maintains stable fatigue resistance in the high-temperature, high-vibration clutch environment. |
| Anti-Corrosion Surface Treatment | Phosphating or special anti-corrosion coating resists dust and moisture inside the clutch housing, preventing spring rust and fracture. |
| Direct Replacement Installation | Snap-in mounting structure; no special tooling or modification required. Direct replacement when servicing the clutch fork — fast and efficient. |
| 6-Month Warranty | Provides reliable after-sales protection, reducing replacement risks for repair shops and fleets. |
| QC Item | Verification Method |
|---|---|
| Tension and Torque Test | Spring tension gauge — verifies return torque under specified deflection meets original technical specifications. |
| Fatigue Life Test | High-frequency fatigue testing machine — simulates hundreds of thousands of compression-return cycles to ensure no plastic deformation or fracture. |
| Hardness Test | Rockwell / Vickers hardness tester — verifies spring steel hardness and heat treatment indicators meet design standards. |
| Material Composition Analysis | Spectrometer analysis — verifies spring steel grade and carbon content. |
| Appearance & Packaging Inspection | 100% visual inspection — no burrs, creases or surface rust; packaging meets moisture-proof transport requirements. |
Certification: Supplier declares factory inspection. Request fatigue life testing and hardness inspection records before bulk procurement.
The release fork spring is located inside the clutch housing between the transmission and engine. Installation involves transmission removal or clutch lower housing disassembly. Professional installation by a qualified technician using a lift is recommended. Ensure the vehicle is securely supported. When replacing the spring, if the release bearing or fork bushings are worn, they should be replaced simultaneously.
- Disconnect power and support: Disconnect the negative battery terminal and safely support the vehicle using a jack or lift.
- Remove propeller shaft and transmission (if necessary): Remove the propeller shaft and transmission mounting bolts, then slide the transmission rearward to expose the clutch release fork mechanism.
- Remove old spring: Use a pry bar or needle-nose pliers to detach the old spring from the fork pivot and bearing carrier hook. Be careful to prevent the spring from popping out and getting lost.
- Inspect related components: Check the release bearing for smooth rotation and the fork for cracks or severe wear. If the bearing is seized, replace it simultaneously.
- Install new spring: Hook one end of the new spring into the fixed hole / pivot in the clutch housing and the other end into the bearing carrier hook. Confirm the spring is seated correctly without twisting.
- Reset and test: Manually move the fork to confirm the spring reliably pulls the bearing carrier back to the disengaged position. Depress and release the clutch pedal, observing smooth fork travel and return.
- Reassemble and road test: Reinstall the transmission, propeller shaft and other components. Start the engine and perform a gear-shifting road test to confirm complete clutch disengagement, smooth engagement and absence of abnormal noise.
- Every time the clutch system undergoes a major overhaul or clutch disc replacement, it is recommended to replace the release fork spring simultaneously to prevent old spring fatigue from damaging the new bearing.
- Regularly check clutch pedal free play. If the pedal becomes soft or returns slowly, inspect the spring condition promptly.