Front Wheel Hub Oil Seal 1-09625568-0 for ISUZU FSR FRR SBR — 75×112×10/17.5mm, NBR, Verified Cross-Ref
Key Attributes
Product Summary
Direct-fit front hub oil seal for ISUZU FSR/FRR/SBR/NRR (75×112×10/17.5mm). Spring-loaded NBR lip retains grease, blocks contaminants. Cross-ref 1-09625006-0 verified. FKM/silicone options, MOQ 5pcs, OEM-equivalent QC.
Product Details
Front Wheel Hub Oil Seal
,ISUZU FSR FRR SBR Oil Seal
,75×112×10/17.5mm NBR Oil Seal
Direct-fit OEM replacement front hub oil seal (OEM 1-09625568-0 / 1096255680) for ISUZU FSR, FRR, SBR and NRR trucks. Dimensions 75 × 112 × 10/17.5 mm, NBR material, interchangeable with 1-09625006-0.
The Front Wheel Hub Oil Seal with OEM number 1-09625568-0 (1096255680) is a direct-fit replacement for the front hub of ISUZU FSR, FRR, SBR and NRR trucks. It retains grease within the wheel bearing and prevents dust, water and debris from entering the bearing cavity.
How it works: the seal is pressed into the hub and rides against the rotating spindle surface. Its spring-loaded single-lip design maintains contact under slight misalignment, creating a barrier that keeps lubricant in and contaminants out. A worn or damaged seal allows grease to escape and water or dirt to enter, leading to accelerated bearing wear, noise and eventual hub failure.
- Dimensions confirmed: 75 × 112 × 10/17.5 mm (inner diameter × outer diameter × height) — consistent across multiple independent suppliers.
- Cross-reference verified: replaces 1-09625-568-0 and 1-09625006-0 (interchangeable). National Bearings lists 1-09625-568-0 as a cross-reference for its 710087 seal; Musashi and SNT also list both numbers as interchangeable.
- Material options recorded: NBR (standard), with FKM, Silicone and ACM available per supplier. NBR offers good low-temperature capability and hydrocarbon fluid resistance.
- Fitment confirmed: listed for ISUZU FSR (1987–1996), NRR (1988–1994) and FRR (1995–2004) front inner position; also listed for SBR and FRR 210/190.
- Weight recorded: net weight approximately 0.2 kg per pack of 2 pieces.
- MOQ signal: IZUMI supplier data shows a minimum order quantity of 5 pieces, indicating small-batch availability.
- Grease leakage visible around the hub or wheel
- Water or mud contamination inside the hub (milky grease)
- Grinding or rumbling noise from the wheel bearing
- Visible cracks, hardening or a torn lip on the seal
- Seal loose in the hub bore
| Part Number | 1-09625568-0 |
|---|---|
| Product Name | Front Wheel Hub Oil Seal |
| Car Model | ISUZU FSR, FRR, SBR |
| Engine Model | ISUZU FSR, FRR, SBR |
| Condition | 100% Brand New |
| Size | 75 × 112 × 10/17.5 mm |
| Weight | Standard (approx. 0.2 kg per pack of 2 pcs) |
| Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Package | Neutral packing or made as requested |
| Warranty | 6 months |
| Price & Stock | Please contact us for more information |
| Material | High-strength aluminum alloy & precision bearings |
| Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement |
| Quality Standard | OEM equivalent / ISO quality control |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
- HDA-008 / MC828264 are aftermarket cross-reference numbers that appear primarily in Mitsubishi Fuso brake booster catalogs. This product is primarily aimed at ISUZU FSR 6HE1 fitment; the numbers above are listed for customer cross-comparison.
- If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. "Short" and "long" pushrod variants exist within the MC828264 family.
- Always provide the VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
| Feature | Benefit + Verification Signal |
|---|---|
| OEM-matched fitment | Direct replacement for worn or warped original disc — OEM number confirmed across multiple suppliers |
| Metal construction | Withstands braking heat and friction — material confirmed by supplier listing |
| IZUMI aftermarket brand | Provides a cost-effective alternative — 3-month warranty per supplier |
| JAC OEM brand | Matches original factory specification — confirmed by Russian parts catalogs |
| Right-side position confirmed | Reduces wrong-side ordering risk — multiple suppliers specify "right" |
| 75 × 112 × 10/17.5 mm dimensions | Matches OEM hub bore and spindle — confirmed across multiple suppliers |
| Spring-loaded single-lip design | Maintains sealing contact under misalignment — design type confirmed by National Bearings |
| NBR material (standard) | Resists hydrocarbon fluids and low temperatures — temperature range documented |
| Interchangeable with 1-09625006-0 | Increases sourcing flexibility — cross-reference confirmed by multiple catalogs |
| Small MOQ (5 pcs) | Suitable for repair shops and small fleets — IZUMI supplier data |
| QC Item | Verification Method |
|---|---|
| Seal lip condition | 100% visual inspection for tears or deformation |
| Dimensional conformity | Verify against 75 × 112 × 10/17.5 mm reference |
| Rubber hardness | Request supplier hardness report (Shore A) if critical |
| Spring integrity | Sampled check for spring tension and retention |
| Fit in housing bore | Sampled press-fit check |
| Packaging integrity | Carton condition check per shipment |
- 1Raise and support the vehicle. Remove the wheel and brake caliper/drum as required to access the hub.
- 2Remove the hub assembly. Clean the hub bore and spindle surface thoroughly. Remove all old seal residue.
- 3Inspect the spindle surface for grooves or wear. A worn spindle will damage the new seal lip.
- 4Apply grease to the new seal lip. Position the seal squarely in the hub bore.
- 5Press the seal in using a seal driver until it seats flush with the housing surface. Do not distort the seal.
- 6Reinstall the hub and brake components. Torque fasteners to OEM specification.
- 7Check for leaks after a short test drive.
- Inspect hub seals for leakage during any brake or wheel bearing service.
- Replace if grease leakage, water intrusion or bearing noise is observed.
- Check wheel bearing play at every major service interval.