Engine Mount 8-97201-671-0 for ISUZU NPR NQR 4HG1 4HF1 — OEM Front LH Rubber Mount, 2.0–2.2kg, Verified Fit
Key Attributes
Product Summary
Direct-fit front left engine mount (OEM 8-97201-671-0) for ISUZU NPR/NQR71/NQR75/NPS with 4HG1/4HF1 diesel engines. NR rubber + steel construction, ISO 9001 certified, 1-year warranty. Isolates vibration and torque, resists corrosion. Verify weight with seller.
Product Details
Engine Mount 8-97201-671-0
,ISUZU NPR NQR 4HG1 4HF1 Mount
,OEM Front LH Rubber Mount
The Engine Mount with OEM number 8-97201-671-0 (8972016710) is a direct-fit replacement for the front left position on ISUZU NPR, NQR71, NQR75, and NPS trucks equipped with 4HG1 or 4HF1 diesel engines. This rubber-and-steel mount secures the engine to the chassis while isolating vibration and torque reactions from the cabin and frame.
How It Works: The engine mount consists of a natural rubber block bonded to a galvanized steel bracket. It supports the engine weight, absorbs vibration from combustion and road input, and accommodates slight engine movement under acceleration and braking. A worn mount causes excessive engine movement, clunking noises, and increased cabin vibration.
- Position Confirmed as Front LH: Autopiter lists "Подушка двигателя LH" (left engine mount) for NQR71/75. Guangzhou Bochi lists "发动机脚胶 LH" for NPR/4HG1. eBay lists "Engine Mount Left" with 455 compatible vehicle variants.
- Fitment Confirmed: Listed for ISUZU NPR, NQR71, NQR75, NPS with 4HG1, 4HF1 engines.
- Material & Certification: NR (Natural Rubber) + Steel; ISO 9001 certified; Black finish.
- Warranty: 1 year (HC Auto Parts / CBA Auto Parts).
- Technical Description (CBTAutoParts): Elastomer composite bonded to galvanized steel; medium-duty diesel engine mount; recommended inspection interval 150,000–220,000 km.
- Paired Opposite-Side Number: 8-97201-669-0 is the Front RH counterpart.
- Note Weight Data Conflict: HC lists 2.2 kg; Guangzhou Bochi lists 2 kg; CBA lists 0.9 kg. Confirm actual weight with seller.
- Note Technical Data Gap: Rubber hardness (Shore A) and rated load are not disclosed in available search results.
- Excessive engine vibration felt through the steering wheel, floor, or seats
- Clunking or knocking noise when accelerating, decelerating, or shifting gears
- Visible cracks, tears, or separation in the rubber element
- Engine movement beyond normal limits
- Sagging or misalignment of the engine relative to the chassis
| Part Number | 8-97201-671-0 |
| Product Name | Engine Mount |
| Car Model | ISUZU NPR NQR |
| Engine Model | 4HG1 4HF1 |
| Condition | 100% Brand New |
| Weight | Standard |
| Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Package | Neutral Packing Or Make It As Requested |
| Warranty | 6 Months |
| Price & Stock | Please Contact Us To Get More Information |
| Material | High-strength aluminum alloy & precision bearings |
| Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement |
| Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit + Verification Signal |
|---|---|
| Listed for NPR/NQR71/NQR75/NPS 4HG1/4HF1 | Direct fitment confirmation — multiple supplier listings |
| NR rubber + steel construction | Provides vibration isolation and durability — material specified by HC/CBA |
| ISO 9001 certified | Indicates quality system compliance |
| 1-year warranty | Indicates quality assurance |
| Elastomer composite bonded to galvanized steel | Enhances corrosion resistance and bonding strength — per CBTAutoParts |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
⚠️ Important Fitment Notes:
HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily intended for ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
If your vehicle is a Mitsubishi Fuso FK/FM with MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. The "short" vs "long" pushrod variants exist within the MC828264 family.
Always provide VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
| QC Item | Verification Method |
|---|---|
| Rubber hardness | Request supplier hardness report (Shore A) if critical |
| Bond integrity (rubber-to-metal) | Visual inspection and sampled pry test |
| Dimensional conformity | Compare against original mount (height, hole spacing) |
| Crack / tear inspection | 100% visual inspection |
| Weight check | Confirm actual weight with seller — conflicting data |
| Packaging integrity | Carton condition check per shipment |
⚠️ IMPORTANT: Engine mount replacement requires supporting the engine weight with a jack or hoist. Do not allow the engine to hang unsupported on the remaining mounts. Professional workshop installation recommended.
- Disconnect battery negative. Support the engine with a jack and wood block under the oil pan (do not deform the pan).
- Remove the nut(s)/bolt(s) securing the mount to the engine bracket.
- Remove the bolt(s) securing the mount to the chassis frame.
- Extract the old mount. Clean the mounting surfaces.
- Compare the new mount's height and mounting pattern against the original before installation.
- Install the new mount. Hand-tighten fasteners first, then torque to OEM specification (confirm in manual).
- Remove the engine support jack. Check engine alignment and vibration.
- Test-drive and listen for clunking or excessive vibration.
- Inspect engine mounts for cracks and separation every 40,000–60,000 km or during major service.
- Replace if rubber is cracked, bonding is separated, or excessive engine movement is observed.