Fuel Filter Element 8-98149982-0 / 8981499820 For ISUZU D-MAX TFR TFS (4JJ1 4JK1) — Paper Cartridge, H90 Mm, OD95 Mm, OEM-Spec
Key Attributes
Product Summary
OEM-spec paper cartridge fuel filter (8-98149982-0) for ISUZU D-MAX 4JJ1/4JK1. Multi-layer media traps water and fine particles, protecting common-rail injectors. Verified 90x95x20mm fitment, dense cross-reference coverage (MAHLE, MANN, FLEETGUARD), ISO quality control, and neutral or custom packaging for export distributors.
Product Details
Fuel Filter Element for ISUZU D-MAX
,Paper Cartridge Fuel Filter 4JJ1 4JK1
,OEM-Spec Fuel Filter 8-98149982-0
The Fuel Filter Element with OEM references 8-98149982-0 / 8981499820 (and the frequently cross-referenced 8-98036-321-0 / 8980363210) is a verified replacement diesel fuel filter cartridge for ISUZU D-MAX (TFR/TFS) pickups and Holden Rodeo / Colorado derivatives equipped with the 4JJ1 (3.0L) and 4JK1 (2.5L) turbo-diesel engines, covering the 2007–2012 production window. This is the primary fuel filtration element responsible for removing water, particulate contamination, and microbial debris from the diesel fuel before it reaches the high-pressure injection pump and common-rail injectors.
The filter is a paper cartridge element (not a spin-on canister) that fits inside the factory fuel filter housing. The confirmed dimensional set is 90 mm height × 95 mm outer diameter × 20 mm inner diameter, with a 107 mm upper plastic section diameter. The filtration medium is a multi-layer paper construction designed to trap fine particles while maintaining adequate fuel flow to the high-pressure pump. This element is critical for protecting the common-rail injection system on the 4JJ1/4JK1 engines, where fuel contamination can cause injector sticking, pump wear, and costly drivability faults.
- Dimensional Set Verified: Height 90 mm, Outer Diameter 95 mm, Inner Diameter 20 mm, Upper Plastic Section Ø107 mm — confirmed by Euro4x4parts (FGO7165) and Comline (EFF339D) technical data.
- Filter Type Verified: Paper Cartridge (filter insert) — confirmed by Euro4x4parts ("Paper cartridge") and RIDEX 9F0192 ("Wkład filtra" / filter insert).
- OEM Interchange Verified: 8-98036-321-0 / 8980363210 is consistently grouped with 8-98149982-0 as an interchangeable OEM reference for the same D-MAX / Rodeo / Colorado application. 5-87615012-0, 8-98149-983-0, and 8-98149-982-0 are also documented as related OE references.
- Vehicle & Engine Coverage Verified: ISUZU D-MAX (TFR/TFS) 2007–2012, Holden Rodeo 3.0L Turbo Diesel 2007–2012, Holden Colorado 3.0L Turbo Diesel 2008–2012 — confirmed by Brettstruck and Euro4x4parts application data. 4JJ1-TC (3.0L) and 4JK1-TC (2.5L) engines — confirmed by Comline and Purflux fitment data.
- Cross-Reference Density Verified: MAHLE KX505D, F026402861, MANN WK9020 (via cross-reference), HERTH+BUSS J1339009, BLUE PRINT ADZ92317, FLEETGUARD FF4103, RYCO R2656P, SAKURA F-1508, WESFIL WCF108, CHAMPION CFF100486, ASHIKA 30-ECO013, JAPKO 3ECO013, MEYLE 41-14 323 0002, UFI 26.131.00 — confirmed across Comline, Hermans-Brems, Brettstruck, and piecesauto24 cross-reference data.
- Filtration Media Verified: Multi-layer / twin-layered paper — confirmed by Comline ("ECO filter") and Brettstruck ("Twin layered paper").
- HS Code Verified: 8421230000 (reference for fuel filter cartridges) — confirm at inquiry if customs classification is required.
Height Tolerance Across Aftermarket Brands: Some aftermarket alternatives list a height of 82.5 mm (RIDEX 9F0192, STARK SKFF-0870191) or 84.5 / 78.5 mm (Brettstruck) or 85 mm (SF-FILTER SK3598). The dominant OEM-specification height is 90 mm. Confirm the required height against the original filter or the filter housing depth to avoid insufficient sealing or bypass.
- Hard starting / extended cranking: A restricted fuel filter reduces fuel delivery to the high-pressure pump, causing hard cold starts and long cranking times.
- Loss of power / limp mode under acceleration: Insufficient fuel flow through a clogged filter triggers the ECU to limit rail pressure, resulting in power derate and limp mode — often accompanied by a P0087 (fuel rail pressure too low) fault code.
- Rough idle or misfire: Contaminated or restricted fuel delivery causes unstable combustion, especially at idle or low-load conditions.
- Excessive fuel consumption: A partially clogged filter forces the high-pressure pump to work harder, reducing overall fuel efficiency.
- Black smoke or excessive exhaust emissions: Poor fuel atomization from insufficient delivery pressure increases particulate emissions and visible smoke.
- Water contamination in the fuel system: A saturated filter element cannot effectively separate water from diesel, allowing moisture to reach the injection pump and injectors — a leading cause of corrosive wear and injector seizure.
- Fuel leak at the filter housing: A damaged or incorrectly seated filter O-ring allows diesel to weep from the housing joint.
Consequence of Ignoring Symptoms: A clogged or water-saturated fuel filter on a 4JJ1/4JK1 common-rail diesel can lead to high-pressure fuel pump failure, injector nozzle erosion, and complete loss of rail pressure — turning a low-cost filter replacement into a multi-thousand-dollar fuel system overhaul. On a working D-MAX or Rodeo, the fuel filter is a critical, low-cost maintenance item that should be replaced at the manufacturer's recommended interval to protect the injection system.
| Brand | Model / Series | Engine Reference | Representative Years |
|---|---|---|---|
| ISUZU | D-MAX (TFR, TFS) | 4JJ1-TC (3.0L), 4JK1-TC (2.5L) | 2007–2012 (from 10/2006) |
| ISUZU | D-MAX I (8DH) | 4JJ1-TC / 4JK1-TC | 2007–2012 |
| Holden | Rodeo | 3.0L Turbo Diesel | 2007–2012 |
| Holden | Colorado | 3.0L Turbo Diesel | 2008–2012 |
- Dimensional verification is critical: The dominant OEM height is 90 mm with a 95 mm OD and 20 mm ID. Some aftermarket brands offer 82.5 mm or 84.5 mm variants — confirm the required height and diameter against the original filter or the filter housing before ordering.
- Cartridge vs. spin-on: This is a cartridge filter insert that fits inside the factory housing. It is not a spin-on canister. Confirm the housing type before ordering.
- 4JJ1 vs. 4JK1: Both engines share the same fuel filter reference in the D-MAX platform. Confirm the engine code and VIN for final verification.
| Feature | Benefit & Verification Signal |
|---|---|
| 90 mm height × 95 mm OD | Matches the ISUZU D-MAX / Holden Rodeo / Colorado fuel filter housing for direct drop-in installation — verified by Euro4x4parts and Comline specifications. |
| Multi-layer paper media | Traps fine particulate contamination and separates water from diesel, protecting the high-pressure pump and common-rail injectors — confirmed by Comline ("ECO filter") and Brettstruck ("Twin layered paper"). |
| 20 mm inner diameter | Matches the filter housing center tube for correct sealing and flow path — confirmed by Euro4x4parts dimensional data. |
| 107 mm upper plastic section | Ensures correct seating and sealing against the housing cap, preventing unfiltered fuel bypass — confirmed by Euro4x4parts fitment notes. |
| Dense cross-reference coverage | MAHLE KX505D, F026402861, FLEETGUARD FF4103, RYCO R2656P provide multiple verifiable sourcing and quality options for distributors serving mixed D-MAX / Rodeo fleets. |
| OEM interchange with 8-98036-321-0 | Provides flexibility when the primary 8-98149982-0 reference is constrained — the two OE numbers are functionally interchangeable for the covered applications. |
| QC Item | Verification Method |
|---|---|
| Height | Caliper verification — 90 mm (confirm against original filter) |
| Outer diameter | Caliper verification — 95 mm |
| Inner diameter | Gauge verification — 20 mm |
| Upper plastic section diameter | Caliper verification — 107 mm |
| Media integrity | Visual inspection for pleat damage, contamination, or media separation |
| End cap bonding | Visual inspection for secure bonding between media and end caps |
| O-ring / seal condition | Visual inspection for cracks, deformation, or missing seal |
| Housing fitment | Test-fit against the original housing where possible — confirm the cartridge seats fully and the cap seals |
IMPORTANT: Used diesel fuel contains hazardous contaminants. Wear gloves and eye protection when changing the fuel filter. Dispose of used filters and fuel in accordance with local environmental regulations. Always refer to the ISUZU D-MAX workshop manual for the specific model. Bleed the fuel system after replacement to prevent air locks and hard starting.
- Confirm the required filter first: Verify the replacement filter's height (90 mm), outer diameter (95 mm), and inner diameter (20 mm) match the original element. Confirm the upper plastic section diameter (107 mm) engages the housing cap correctly.
- Relieve fuel system pressure: Loosen the fuel filler cap to relieve tank pressure. Do not smoke or work near open flames — diesel fuel is combustible.
- Remove the old filter: Open the filter housing cap (refer to the workshop manual for the specific housing design). Extract the old cartridge and drain the fuel into a suitable container.
- Clean the housing: Wipe the inside of the housing clean with a lint-free cloth. Inspect the housing for debris or water accumulation — if water is present, investigate the fuel source.
- Install the new filter: Seat the new 8-98149982-0 cartridge into the housing, ensuring the upper plastic section engages the cap correctly and the inner diameter seals against the center tube.
- Prime and bleed the fuel system: Cycle the ignition several times (without starting) to allow the low-pressure pump to fill the filter housing. Check for leaks at the housing cap before starting the engine.
- Start and verify: Start the engine and allow it to idle. Check for fuel leaks and verify smooth operation. If the engine runs rough or stalls, re-bleed the system according to the workshop manual.
- Replace the fuel filter according to the ISUZU maintenance schedule — typically every 20,000–30,000 km or 12 months, or more frequently in dusty or low-quality fuel environments.
- Drain water from the fuel filter housing at every oil change (if equipped with a water drain) — water accumulation is a leading cause of injector corrosion.
- Use only clean, high-quality diesel fuel — contaminated fuel accelerates filter clogging and injection system wear.
- Inspect the filter housing for cracks or seal damage at every filter change — a damaged housing can allow unfiltered fuel to bypass the filter.
- Standard packing: Neutral packaging / customer-branded packaging available. Bulk export carton available.
- Package contents: 1 × Fuel Filter Element (Cartridge). Housing cap O-ring may or may not be included depending on the supply channel — confirm at inquiry.
- Set options: Filter element only (standard) / filter + O-ring kit (where available) — specify at inquiry.
- Suitable for: ISUZU D-MAX / Holden Rodeo / Colorado diesel fuel system repair shops, pickup fleet maintenance departments, common-rail injection specialists, spare parts distributors, and export wholesalers.