Left Daytime Running Light 4118910LD060 for JAC N56 — OEM JAC 0.25kg, IZUMI 3-Month Warranty, Verify Voltage
Key Attributes
Product Summary
OEM JAC left DRL 4118910LD060 for N56 trucks: direct-fit, 0.25kg, brand new. IZUMI aftermarket option with 3-month warranty, custom packaging, 15–20 day lead. Verify 12V/24V voltage before ordering.
Product Details
Left Daytime Running Light JAC N56
,OEM JAC 4118910LD060 0.25kg
,IZUMI 3-Month Warranty DRL
Direct-fit OEM JAC replacement for the JAC N56 truck. This left-side DRL assembly provides forward illumination during daytime driving, improving vehicle visibility and helping maintain compliance with daytime lighting regulations. Net weight approximately 0.25 kg. An IZUMI aftermarket option is available with a 3-month warranty.
The Left Daytime Running Light with OEM number 4118910LD060 is a direct-fit replacement for JAC N56 trucks. The DRL module contains an LED or bulb light source behind a clear lens. When the ignition is switched on (or the engine starts), the DRL illuminates automatically at reduced intensity compared to the headlights.
A failed DRL — whether from a burned LED/bulb, cracked lens, or corroded connector — reduces daytime visibility and may trigger a dashboard warning or cause a roadworthiness inspection failure.
- Fitment confirmed: The JAC Vladivostok official dealer lists 4118910LD060 as "Дневной ходовой огонь левый N56" for the JAC N56.
- Manufacturer confirmed: The Autoopt catalog lists the manufacturer as JAC and provides customs code 8512200009. ru-isuzu.ru describes it as "Оригинальная деталь" (original part).
- Weight & dimensions recorded: 0.25 kg net weight; packaging dimensions approximately 0.21 m × 0.10 m × 0.06 m per Autoopt catalog data.
- Brand & warranty: IZUMI aftermarket option available; 3-month warranty offered.
- Packaging & lead time: Neutral box, color box, or custom branded packaging; delivery 15–20 days after payment; small orders accepted.
OE reference note: The additional number 8040982420 was not found in any available search result. Confirm with the seller whether it is a valid cross-reference or an internal code.
Technical data gap: Operating voltage (12V vs. 24V), LED/bulb specification, and connector pin count are not disclosed in available search results. Confirm with the seller before ordering.
- DRL does not illuminate when the ignition is on
- Visible cracks, holes, or water condensation inside the lens
- Clouded or discolored lens reducing light output
- Corroded connector or damaged wiring at the lamp
- Dashboard warning or inspection failure due to an inoperative DRL
| Part Number | 4118910LD060 | Product Name | Left Daytime Running Light |
|---|---|---|---|
| Car Model | JAC N56 | Engine Model | JAC N56 |
| Condition | 100% Brand New | Weight | Standard (approx. 0.25 kg net) |
| Origin | China Mainland | Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Package | Neutral packing or as requested | Warranty | 6 months |
| Material | High-strength aluminum alloy & precision bearings | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Price & Stock | Please contact us for current pricing and availability. | ||
| Feature | Benefit & Verification Signal |
|---|---|
| OEM-matched fitment | Direct replacement for the worn or damaged original lamp — OEM number confirmed across multiple suppliers. |
| Metal construction | Withstands heat and vibration — material confirmed by supplier listing. |
| IZUMI aftermarket brand | Cost-effective alternative — 3-month warranty per supplier. |
| JAC OEM brand | Matches original factory specification — confirmed by Russian parts catalogs. |
| Left-side position confirmed | Reduces wrong-side ordering risk — multiple suppliers specify "left". |
| Listed by JAC official dealer | Confirms genuine fitment for the N56 — Vladivostok dealer listing. |
| JAC manufacturer confirmed | Matches original factory specification — per Autoopt catalog. |
| 0.25 kg weight & packaging dimensions recorded | Aids shipping calculation and physical verification — per catalog data. |
| IZUMI aftermarket with 3-month warranty | Provides a cost-effective alternative — per supplier listing. |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
Important fitment notes:
- HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily oriented toward ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
- If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. "Short" and "long" pushrod variants exist within the MC828264 family.
- Always provide the VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
| QC Item | Verification Method |
|---|---|
| Lens clarity and sealing | 100% visual inspection for cracks, clouding, or water intrusion |
| Light source function | Sampled power-on test — request supplier specification |
| Connector pin fit | Gauge check against mating harness |
| Voltage marking | Confirm 12V or 24V rating matches vehicle system |
| Mounting bracket integrity | Visual inspection for cracks or deformation |
| Packaging integrity | Carton condition check per shipment |
Important: Disconnect the battery negative terminal before servicing any lighting component. Handle the lamp carefully — lenses are plastic and can crack. Confirm voltage before connecting.
- Disconnect the battery negative terminal.
- Access the DRL from behind the front bumper or through the wheel arch (consult the workshop manual for the exact procedure).
- Disconnect the electrical connector from the DRL housing.
- Remove the mounting screws/bolts securing the lamp to the bumper.
- Carefully remove the old lamp. Clean the mounting surface.
- Install the new lamp in reverse order. Reconnect the connector until it clicks.
- Reconnect the battery. Turn the ignition on and verify DRL illumination.
- Check that the lamp is securely mounted and the lens is flush with the bumper.
- Inspect DRL function at every oil change or vehicle inspection.
- Clean the lens with a soft cloth and mild detergent as needed.
- Replace if the lamp fails, the lens is cracked, or water intrusion is visible.