Crankshaft Gear 8-97079212-J for ISUZU NKR55 4JB1 — OEM 42 Teeth, Timing Gear, Verified Fit
Key Attributes
Product Summary
Direct-fit 42-tooth crankshaft gear for ISUZU NKR55 4JB1 diesel. Induction-hardened alloy steel ensures durability; ISO/TS16949 certified. OEM cross-reference 8970792120. Neutral or custom packaging available.
Product Details
Crankshaft Gear 8-97079212-J
,ISUZU NKR55 4JB1 Timing Gear
,OEM 42 Teeth Crankshaft Gear
The Crankshaft Timing Gear 8-97079212-J (8970792120) is a direct-fit OEM replacement designed for ISUZU NKR55 trucks equipped with the 4JB1 diesel engine. Manufactured from high-strength, induction-hardened alloy steel and produced under ISO/TS16949 quality certification, this 42-tooth gear delivers reliable engine timing synchronization and long service life.
This crankshaft gear is mounted on the crankshaft and meshes with the camshaft gear to maintain precise engine timing. The product label confirms Z=42 (42 teeth).
The crankshaft gear drives the timing gear train, ensuring the camshaft rotates at exactly half the crankshaft speed. This synchronization is critical for correct valve opening and closing relative to piston position. A worn gear — indicated by chipped teeth, excessive backlash, or keyway damage — causes timing errors, rough running, and potential valve-to-piston contact.
- Tooth Count Confirmed: Z=42 (42 teeth) — printed on the product label and consistent with supplier data.
- Fitment Confirmed: Listed for ISUZU NKR55 with 4JB1 engine.
- Material & Certification: High-strength alloy steel, induction-hardened; ISO/TS16949 certified.
- OEM Cross-Reference: Replaces 8-97079212-0 / 8970792120 and 8-94326351-0 / 8943263510. The -J suffix may denote a packaging or supplier variant; confirm with seller.
- Weight Data: Net weight 0.86 kg per supplier data. Confirm actual weight if critical.
- Technical Data Gap: Exact outer diameter, bore diameter, and keyway dimensions are not disclosed in available search results. Measure the original gear if precise matching is critical.
- Engine timing noise or rattle from the front cover
- Rough idle or misfire due to incorrect valve timing
- Visible chipped, worn, or polished teeth
- Excessive backlash between crankshaft and camshaft gears
- Keyway damage or loose fit on the crankshaft
| Part Number | 8-97079212-J | Product Name | Crankshaft Gear |
|---|---|---|---|
| Car Model | ISUZU NKR55 | Engine Model | 4JB1 |
| Condition | 100% Brand New | Size | — |
| Weight | Standard | Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe | Package | Neutral Packing Or Made As Requested |
| Warranty | 6 Months | Price & Stock | Please Contact Us For More Information |
| Material | High-strength alloy steel & precision bearings | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit & Verification Signal |
|---|---|
| 42-tooth count | Matches OEM timing ratio — confirmed by product label and supplier data |
| Induction-hardened alloy steel | Resists wear and tooth fatigue — material specified by supplier |
| ISO/TS16949 certified | Indicates automotive quality system compliance |
| Direct OEM replacement | Reduces installation time — no modification required |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
- HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily intended for ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
- If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. "Short" vs. "long" pushrod variants exist within the MC828264 family.
- Always provide the VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
| QC Item | Verification Method |
|---|---|
| Tooth count (42) | Count teeth on original and compare |
| Tooth profile and hardness | Sampled inspection; hardness report available on request |
| Bore diameter and keyway | Caliper / gauge measurement against original |
| Runout | Sampled dial indicator check |
| Visual defects (cracks, chips) | 100% visual inspection |
| Packaging integrity | Carton condition check per shipment |
- Disconnect the battery negative terminal. Drain coolant if necessary.
- Remove the front cover and timing components to access the crankshaft gear.
- Use a suitable puller to remove the old gear. Do not pry against the engine block.
- Clean the crankshaft nose and inspect the keyway for damage.
- Heat the new gear (if specified) or press it onto the crankshaft squarely. Ensure the key engages properly.
- Reinstall the timing belt/chain and front cover. Torque the crankshaft pulley bolt to OEM specification (confirm in manual).
- Rotate the engine by hand to verify timing marks align and there is no interference.
- Start the engine and check for abnormal noise.
- Inspect the crankshaft gear during any timing belt/chain service or engine overhaul.
- Replace if teeth are chipped, worn, or if timing marks cannot be aligned.