Rear Brake Drum MK328387 / MK-328387 For MITSUBISHI Fuso Canter FE7 FE8 (FE639, FE83P, FE84P) — 320×120 Mm, HT250 / G3000 Grey Cast Iron, 6-Bolt, OEM-Spec
Key Attributes
Product Summary
OEM-spec MK328387 rear brake drum for Mitsubishi Fuso Canter FE7/FE8. HT250/G3000 grey iron ensures heat dissipation and fade resistance. 320×120mm, 6-bolt, ISO9001/TS16949 certified, 1-year warranty, custom packing available.
Product Details
Rear Brake Drum Mitsubishi Fuso Canter
,320×120 mm 6-Bolt Brake Drum
,HT250 G3000 Cast Iron Brake Drum
The Rear Brake Drum with OEM reference MK328387 / MK-328387 (and the closely related interchange references MK321338 and MC894848) is a verified replacement drum brake component for MITSUBISHI Fuso Canter FE7 and FE8 series light-to-medium duty trucks, covering a broad range of chassis codes including FE639, FE83P, FE84P, FE71, FE73, and FE84. This is the rear axle brake drum — the rotating cylindrical component that the brake shoes press against to generate friction and decelerate the vehicle. It is a critical wear item in the drum brake system, and its dimensional accuracy, material integrity, and dynamic balance directly determine braking performance, pedal feel, and wheel bearing life.
The drum is manufactured from HT250 / G3000 high-carbon grey cast iron, a material grade selected for its excellent thermal conductivity, heat-sink capacity, and resistance to thermal fatigue and surface cracking. This metallurgy is specifically engineered to prevent brake fade and drum warping during the frequent stop-and-go delivery cycles typical of Canter commercial operations. The confirmed dimensional set is 320 mm brake surface diameter × 120 mm friction width × 158 mm total height, with a 114 mm pilot/centering diameter, 150 mm PCD, 6 bolt holes, and 22 mm bolt hole diameter. The reference net weight is approximately 16.5 kg.
- 320 × 120 mm Brake Surface Configuration
The 320 mm diameter and 120 mm friction width are the defining dimensional specifications. A drum with a different diameter or width will not match the brake shoe arc, leading to uneven contact, reduced braking force, and accelerated wear. Confirm the original drum's dimensions or the vehicle's brake specification before ordering. - Canter FE7 / FE8 Platform Coverage (FE639, FE84P, and Related)
The drum is confirmed for Fuso Canter FE7 series (FE71, FE73, FE84) and FE8 series, with specific chassis coverage including FE639, FE83P, and FE84P. Confirm the exact chassis code and VIN before ordering, as brake configurations can vary across production years and market-specific variants. - Cross-Reference Awareness (MK328387 vs. MK321338 / MC894848)
The primary reference MK328387 is grouped with MK321338 and MC894848 in the aftermarket. While these references are frequently treated as interchangeable for the Canter application, height and offset differences may exist between variants. The MK328387 is the 158 mm height specification; verify the required height/offset against the original drum before substituting a related reference.
- ✓Dimensional Set Verified: 320 mm brake surface diameter, 120 mm friction width, 158 mm total height, 114 mm pilot/centering diameter, 150 mm PCD, 6 holes, 22 mm bolt hole diameter
- ✓Material Verified: HT250 / G3000 high-carbon grey cast iron
- ✓Weight Verified: Approx. 16.5 kg
- ✓Vehicle Coverage Verified: Fuso Canter FE7 series (FE71, FE73, FE84), FE8 series; specific chassis FE639, FE83P, FE84P
- ✓Cross-Reference Density Verified: MK328387, MK-328387, MK321338, MC894848 are consistently grouped as interchangeable/related references. MK328387MX is also referenced as a supersession/variant.
- ✓Brand & Certification Reference: IZUMI, HOHENUFER, HCKSFS aftermarket brands are referenced. ISO9001 / TS16949 certification is confirmed for the ecer-listed supply.
- ✓Warranty & Supply Reference: 1-year warranty; MOQ 10 pcs (ecer reference); supply capacity 1,000 pcs/month; delivery 10 days — confirmed by ecer supplier data.
- Squealing, grinding, or scraping noise during braking: Worn brake shoes contacting the drum rivets or backing plate, or a scored drum surface, produces metallic grinding that changes with wheel speed.
- Pulsating brake pedal or steering wheel vibration: An out-of-round, warped, or dynamically unbalanced drum causes pedal pulsation and chassis vibration during braking.
- Longer stopping distances / brake fade: A drum that has exceeded its maximum inside diameter or developed heat cracks cannot dissipate heat effectively, leading to fade under repeated braking.
- Visible cracks, heat discoloration (blue spots), or deep scoring on the friction surface: Direct inspection reveals thermal damage or mechanical scoring that requires replacement.
- Brake drag / overheating wheel: A drum that is out-of-round or has excessive runout can cause the shoes to drag, generating excessive heat and accelerating wear on both the drum and shoes.
- Wheel bearing noise or premature seal failure: An unbalanced or out-of-round drum transmits vibration to the wheel bearings and seals, accelerating their wear.
| Part Number | MK328387 / MK-328387 | Product Name | Rear Brake Drum |
|---|---|---|---|
| Car Model | MITSUBISHI Fuso Canter FE7 FE8 (FE639, FE83P, FE84P) | Engine Model | MITSUBISHI Fuso |
| Condition | 100% Brand New | Size | Standard |
| Weight | Standard (approx. 16.5 kg) | Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe | Package | Neutral Packing Or Make It As Requested |
| Material | HT250 / G3000 high-carbon grey cast iron | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Brand | Model / Series | Chassis / Variant | Notes |
|---|---|---|---|
| MITSUBISHI Fuso | Canter FE7 Series | FE71, FE73, FE84 | Core application |
| MITSUBISHI Fuso | Canter FE8 Series | — | — |
| MITSUBISHI Fuso | Canter | FE639 | Confirmed by IndiaMart application data |
| MITSUBISHI Fuso | Canter | FE83P, FE84P | Confirmed by IndiaMart application data |
| MITSUBISHI Fuso | Canter | FE84, FE85 | Confirmed by Greek-market ecer listing |
- 320 × 120 mm is the defining specification: This drum has a 320 mm brake surface diameter and 120 mm friction width. Confirm the original drum's dimensions before ordering — a mismatched drum will not match the brake shoe arc and will cause uneven braking.
- Canter FE platform is the core application: The drum is confirmed for FE7 and FE8 series with specific chassis coverage including FE639, FE83P, and FE84P. Provide the VIN or chassis code for final confirmation in mixed-fleet or transitional-year applications.
- Cross-reference caution (MK321338 / MC894848): While grouped as interchangeable, MK321338 may have a different height or offset. The MK328387 is the 158 mm height specification. Verify the required height against the original drum before substituting a related reference.
- Ignore L200 application data: The L200 pickup does not share the Canter's 320×120 mm drum brake architecture.
| Feature | Benefit + Verification Signal |
|---|---|
| 320 × 120 mm precision dimensions | Matches the Canter FE7/FE8 rear brake shoe arc for even contact, consistent braking torque, and correct pedal feel |
| HT250 / G3000 grey cast iron | Provides high thermal conductivity and heat-sink capacity, rapidly dissipating heat to prevent brake fade and drum warping during frequent stop-and-go delivery cycles |
| CNC-machined to OEM tolerances | Ensures immediate friction alignment with new brake shoes, reducing bedding-in time and eliminating vibration from day one |
| Factory dynamic balancing | Eliminates high-speed vibration, protecting wheel bearings and seals from premature wear |
| 6-bolt, PCD 150 mm, 22 mm holes | Direct-fit mounting interface for the Canter rear hub — verified across multiple supplier dimensional data |
| 1-year warranty and 1,000 pcs/month capacity | Provides an after-sales baseline and reliable replenishment for distributors serving Canter fleets — confirmed by ecer supplier terms |
| Wooden pallet packaging | Protects the heavy (16.5 kg) cast iron drum during sea freight and warehouse handling — confirmed by ecer packaging specification |
| QC Item | Verification Method |
|---|---|
| Brake surface diameter | Precision caliper / bore gauge — verify 320 mm |
| Friction width | Caliper verification — 120 mm |
| Total height | Caliper verification — 158 mm |
| PCD and bolt hole diameter | Verify 150 mm PCD, 6 holes, 22 mm diameter against the hub |
| Centering diameter | Verify 114 mm pilot diameter against the hub spigot |
| Material hardness / chemistry | Supplier material certificate — HT250 / G3000 specification |
| Dynamic balance | Factory balance verification — supplier QC documentation |
| Surface condition | Visual inspection for cracks, heat checks, or deep scoring |
- Confirm the required drum first: Verify the replacement drum's 320 × 120 mm dimensions, 158 mm height, and 6×150 mm PCD match the original unit. Confirm whether the original brake shoes are reusable or must also be replaced.
- Safety first: Park on level ground, engage the parking brake, and chock the front wheels. Loosen the rear wheel lug nuts before raising the vehicle. Support the rear axle securely on jack stands.
- Remove the wheel and drum: Remove the wheel. Back off the brake shoe adjuster (if equipped) to release drum tension. Slide the drum off the hub. If the drum is seized, use a soft-faced mallet or drum puller — do not pry against the friction surface.
- Inspect the brake shoes and hardware: Check the shoes for lining thickness, cracks, or oil contamination. Inspect the springs, adjuster, and wheel cylinder for leaks or wear. Replace any worn components before installing the new drum.
- Clean the hub mating surface: Remove rust, scale, and debris from the hub pilot and mounting face. A clean, flat surface is essential for correct drum seating and runout.
- Install the new drum: Slide the MK328387 drum onto the hub, aligning the bolt holes. Do not force — if the drum does not seat fully, check the parking brake adjustment and shoe position.
- Adjust the brake shoes: Adjust the shoes to the specified drum-to-lining clearance (refer to the workshop manual). An over-tight adjustment will cause drag and overheating.
- Reinstall the wheel and torque: Reinstall the wheel and torque the lug nuts to specification in a star pattern.
- Road test: Drive at low speed and apply the brakes gently several times to seat the shoes. Check for pulsation, noise, or drag. Re-adjust if necessary.
- Inspect the brake drums and shoes at every major service or every 20,000–30,000 km — measure the drum inside diameter and check for cracks or scoring.
- Replace the drum when the inside diameter exceeds the maximum specification stamped on the drum, or if cracks, deep scoring, or heat discoloration are present.
- Replace brake shoes in axle pairs — mixing new and worn shoes can cause uneven braking.
- Do not machine (turn) a drum beyond the manufacturer's maximum diameter — an over-thinned drum cannot dissipate heat effectively and is prone to warping and cracking.
- Standard packing: Wooden pallet with plastic band (ecer reference); neutral / customer-branded packaging available.
- Package contents: 1 × Rear Brake Drum. Brake shoes, springs, adjuster hardware, and wheel bearings are not included unless explicitly stated — confirm at inquiry.
- Set options: Drum only (standard) / drum + brake shoe kit (where available) — specify at inquiry.
- Minimum order: 10 pcs (supplier reference); sample orders may be negotiable for first-time verification.
- Supply capacity: 1,000 pcs/month (reference).
- Delivery time: 10 days (reference); confirm current stock and lead time.
- Suitable for: MITSUBISHI Fuso Canter brake system repair shops, light-to-medium duty commercial truck fleet maintenance departments, brake and wheel-end specialists, spare parts distributors, and export wholesalers serving Asia, Australia, Europe, and the Middle East.