Half Shaft Bolt 9910100350-B for JAC Truck — OEM Replacement, Verified Fitment
Key Attributes
Product Summary
OEM direct-fit JAC half shaft bolt 9910100350-B, double-ended stud for secure drivetrain clamping. Metal construction, verified fitment, 3-month warranty. Neutral packing or custom. Request material and dimensional certificates for full specs.
Product Details
Half Shaft Bolt JAC Truck
,OEM Replacement Half Shaft Bolt
,JAC Spare Parts Half Shaft Bolt
JAC Half Shaft Mounting Bolt 9910100350-B — OEM direct-fit, double-ended stud, 3-month warranty available.
The Half Shaft Bolt with OEM number 9910100350-B is a direct-fit replacement for JAC trucks. It secures the half shaft (axle shaft) to the differential or hub assembly, maintaining drivetrain integrity under torque load.
This double-ended stud threads into the half shaft flange on one end and accepts a nut on the other (or threads into two components), clamping the half shaft securely. The unthreaded center section provides a shoulder for proper seating and alignment. Failure or loosening leads to drivetrain noise, vibration, or loss of drive.
- ✅Fitment Verified: Multiple supplier listings (IZUMI, Russian dealers) list 9910100350-B as a JAC half shaft bolt.
- ✅Warranty Available: IZUMI supplier lists a 3-month warranty.
- ⚠️Material & Mechanical Data Pending: No public material grade, tensile strength, hardness, or thread specification is available. Request from supplier: material certificate, mechanical property report, and thread gauge data.
- ⚠️Dimensions Not Publicly Standardized: The photo shows caliper measurement, but exact thread size (e.g., M10×1.25), overall length, and shoulder diameter are not published. Request dimensional drawing from supplier.
When this half shaft bolt fails or loosens, the following symptoms may appear:
- Clunking or clicking noise from the drivetrain during acceleration/deceleration
- Vibration or shudder at certain speeds
- Visible thread damage, stretching, or corrosion on the stud
- Half shaft flange separation or oil leak at the differential seal
- In extreme cases, loss of drive or half shaft detachment
- 9910100350-B (JAC OEM)
- 9910100350B (alternate format without hyphen)
| Part Number | 9910100350-B |
|---|---|
| Product Name | Half Shaft Bolt |
| Car Model | JAC Truck |
| Engine Model | JAC Truck |
| Condition | 100% Brand New |
| Size | — |
| Weight | Standard |
| Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Package | Neutral Packing Or Make It As Requested |
| Warranty | 6 Months |
| Price & Stock | Please Contact Us To Get More Information |
| Material | High-strength aluminum alloy & precision bearings |
| Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement |
| Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit + Verification Signal |
|---|---|
| OEM number matched | Direct replacement for 9910100350-B — confirmed by multiple supplier catalogs |
| Double-ended stud design | Allows secure clamping of half shaft flange — thread and material specs required from supplier |
| 3-month warranty available | Purchase confidence — offered by IZUMI supplier |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
- HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily oriented toward ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
- If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. "Short" vs "long" pushrod variants exist within the MC828264 family.
- Always provide the VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
| QC Item | Verification Method |
|---|---|
| Thread size & pitch | Request thread gauge report or CMM data |
| Overall length & shoulder diameter | Request dimensional inspection report |
| Material grade | Request mill certificate |
| Tensile strength / hardness | Request mechanical test report |
| Coating corrosion resistance | Request salt spray test data (if available) |
- Support the vehicle and relieve drivetrain load.
- Clean threads; inspect the mating flange for damage.
- Install the stud; torque to TBC — refer to JAC service manual. Use thread-locking compound if specified.
- Re-check torque after initial driving.
Inspect half shaft bolts for looseness or corrosion at every major service, or if drivetrain noise develops.
RELATED PRODUCTS
Brake Caliper Guide Pin (Large) JAC6490-009 for JAC N56 N75 N80 N120 — OEM Large Guide Sleeve
OEM large brake caliper guide pin JAC6490-009 for JAC N35–N120, N350 & KAMAZ Compass 5. Direct-fit front bracket sleeve ensures smooth caliper slide and even pad wear. New condition, OEM-equivalent ISO quality control, neutral or custom packing. Verify dimensions and material certificate with supplier before ordering.
Brake Caliper Guide Bushing JAC6490-008 for JAC N56 N75 N80 N120 — OEM Small Guide Sleeve
OEM small brake caliper guide bushing JAC6490-008 fits JAC N35–N120 trucks, ensuring smooth caliper slide and even pad wear. Direct-fit replacement with verified cross-reference. Request material certificate and dimensional drawing for quality assurance.
Hex Flange Bolt 9910120020-B for JAC Light Truck — OEM Replacement, Verified Application
OEM 9910120020-B hex flange bolt for JAC light trucks, direct-fit replacement. Flange head distributes clamping load without a washer; full-thread shank allows full-length adjustment. New metal construction, OEM-equivalent QC, 6-month warranty, neutral or custom packing. Confirm thread size, length, and material grade with supplier before ordering.
Rear Hub ABS Tone Ring 2029680020 for JAC N56 — OEM Replacement, Verified Fitment
OEM-matched rear hub ABS tone ring 2029680020 for JAC N56 trucks, delivering reliable wheel speed signals for ABS safety. Metal construction withstands braking heat; direct-fit replacement backed by a 3-month warranty. Bulk pricing and custom packaging available. Verify tooth count and dimensions with supplier before ordering.
