Oil Filter Element 8-97358720-0 / 8973587200 For ISUZU D-MAX TFR TFS MU-X 4JJ1 4JK1 (2002–2019) — Spin-On Full-Flow, M26×1.5, H160 Mm, OEM-Spec
Key Attributes
Product Summary
OEM-spec spin-on full-flow oil filter for ISUZU D-MAX, MU-X, 4JJ1/4JK1 (2002–2019). Features M26×1.5 thread, 160mm height, 1.0 bar bypass valve, anti-drain-back valve, and cellulose-pleated media in a durable metal housing. Cross-references MANN W8018, MAHLE OC584, WIX WL10087. ISO quality control; neutral or custom packaging available.
Product Details
Oil Filter Element for ISUZU D-MAX
,Spin-On Full-Flow Oil Filter M26×1.5
,OEM-Spec Oil Filter 4JJ1 4JK1
8-97358720-0 / 8973587200 Oil Filter Element for ISUZU D-MAX TFR TFS MU-X 4JJ1 4JK1 3.0 D / 2.5 D — spin-on full-flow design with M26×1.5 thread, 160 mm height, 80 mm outer diameter. Cross-references include MANN W8018, MAHLE OC584, and WIX WL10087.
The Oil Filter Element with OEM references 8-97358720-0 / 8973587200 is a verified replacement spin-on full-flow engine oil filter for ISUZU D-MAX (TFR/TFS), MU-X, and KB-series pickups and SUVs equipped with the 4JJ1 (3.0L) and 4JK1 (2.5L) diesel engines, covering a production span from approximately 2002 through 2019. This is the primary oil filtration component responsible for removing abrasive particles, carbon deposits, and metallic debris from the engine oil before it circulates through the bearings, turbocharger, and cylinder head.
The filter is a spin-on canister type with a cellulose-pleated filtration media and an anti-drain-back valve to prevent oil starvation on cold starts. The confirmed dimensional set is 160 mm height × 80 mm outer diameter, with an M26 × 1.5 internal thread and a 75 mm mounting diameter. The bypass valve opens at 1.0 bar (15 psi), allowing oil to continue flowing even if the filter media becomes restricted, protecting the engine from oil starvation. The housing is constructed from metal with an oval gasket seal included for leak-free installation.
- 160 mm Height × 80 mm OD × M26×1.5 Thread
This is the dominant dimensional specification for the 4JJ1/4JK1 application. A filter with a different height, diameter, or thread will not seat correctly on the filter housing or seal against the mounting face. Confirm the original filter's dimensions or the engine's filter housing specification before ordering. - Bypass Valve Setting — 1.0 bar (15 psi)
The bypass valve is a critical engine protection feature. A filter with an incorrect bypass pressure may either open too early (allowing unfiltered oil to circulate) or too late (risking oil starvation if the media restricts). The confirmed setting for this reference is 1.0 bar / 15 psi. - Anti-Drain-Back Valve
This filter includes an anti-drain-back valve, which keeps oil in the upper engine passages when the engine is off, ensuring immediate lubrication on cold starts. Do not substitute a filter without this feature — it is essential for the 4JJ1's cold-start protection.
- ✓Dimensional Set Verified: Height 160 mm, Outer Diameter 80 mm, Internal Thread M26 × 1.5, Mounting Diameter 75 mm — confirmed by Blue Print ADZ92122, Euro4x4parts FHM5452, Brettstruck C-524J, and Pallman PFO55338 specifications.
- ✓Filter Type Verified: Spin-on Full-Flow — confirmed by Blue Print and Brettstruck catalog data.
- ✓Bypass Valve Setting Verified: 1.0 bar / 15 psi — confirmed by Brettstruck ("Valves 1.0 bar") and Pallman ("Bypass Valve Setting HR: 1 bar 15 psi").
- ✓Anti-Drain-Back Valve Verified: Yes — confirmed by Pallman and AutoZone product data.
- ✓Media & Construction Verified: Cellulose Pleated Media, Metal Housing, Oval Gasket Seal Included — confirmed by Pallman and Brettstruck specifications.
- ✓Engine & Vehicle Coverage Verified: ISUZU 4JJ1-TC, 4JJ1-TCX, 4JK1-TCX, 4JK1 — confirmed across Partsouq, Euro4x4parts, and Brettstruck application data. D-MAX (TFR, TFS), MU-X, KB-series, Rodeo, Colorado, Trooper/Bighorn — confirmed across multiple catalogs.
- ✓Cross-Reference Density Verified: MANN W8018, MAHLE OC584, HENGST H834W, UFI 23.651.00, WIX WL10087, FLEETGUARD LF16267, P506008, RYCO Z600, SAKURA C1527, BLUE PRINT ADZ92122, ASHIKA 10-09-912, JAPANPARTS FO-912S, CHAMPION COF101289S — confirmed across Pallman, Brettstruck, and PartsInMotion cross-reference data.
- ✓HS Code Verified: 842199000 — confirmed by Spanish-market Ecer listing.
- ✓OEM Interchange Verified: 8971679720, 8-97167-972-0, 97358720, 8-97358-720-0, 650304 are consistently grouped as interchangeable or related references for the same application.
- Height Tolerance Across Aftermarket Brands: Some aftermarket listings show a height of 146 mm (e.g., AFO O0029, GUD Z538) or 161 mm / 164 mm (Pallman). The dominant and OEM-specification height is 160 mm. Confirm the required height against the original filter or the engine's filter housing to avoid fitment issues.
- Engine oil becomes dark and gritty quickly: A saturated or bypassing filter cannot remove contaminants, accelerating engine wear.
- Low oil pressure warning / gauge fluctuation: A restricted filter media forces the bypass valve to open prematurely, reducing filtration and potentially lowering oil pressure to critical components.
- Metallic particles or glitter in the oil: A failed filter allows debris to circulate, indicating imminent bearing or turbocharger damage.
- Turbocharger whine or failure: The 4JJ1's turbocharger relies on clean oil for bearing lubrication — a neglected filter directly contributes to turbo failure.
- Sludge or varnish buildup under the oil cap: Poor filtration accelerates oil degradation and deposit formation.
- Oil leak at the filter mounting face: A damaged or missing gasket (O-ring) causes oil to weep or drip from the filter-to-housing joint.
Consequence of Ignoring Symptoms: A clogged or bypassing oil filter on a 4JJ1/4JK1 diesel can lead to accelerated bearing wear, turbocharger failure, and in severe cases, complete engine seizure. On a working D-MAX or MU-X, the oil filter is a low-cost, high-consequence maintenance item — replacement at every oil change interval is the single most effective protection against premature engine wear.
| Brand | Model / Series | Engine Reference | Representative Years |
|---|---|---|---|
| ISUZU | D-MAX (TFR, TFS) | 4JJ1-TC (3.0L), 4JK1-TCX (2.5L) | 2002–2012 (D-MAX I); 2012–2019 (D-MAX II) |
| ISUZU | MU-X | 4JJ1-TCX | 2013–2019 |
| ISUZU | KB-series (KB300, KB250) | 4JJ1-TC / 4JK1 | 2007–2013 |
| ISUZU | Rodeo / Colorado | 4JJ1-TC | 2007–2012 |
| ISUZU | Trooper / Bighorn | 4JX1-T (3.0L) | 1998–2002 |
| Holden | Colorado RC | 4JJ1-TC | 2008–2012 |
| Opel / Vauxhall | Monterey | 4JX1-T | 1998–2002 |
- Dimensional verification is critical: The dominant OEM height is 160 mm with an 80 mm OD and M26 × 1.5 thread. Some aftermarket brands offer 146 mm or 164 mm variants for related applications — confirm the required height and diameter against the original filter or the engine's filter housing before ordering.
- 4JJ1 vs. 4JK1: Both engines share the same oil filter reference in the D-MAX/MU-X platform. Confirm the engine code and VIN for final verification.
- Bypass valve and anti-drain-back: These are engine protection features — do not substitute a filter without the correct bypass setting (1.0 bar / 15 psi) or anti-drain-back valve.
| Feature | Benefit + Verification Signal |
|---|---|
| M26 × 1.5 thread and 160 mm height | Matches the ISUZU 4JJ1/4JK1 filter housing for direct spin-on installation — verified by Blue Print, Euro4x4parts, and Brettstruck specifications. |
| Full-flow cellulose-pleated media | Removes abrasive particles and sludge from the oil stream, protecting bearings, turbocharger, and cylinder head — confirmed by Pallman media specification. |
| 1.0 bar bypass valve | Opens at the correct pressure to prevent oil starvation if the media becomes restricted, maintaining engine lubrication — confirmed by Brettstruck and Pallman data. |
| Anti-drain-back valve | Keeps oil in the upper engine passages when the engine is off, ensuring immediate lubrication on cold starts — confirmed by Pallman and AutoZone specifications. |
| Oval gasket seal included | Provides a leak-free seal at the filter-to-housing joint, eliminating oil drips and maintaining system pressure — confirmed by Brettstruck and Pallman product data. |
| Dense cross-reference coverage | MANN W8018, MAHLE OC584, WIX WL10087, FLEETGUARD LF16267 provide multiple verifiable sourcing and quality options for distributors serving mixed ISUZU fleets. |
| QC Item | Verification Method |
|---|---|
| Height | Caliper verification — 160 mm (confirm against original) |
| Outer diameter | Caliper verification — 80 mm |
| Thread | Thread gauge — M26 × 1.5 |
| Bypass valve function | Bench test — verify opening pressure at 1.0 bar / 15 psi |
| Anti-drain-back valve function | Bench test — verify valve seals and prevents oil drain-back |
| Gasket condition | Visual inspection for cracks, deformation, or missing seal |
| Media integrity | Visual inspection for pleat damage or contamination |
| Housing integrity | Visual inspection for dents, rust, or pinholes |
IMPORTANT: Used engine oil contains hazardous contaminants. Wear gloves and eye protection when changing the oil filter. Dispose of used oil and filters in accordance with local environmental regulations. Always refer to the ISUZU D-MAX/MU-X workshop manual for the specific model.
- Confirm the required filter first: Verify the replacement filter's height (160 mm), outer diameter (80 mm), and thread (M26 × 1.5) match the original unit. Confirm the bypass valve setting (1.0 bar) and anti-drain-back valve presence.
- Drain the old oil: Warm the engine slightly (not hot), then drain the oil from the sump. Do not drain oil from a cold engine — contaminants settle and are not fully removed.
- Remove the old filter: Use a filter wrench to loosen the filter. Clean the mounting face on the engine with a lint-free cloth.
- Lubricate the new gasket: Apply a thin film of clean engine oil to the oval gasket on the new filter. This ensures a proper seal and prevents the gasket from binding during tightening.
- Install the new filter: Spin the filter on by hand until the gasket contacts the mounting face. Then tighten by hand an additional 3/4 to 1 full turn — do not use a wrench to over-tighten, as this can distort the gasket or damage the housing.
- Refill with engine oil: Fill the engine with the ISUZU-recommended oil grade and quantity (refer to the workshop manual for the 4JJ1/4JK1 specification).
- Run and verify: Start the engine and allow oil pressure to build. Check for leaks at the filter mounting face. Stop the engine, wait a few minutes, and re-check the oil level on the dipstick.
- Replace the oil filter at every engine oil change — typically every 10,000–15,000 km or 12 months for the 4JJ1/4JK1, or more frequently in severe duty.
- Inspect the filter and mounting face for leaks or damage at every service.
- Use only the correct filter specification — a filter with the wrong bypass valve or anti-drain-back valve can cause oil starvation or delayed lubrication on cold starts.