Center Support Bearing 37235-1120 for Hino KR-FF FC Profia — Verified 50mm OEM
Key Attributes
Product Summary
Verified 50mm center support bearing for Hino KR-FF, FC, Profia. Steel body with NR rubber cushion absorbs vibration and restores driveshaft alignment. ISO9001 certified, direct OEM replacement for 37235-1120. Cross-references COB1120, MD-1009, N2315000. Neutral packing available.
Product Details
Center Support Bearing 37235-1120
,50mm OEM Center Bearing Hino
,Hino Profia Center Support Bearing
Driveshaft Center Support Bearing 37235-1120 for Hino KR-FF, FC series, and Profia trucks — a verified direct-fit replacement engineered with a 50 mm bore, steel body, and NR (Natural Rubber) cushion, manufactured under ISO9001 quality control.
This center support bearing is a critical component of the driveshaft support system. It mounts the propeller shaft sections in the correct position, isolates driveline noise and vibration, and relieves stress on universal joints and transmission components.
- ✓Bearing Specification: 50 mm inner diameter — confirmed by multiple independent supplier datasheets.
- ✓Reference Weight: Approx. 2.5 kg — per supplier specification sheet.
- ✓Material & Certification: Steel body with NR (Natural Rubber) cushion, ISO9001 certified.
- ✓Cross-Reference: Replaces COB1120, MD-1009, N2315000, HYCB-001.
- ⚠Installation Success Rate: To be supplied by YIMI.
Replace the center support bearing if any of the following symptoms are observed:
- Driveshaft vibration at highway speeds
- Clunking or knocking noise during acceleration or deceleration
- Visible play or wobble in the center bearing
- Rubber cushion cracking or separation from the steel bracket
- Premature universal joint wear
| Part Number | 37235-1120 | Product Name | Center Support Bearing |
|---|---|---|---|
| Car Model | Hino KR-FF FC Profia | Engine Model | Hino KR-FF FC Profia |
| Condition | 100% Brand New | Size | 50 mm bore |
| Weight | Standard (approx. 2.5 kg) | Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe | ||
| Package | Neutral packing or as requested | Warranty | 6 Months |
| Price & Stock | Please contact us for more information | ||
| Material | High-strength aluminum alloy & precision bearings | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
- •HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily oriented toward ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
- •If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. "Short" and "long" pushrod variants exist within the MC828264 family.
- •Always provide the VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
| Feature | Benefit & Verification Signal |
|---|---|
| 50 mm bearing bore | Matches OE propeller shaft journal diameter for precise fit — confirmed by multiple supplier datasheets. |
| Steel + NR rubber construction | Absorbs driveline vibration and reduces cabin noise — material confirmed by ISO9001 supplier data. |
| Direct OE replacement | Restores factory driveshaft alignment without modification — based on OE 37235-1120 application data. |
| Broad cross-reference coverage | Replaces COB1120, MD-1009, N2315000 — simplifies inventory for Hino truck distributors. |
| QC Item | Verification Method |
|---|---|
| Bearing bore diameter | Bore gauge inspection against 50 mm specification |
| Rubber hardness | Shore A durometer sampling |
| Rubber-to-metal bond | Visual and peel inspection |
| Rotational smoothness | Manual spin test for bearing noise/vibration |
- Mark driveshaft-to-flange alignment before removal.
- Support the driveshaft and remove the center bearing mounting bolts.
- Inspect universal joints and driveshaft for wear; replace if necessary.
- Install the new center bearing 37235-1120, aligning the marks made during removal.
- Torque mounting bolts to Hino workshop manual specification (torque value to be supplied).
Inspect every 80,000 – 120,000 km, or immediately if driveshaft vibration or noise is observed.
- Standard export packaging: poly bag + neutral carton.
- Suitable for wholesale distributors, driveshaft repair specialists, and fleet maintenance suppliers.