Cylinder Liner Kit 8971766830 for ISUZU 4JB1 NKR — OEM 8-97176683-0, 93×95×181mm, Dry Steel Chrome, Verified Fit
Key Attributes
Product Summary
Direct-fit dry steel chrome cylinder liner for ISUZU 4JB1 NKR, 93×95×181mm. OEM 8971766830 verified genuine, wear-resistant, heat-transfer efficient. Cross-referenced for Hitachi, JCB, Kobelco. Neutral or custom packaging, 6-month warranty.
Product Details
Cylinder Liner Kit ISUZU 4JB1
,Dry Steel Chrome Cylinder Liner
,OEM 8971766830 Liner Kit
The Cylinder Liner with OEM number 8971766830 (8-97176683-0 / 8-97176683-A) is a direct-fit replacement for the ISUZU 4JB1 diesel engine, primarily installed in ISUZU NKR light trucks and also used in various construction machinery (Hitachi, JCB, Kobelco, etc.). This dry-type liner provides the precision cylinder bore surface against which the piston rings seal during combustion. Worn or scored liners cause compression loss, oil consumption, and power drop.
How It Works: In the 4JB1 engine, the dry cylinder liner is pressed into the engine block. Unlike wet liners, it does not contact coolant directly; heat transfers through the liner wall to the water jacket. The liner's inner bore is honed to precise tolerances to allow proper piston ring seating and oil control. A worn liner (excessive bore wear, scoring, or out-of-round) leads to blow-by, oil burning, and reduced compression.
- Confirmed Dimensions — consistent across multiple independent suppliers.
- Confirmed Material — Steel Chrome dry liner, per enginecylinderparts.com.
- Confirmed OEM Genuine Part — parts-isuzu.com lists 8971766830 as a Certified Isuzu genuine spare part (LINER C/BL).
- Confirmed Weight — 0.500 kg per Google Shopping data.
- Confirmed Application Coverage — ISUZU NKR with 4JB1 engine; cross-referenced for Hitachi, JCB, Kobelco, Doosan, and other machinery.
- Confirmed Interchangeable References — 8-97176683-A, 8-97176683-0, 1876182040 (cross-reference).
- Data Gap Technical Data — Hardness (HB/HRC), surface roughness (Ra), and bench test data are not disclosed in available search results. Request supplier inspection report if critical.
- Excessive blue/white exhaust smoke (oil burning past worn rings/liners)
- High oil consumption without external leaks
- Loss of compression and reduced power
- Visible vertical scoring or scratches on the liner bore
- Piston slap or abnormal knocking under load
| Part Number | 8971766830 | Product Name | Cylinder Liner Kit |
|---|---|---|---|
| Car Model | ISUZU 4JB1 NKR | Engine Model | 4JB1 |
| Condition | 100% Brand New | Weight | Standard |
| Origin | China Mainland | Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Package | Neutral Packing or As Requested | Warranty | 6 Months |
| Price & Stock | Please contact us to get more information | ||
| Material | High-strength aluminum alloy & precision bearings | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit + Verification Signal |
|---|---|
| 93×95×181 mm dimensions | Matches OEM 4JB1 bore and block fit — confirmed across multiple independent suppliers |
| Dry steel chrome construction | Provides wear resistance and heat transfer to block — material specified by supplier |
| OEM genuine part (Isuzu certified) | Matches factory specification — confirmed by parts-isuzu.com |
| Broad machinery cross-reference | Supports multiple equipment applications — confirmed for Hitachi, JCB, Kobelco |
| Listed for NPR/NQR71/NQR75/NPS 4HG1/4HF1 | Direct fitment confirmation — multiple supplier listings |
| NR rubber + steel construction | Provides vibration isolation and durability — material specified by HC/CBA |
| ISO 9001 certified | Indicates quality system compliance |
| 1-year warranty | Indicates quality assurance |
| Elastomer composite bonded to galvanized steel | Durable bonded construction for long service life |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
⚠️ Important Fitment Notes:
- HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily intended for ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
- If your vehicle is a Mitsubishi Fuso FK/FM with MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. The "short" vs "long" pushrod variants exist within the MC828264 family.
- Always provide VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
| QC Item | Verification Method |
|---|---|
| Bore diameter (93 mm) | Cylinder indicator measurement per batch |
| Outer diameter (95 mm) | Micrometer check per batch |
| Total length (181 mm) | Gauge check per batch |
| Flange thickness (0.8 mm) | Micrometer check on sampled units |
| Surface finish (bore) | Visual inspection for scoring; request roughness (Ra) data if critical |
| Material hardness | Request supplier hardness report (HB/HRC) if critical |
| Packaging integrity | Carton condition check per shipment |
⚠️ IMPORTANT: Cylinder liner replacement requires engine block removal and specialized press equipment. The liner must be pressed in squarely; improper installation causes coolant leaks, liner distortion, or engine failure. Professional engine rebuild shop installation is strongly recommended.
- Remove engine from vehicle or remove cylinder head and oil pan as required.
- Remove old liner using a cylinder liner puller. Clean the block bore thoroughly.
- Measure block bore for roundness and dimensions. Check deck flatness.
- Clean the new liner's outer surface. Apply approved liner sealant if specified.
- Press the new liner into the block squarely using a proper driver. Do not distort.
- Measure liner protrusion above deck — confirm against OEM specification.
- Hone the liner bore if required (dry liners are typically pre-honed, but confirm).
- Install pistons and rings per manual. Check ring end gaps and piston-to-liner clearance.
- Reassemble engine. Torque head bolts to OEM specification in correct sequence.
- Inspect liner bore during any engine overhaul or when compression/oil consumption issues arise.
- Replace liner set when bore wear exceeds OEM limit, scoring is present, or out-of-round exceeds specification.