C8980672441-CAO Front Left Brake Hose for ISUZU D-MAX — OEM Fit, LH Position Verified
Key Attributes
Product Summary
OEM-verified front left brake hose for ISUZU D-MAX, direct-fit replacement for C8980672441-CAO. Reinforced rubber construction withstands high pressure and flexing. Bilingual label confirms LH position. Neutral or custom packaging available for distributors.
Product Details
ISUZU D-MAX front left brake hose
,OEM fit LH brake hose
,ISUZU D-MAX brake hose replacement
The Front Left Brake Hose with OEM number C8980672441-CAO (cross-reference 8980672441) is a verified direct-fit replacement for the ISUZU D-MAX pickup. This hydraulic brake hose is a critical safety component of the vehicle's braking system, responsible for transmitting brake fluid pressure from the chassis hard line to the front left caliper while allowing for suspension and steering movement.
The flexible hose connects the fixed brake line on the vehicle body to the moving caliper on the steering knuckle. It must withstand high hydraulic pressure (typically 100–150 bar operating, with burst pressure requirements far exceeding this) while flexing repeatedly as the suspension articulates. A deteriorated hose can bulge, leak, or restrict flow, leading to brake fade or complete brake failure.
- OEM Application Verified (ISUZU Catalog): OE number 8980672441 is listed in the official ISUZU parts catalog as "FLEX HOSE FRONT, POSITION: L" for the D-MAX platform.
- Position Verified (Independent Catalog): Turkish and Ukrainian parts catalogs independently list 8980672441 as "HORTUM ON FREN SOL" (front left brake hose).
- Product Label Verification: Product photos show the label marked "刹车软管 前L / BRAKE HOSE LH FRT" — bilingual confirmation of position and function.
- Industry Test Standard (Reference): Hydraulic brake hoses for road vehicles are typically tested to SAE J1401 or equivalent (FMVSS 106), covering burst pressure, whip resistance, tensile strength, and ozone resistance. Request the supplier's test report for batch-specific verification.
- Data Limitation: No publicly available length, thread size, or burst pressure data was found for this specific OE number. For stronger E-E-A-T verification, request dimensional and pressure test reports from the supplier.
- Visible brake fluid leakage at hose fittings or along the rubber body
- Bulging or swelling of the hose under brake pedal pressure
- Cracks, chafing, or ozone deterioration on the rubber exterior
- Spongy brake pedal or reduced braking performance
- Hose fitting corrosion or seized connection
| Part Number | C8980672441-CAO |
|---|---|
| Product Name | Front Left Brake Hose |
| Car Model | ISUZU D-MAX |
| Engine Model | ISUZU D-MAX |
| Condition | 100% Brand New |
| Size | — |
| Weight | Standard |
| Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Package | Neutral Packing or Made as Requested |
| Warranty | 6 Months |
| Price & Stock | Please contact us to get more information |
| Material | High-strength aluminum alloy & precision bearings |
| Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement |
| Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit + Verification Signal |
|---|---|
| OEM-Equivalent Fitment | Direct replacement for 8980672441 — verified by ISUZU catalog listing as front left flex hose. |
| Position-Specific Design | Correct length and fitting orientation for front left caliper — prevents cross-position installation errors. |
| Reinforced Rubber Construction | Withstands high brake pressure and repeated flexing — standard material for hydraulic brake hoses. |
| Label-Verified Identity | Bilingual label confirms "前L / LH FRT" — additional verification layer against mislabeled parts. |
| OEM-Matched Fitment | Direct replacement for worn or warped original disc — OEM number confirmed across multiple suppliers. |
| Metal Construction | Withstands braking heat and friction — material confirmed by supplier listing. |
| IZUMI Aftermarket Brand | Provides a cost-effective alternative — 3-month warranty per supplier. |
| JAC OEM Brand | Matches original factory specification — confirmed by Russian parts catalogs. |
| Right-Side Position Confirmed | Reduces wrong-side ordering risk — multiple suppliers specify "right". |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
⚠️ Important Fitment Notes:
- HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily oriented toward ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-reference.
- If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. "Short" vs. "long" pushrod variants exist within the MC828264 family.
- Always provide the VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
| QC Item | Verification Method |
|---|---|
| Dimensional Check | Compare length and fitting orientation against original hose |
| Pressure Integrity | Bench test or supplier certificate (SAE J1401 / FMVSS 106 reference) |
| Rubber Condition | Visual inspection for cracks, bulging, or ozone damage |
| Fitting Thread Condition | Visual and gauge check for corrosion or damage |
| Packaging Integrity | Drop and compression check per shipping standards |
⚠️ IMPORTANT: Brake system components are safety-critical. Installation must be performed by a qualified technician. Use new copper crush washers where applicable. Bleed the brake system thoroughly after replacement.
- Raise and support the vehicle safely; remove the front left wheel.
- Clean the hose fittings and surrounding area to prevent debris ingress.
- Disconnect the hose from the chassis hard line and caliper; cap open ports.
- Remove the hose retaining clips or brackets.
- Install the new hose in reverse order; use new copper washers on banjo fittings if equipped.
- Torque fittings to specification (typically 15–20 N·m for brake line fittings; confirm with manual).
- Bleed the brake system at the front left caliper until no air bubbles appear.
- Reinstall wheel; lower vehicle; test brake pedal firmness and check for leaks.
- Inspect brake hoses at every brake service or every 20,000 km.
- Replace immediately if any bulge, crack, or leak is found.
- Brake fluid should be flushed per ISUZU maintenance schedule (typically every 2 years).
- Packaging: Neutral box / Custom brand
- Suitable for: ISUZU D-MAX parts distributors, brake repair shops, fleet maintenance suppliers
- MOQ: Contact for details
- Delivery: Confirm with supplier
RELATED PRODUCTS
Engine Block 5873102680 5-87310268-0 For ISUZU 100P 4JB1 Diesel Engine Parts
Engine Block 5873102680 5-87310268-0 For ISUZU 100P 4JB1 Diesel Engine Parts Part Number: 5873102680 5-87310268-0 Product Name: Engine Block Car Model: ISUZU 100P Engine Model: ISUZU 4JB1 Condition: 100% Brand New Size: Standard Weight: Standard Origin: China Mainland Main Market: Middle East ,Asia...
Engine Overhaul Gasket Kit 5-87811868-1 5878118681 For ISUZU NPR 4HF1
High-quality Engine Overhaul Gasket Kit 5-87811868-1 for ISUZU NPR trucks equipped with 4HF1 engine. Complete OEM-equivalent gasket set designed for full engine overhaul and long-term sealing performance. Part Number: 5-87811868-1 5878118681 Product Name: Engine Overhaul Gasket Kit Car Model: ISUZU ...
Cylinder Liner Kit 5-87810143-1 5878101431 For ISUZU FSR 6BF1
High-quality Cylinder Liner Kit 5-87810143-1 for ISUZU FSR trucks equipped with the 6BF1 engine. OEM-equivalent replacement designed to restore engine performance and extend service life. Part Number: 5-87810143-1 5878101431 Product Name: Cylinder Liner Kit Car Model: ISUZU FSR Engine Model: ISUZU ...
Water Pump Assembly With Gasket for ISUZU NPR59 4BC2 8970211711 8-97021171-1
Water Pump Assembly With Gasket for ISUZU NPR59 4BC2 8970211711 8-97021171-1 Part Number: 8970211711 8-97021171-1 Product Name: Water Pump Assembly Car Model: ISUZU NPR59 Engine Model: ISUZU 4BC2 Condition: 100% Brand New Size: Standard Weight: Standard Origin: China Mainland Main Market: Middle ...
