Rear Left Axle Wheel Nut 8973598100 / 8-97359810-0 For ISUZU CYZ EXZ FTR CXZ FVR — M30 Left-Hand Thread, 41×30×22 Mm, High-Strength Steel, Zinc Coated
Key Attributes
Product Summary
OEM 8973598100 rear left axle wheel nut for ISUZU CYZ/EXZ/FTR/CXZ/FVR. M30 LH thread, 41×30×22mm, high-strength steel, zinc coated, self-locking. Dense cross-reference coverage and neutral/custom packing for export.
Product Details
ISUZU rear left axle wheel nut
,M30 left-hand thread wheel nut
,zinc coated high-strength steel nut
The Rear Left Axle Wheel Nut with OEM references 8973598100 / 8-97359810-0 (factory cross-reference 1-42334023-0 / 1423340230) is a verified replacement wheel fastening component for ISUZU CYZ, EXZ, FTR, CXZ, FVR, and 700P heavy-duty commercial trucks. This is the left-hand threaded rear axle wheel nut used on the left side (driver side in LHD markets) of the rear axle to secure the dual wheels to the hub.
The nut is defined by its M30 left-hand (LH) thread, 41 mm outside diameter, 30 mm inside diameter, and 22 mm height — the critical dimensional set that ensures correct engagement with the wheel stud and proper clamping force on the rear dual-wheel assembly. It is manufactured from high-strength steel with a protective zinc coating for corrosion resistance, and features a self-locking design that maintains torque settings under heavy loads and frequent vibration.
This nut uses a left-hand thread (counter-clockwise to tighten). It is not a right-hand threaded nut and cannot be used on the right side of the vehicle. Left-hand and right-hand wheel nuts are intentionally opposite-threaded to prevent loosening from wheel rotation. Confirm the required side before ordering.
This is the rear left wheel nut. The right-side counterpart uses a different reference (typically a right-hand threaded nut, e.g., the 8973598090 / 8-97359809-0 family). Do not interchange left and right nuts.
The M30 thread is matched to the wheel stud size used on 6.0, 6.5, 7.5, and 8.0 ton ISUZU truck applications. Confirm the vehicle's tonnage rating and stud size before ordering — smaller N-Series trucks may use a different thread specification.
- VerifiedThread Specification: M30 left-hand (LH) thread — confirmed by Euro4x4parts ("Thread: M30 — Rear — Left side — Version: 6.0/6.5/7.5/8.0t") and Brettstruck ("LEFT HAND LH REAR WHEEL NUT").
- VerifiedDimensional Set: 41 mm OD × 30 mm ID × 22 mm height — confirmed by Brettstruck technical specification ("41MM OD X 30MM ID X 22MM H").
- VerifiedMaterial & Finish: High-strength steel with protective zinc coating and self-locking design — confirmed by GoTrucky product description.
- VerifiedVehicle & Model Coverage: ISUZU CYZ, EXZ, FTR, CXZ, FVR, 700P, NPR, NQR, NKR, NMR, NLR, ELF, VC46, JMC KY, N800, N900, N720, N725 — confirmed by Russian, Hindi, and Arabic supplier application lists.
- VerifiedCross-Reference Density: 8973598100, 8-97359810-0, 1-42334023-0, 1423340230, 1-42334-023-0, 1-42334-020-1, 1-42334-020-0, 1-42334-015-0, 9-42334-014-0, 9-42334-010-0 are consistently grouped as interchangeable or related references across FinditParts, Euro4x4parts, and Brettstruck catalogs.
- VerifiedSingle-Unit Weight Reference: 0.5 kg per unit (HOSEM/Italian Ecer listing) — confirmed as the individual nut weight. A 6-piece set weight of 4.31 lb (≈1.95 kg) is also referenced, consistent with approximately 0.32 kg per nut including packaging.
- VerifiedOEM Reference Status: 8-97359-810-0 is listed as a genuine ISUZU "NUT; WHEEL,RR" part with an MSRP of $15.66 on FinditParts.
- CautionPitch of M30 Thread Not Explicitly Published: While the thread diameter is confirmed as M30, the thread pitch (e.g., M30×1.5 or M30×2.0) is not explicitly stated in the accessible reference data. Confirm the pitch against the original nut or wheel stud if precision matching is required.
- Wheel nut will not torque or hold torque: Thread damage, stretching, or a worn self-locking feature prevents the nut from maintaining clamping force — a direct wheel security hazard.
- Visible thread damage, galling, or cross-threading: Damaged threads on the nut or stud reduce engagement and can lead to nut loosening under vibration.
- Corrosion or pitting on the nut body: Severe rust or zinc coating failure weakens the nut and can seize it to the stud, making future removal difficult.
- Nut loosening repeatedly despite correct torque: A worn or stretched nut (reduced cross-section) loses its elastic clamping force and should be replaced.
- Rounded or damaged hex corners: A nut with rounded hex faces cannot be safely torqued to specification and must be replaced.
- Visible cracks in the nut body: Any crack in a wheel nut is a critical safety failure — the nut must be replaced immediately.
| Part Number | 8973598100 / 8-97359810-0 |
|---|---|
| Product Name | Rear Left Axle Wheel Nut |
| Car Model | ISUZU CYZ EXZ FTR CXZ FVR |
| Engine Model | ISUZU |
| Condition | 100% Brand New |
| Size | Standard |
| Weight | Standard |
| Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Package | Neutral Packing Or Make It As Requested |
| Material | High-strength aluminum alloy & precision bearings |
| Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement |
| Quality Standard | OEM equivalent / ISO quality control |
| Brand | Model / Series | Representative Applications | Notes |
|---|---|---|---|
| ISUZU | CYZ / CXZ | 4HE1TC, 6WF1, 6WG1 | Core heavy-duty application |
| ISUZU | EXZ | 6WG1 | Confirmed by supplier application lists |
| ISUZU | FTR | Various | Confirmed by Russian, Hindi, and Arabic supplier data |
| ISUZU | FVR | 6HK1 / 4HK1 | Platform coverage confirmed |
| ISUZU | 700P | 4HG1 / 4HK1 | Confirmed by Ecer and supplier listings |
| ISUZU | NPR / NQR / NKR | Various N-Series | Extended platform coverage per GoTrucky and supplier data |
| JMC | KY | — | Cross-brand coverage confirmed |
- Left-hand thread is the first check: This nut has an M30 LH thread. It will not thread onto a right-hand threaded stud. Confirm the required side (rear left) before ordering.
- Thread pitch must be verified: While the diameter is confirmed as M30, the pitch (e.g., M30×1.5 vs. M30×2.0) is not published. Measure the original nut or stud if precision matching is required.
- Left vs. Right pairing: The right-side counterpart uses a right-hand threaded nut (e.g., the 8973598090 family). Do not substitute a LH nut for a RH application — the nut will not tighten correctly and will loosen under wheel rotation.
- Tonnage/stud size: The nut is referenced for 6.0–8.0 ton applications. Smaller N-Series trucks may use a different thread specification — confirm the vehicle's tonnage and stud size.
| Feature | Benefit + Verification Signal |
|---|---|
| M30 left-hand thread | Correct engagement with the LH rear wheel stud, preventing loosening from wheel rotation — verified by Euro4x4parts and Brettstruck thread specifications. |
| 41 × 30 × 22 mm dimensional set | Matches the wheel stud and hub interface for correct clamping force and wheel security — confirmed by Brettstruck technical data. |
| High-strength steel construction | Provides the tensile strength and fatigue resistance required for heavy-duty wheel fastening — confirmed by GoTrucky material specification. |
| Zinc coating | Protects against corrosion and rust, maintaining nut integrity and ease of removal in harsh operating environments — confirmed by GoTrucky finish specification. |
| Self-locking design | Maintains torque settings under heavy loads and frequent vibration, reducing the risk of loosening — confirmed by GoTrucky design description. |
| Genuine ISUZU reference availability | The 8-97359-810-0 reference is a genuine ISUZU part, providing an OEM-authenticity option — confirmed by FinditParts genuine listing. |
| Dense cross-reference coverage | 1-42334023-0, 1423340230, 1-42334-020-1, 9-42334-010-0 provide multiple verifiable sourcing paths when the primary reference is constrained. |
| QC Item | Verification Method |
|---|---|
| Thread diameter and hand | Thread gauge — verify M30 left-hand thread |
| Thread pitch | Pitch gauge verification against the original nut or stud — spec not publicly published |
| Outside diameter | Caliper verification — 41 mm |
| Inside diameter | Gauge verification — 30 mm |
| Height | Caliper verification — 22 mm |
| Material hardness / strength | Supplier material certificate or hardness test — high-strength steel specification |
| Zinc coating uniformity | Visual inspection for coating coverage and adhesion |
| Self-locking feature | Torque test — verify resistance to loosening after tightening |
| Reference marking | Verify 8973598100 / 8-97359810-0 or "NUT; WHEEL,RR" legibility where present |
- Confirm the required nut first: Verify that the replacement is the rear left (LH thread) nut and that the M30 thread engages the stud correctly by hand before applying torque. Confirm the thread pitch matches the original stud.
- Clean the threads: Remove dirt, rust, and old thread-locking compound from the stud and nut threads. Do not lubricate the threads unless specified by the workshop manual — lubrication alters the torque-to-clamp-load relationship.
- Hand-thread the nut: Thread the nut onto the stud by hand until it seats against the wheel. If the nut does not turn freely by hand, stop — the thread hand or pitch may be incorrect.
- Torque in sequence: Tighten the wheel nuts in a star or cross pattern to the workshop manual specification. Torque values for heavy-duty ISUZU rear wheel nuts are typically in the range of 400–550 N·m — confirm the exact specification for the specific model and stud size.
- Re-torque after initial operation: Re-check wheel nut torque after the first 50–100 km of operation, and periodically thereafter. New or disturbed wheel assemblies can settle, causing torque loss.
- Replace, do not reuse, torque-to-yield nuts: Many heavy-duty wheel nuts are torque-to-yield (TTY) fasteners designed for single use. Confirm whether the original nut is reusable — if TTY, replace with new nuts whenever the wheel is removed.
- Check wheel nut torque at every service or every 10,000–15,000 km — use a calibrated torque wrench.
- Inspect wheel nuts for corrosion, thread damage, and rounded hex faces during every wheel service — replace damaged nuts immediately.
- Replace wheel nuts whenever the wheel is removed if the nuts are TTY or show any sign of wear. Wheel nut integrity is a non-negotiable safety requirement.
- Avoid impact wrench over-tightening — excessive torque can stretch the stud or nut, leading to failure.
- Standard packing: Neutral packaging / customer-branded packaging available. Bulk export carton available.
- Package contents: 1 × Rear Left Axle Wheel Nut. Washers, studs, and other hardware are not included unless explicitly stated — confirm at inquiry.
- Set options: Single nut (standard) / set of 6 or 10 for one axle side (where available) — specify at inquiry.
- Supply capacity: Confirm current capacity at inquiry.
- Suitable for: ISUZU CYZ / EXZ / FTR / CXZ / FVR / 700P wheel and axle repair shops, heavy-duty commercial truck fleet maintenance departments, tire service centers, spare parts distributors, and export wholesalers.