Front Right Door Trim Pad 8-97405305-7 8974053057 For ISUZU 700P NLR85 NPR75 NQR90 — Manual Window, Grey, Interior Panel, Direct Fit

The Front Right Door Trim Pad with OEM reference 8-97405305-7 / 8974053057 is a verified replacement interior panel for the ISUZU 700P and N-Series light truck platform, covering applications including NLR85, NPR75, NQR90, NMR85, and ELF. This is the front right-hand (RH / passenger side) door trim pad — the molded interior panel that covers the inner door shell, providing a finished cabin appearance, mounting provisions for the manual window crank and door handle, and factory-style cutouts for all controls.

The unit is confirmed as the manual window version with a grey finish. This is a defining fitment characteristic: the power-window variant uses a different control cutout and a different reference number (8-97405304 family, noted as "power window front" in Japanese parts catalog data). The manual-window specification is further confirmed by the Russian catalog description "Обшивка двери (механ.)" (door trim, mechanical/manual) for the equivalent RH reference 8974053056, which shares the same 8-97405305-x cross-reference family.

1. Front Right (RH / Passenger Side): This is the front right door trim pad. The left-hand counterpart uses a different reference. Left and right panels have mirror-image crank openings, handle cutouts, and speaker provisions. They are not interchangeable.
2. Manual Window (Crank) Configuration: This trim pad is provisioned for a manual window crank, not a power window switch. The power-window panel uses a different cutout and reference (8-97405304). Do not substitute one for the other without confirming the original door's window type.
3. Grey Finish: The confirmed colour is grey. If a different interior colour is required, verify the corresponding reference before ordering.

• Position Verified: Front Right (RH / Passenger Side) — confirmed by the reference catalog description "Front — Right side" for the 8-97405-305-x family.
• Window Type Verified: Manual window — confirmed by "For vehicle with manually window" in the reference listing and Japanese parts catalog data describing the 8-97405305 reference as "ﾉｿﾞｸﾊﾟﾜｰｳｲﾝﾄﾞｳﾌﾛﾝﾄ" (excluding power window front).
• Colour Verified: Grey — confirmed by "Grey colour" in the reference listing and "ｸﾞﾚｰ" (grey) in the Japanese catalog.
• Cross-Reference Density Verified: 8-97405305-7 / 8974053057 is part of the 8-97405-305-6, 8-97405-305-5, 8-97405-305-4, 8-97405-305-3 reference family, consistently grouped as the manual-window RH trim pad for the 700P/NLR85 application. 8974053056 is confirmed as the equivalent RH manual trim pad in the Russian catalog, with cross-references including 8-97405305-6, 8-97405-305-6, 8-97405367-0, 8974053670 and engine coverage 4HK1, 4JJ1, 6HK1.
• Vehicle & Engine Coverage Verified: ISUZU 700P / 4HK1 — confirmed by multiple factory-direct listings for the 8-97405305 trim cover family. ISUZU ELF NLR85AN with 4JJ1 engine — confirmed by Japanese parts catalog fitment data for the 8-97405305 reference. NPR75, NQR90, NMR85, NLR85, FVR34, FSR34, FSR90, EC7, ELF, KV100, NPR82 — confirmed as platform coverage for the equivalent RH manual trim pad (8974053056) sharing the same cross-reference family.
• Factory Number Verified: 8-97405305-PT is the factory/tooling reference for the 8-97405305 trim pad family.
• Specific -7 Suffix Data Limited: The exact suffix -7 is not individually described in publicly accessible reference data. The confirmed technical characteristics (RH, manual window, grey) are derived from the broader 8-97405-305-x family specification. Confirm the -7 suffix applicability against the original panel marking or VIN before ordering.

• Cracked or broken panel body: Impact damage, UV degradation, or improper removal can crack the plastic substrate, affecting appearance and mounting integrity.
• Broken or missing mounting clips / tabs: The panel is retained by factory-style clips. Broken retainers cause rattles, sagging, or partial detachment.
• Damaged manual window crank cutout: A cracked or distorted crank opening prevents the window handle from seating or operating smoothly.
• Damaged speaker grille or handle cutout: A cracked grille or distorted handle opening degrades interior appearance and prevents proper component fitment.
• Delamination or peeling of the textured finish: The surface skin can lift or peel over time, particularly in hot climates or high-use fleet vehicles.
• Stained or warped panel from moisture intrusion: A compromised door seal can stain or warp the interior panel.

A damaged door trim pad is primarily a cosmetic and comfort concern, but a panel with broken retainers can interfere with window crank operation and door handle function. For a commercial fleet vehicle, a deteriorated interior affects resale value and driver comfort — replacement with a correct-fit panel restores both appearance and function.

• Right vs. Left is the first check: This is the front right (RH) trim pad. The left-hand counterpart uses a different reference. Do not interchange left and right.
• Manual vs. power window is the second check: This is the manual crank configuration. The power-window panel uses the 8-97405304 reference family (noted as "power window front" in catalog data). Confirm the original door's window type before ordering.
• Colour: The confirmed finish is grey. If a different interior colour is required, verify the corresponding reference.
• Vehicle coverage breadth: While the core application is 700P / NLR85, the same manual-window trim pad architecture is shared across NPR75, NQR90, NMR85, FVR34, FSR34, FSR90, and ELF variants. Provide the VIN for final confirmation in mixed-fleet applications.

1. 1Confirm the required part first: Verify that the replacement is the front right (RH) panel and that it has the manual window crank cutout (not a power switch opening). Compare against the original panel.
2. 2Remove the original panel carefully: Use a plastic trim removal tool to release the perimeter clips. Start at the bottom edge and work upward.
3. 3Remove the window crank handle (manual window): Release the retaining clip or screw securing the crank handle before removing the panel.
4. 4Transfer reusable components: If the original speaker, door handle bezel, or armrest is in good condition, transfer it to the new panel.
5. 5Install the new panel: Align the top edge first, then seat the perimeter clips by pressing firmly along the edge. Do not force — if a clip will not seat, check alignment.
6. 6Reinstall the window crank: Reattach the crank handle and verify smooth window operation.
7. 7Clean with mild interior cleaner: Avoid harsh solvents that can degrade the textured finish.

• Inspect trim pad clips and surface condition at every interior service or every 20,000–30,000 km.
• Replace missing clips promptly to prevent rattles and panel sag.
• Avoid prolonged direct sunlight exposure where possible to reduce surface degradation.
• Clean with mild interior cleaner and a soft cloth.

• Standard packing: Protective carton with internal cushioning to prevent panel damage. Neutral or customer-branded packaging available.
• Package contents: 1 × Front Right Door Trim Pad (Manual Window, Grey). Mounting clips, window crank, speaker, and hardware are not included unless explicitly stated. Confirm at inquiry.
• Set options: Single RH panel / LH + RH pair (subject to LH availability) — specify at inquiry.
• Suitable for: ISUZU 700P / NLR85 / NPR75 / NQR90 / NMR85 / ELF interior repair shops, light truck fleet maintenance departments, collision repair centers, spare parts distributors, and export wholesalers.