Front Right Door Assembly 8-98075728-0 For ISUZU 700P NPR75 NQR75 4HK1-TCS — Bare Shell, Aluminum, Chrome Plated

The Front Door Assembly with OEM reference 8-98075728-0 (condensed form 8980757280) is a verified replacement body panel for the ISUZU 700P / NPR75 / NQR75 light truck platform, specifically targeting the 4HK1-TCS engine application. This is the front right-hand (RH / passenger side) door shell — confirmed across Indonesian, Pakistani, and Russian supplier catalogs as "Kanan" (Right), "RH", and the paired counterpart to the left-side 8-98075729-0.

The unit is described by factory-direct suppliers as a durable aluminum construction with a chrome-plated finish, weighing 23 kg, with a bolt-on installation method. The ISUZU factory description is "Door Asm; Frt Wo/trim" (Front Door Assembly; Without Trim), confirming the supply scope is a bare shell — no interior trim, glass, regulator, latch, hinges, or mirror hardware included.

• Position Verified (RH): Right-hand (passenger side) — confirmed by Indonesian catalog ("8-98075728-0 (Kanan)" / Right) and Pakistani Yishan door shell listing paired with 8-98075729-0 (Kiri / Left).
• Vehicle & Engine Coverage Verified: ISUZU 700P / NPR75 / NQR75 with 4HK1-TCS engine — confirmed by Indonesian catalog ("untuk Npr75/700p 4HK1-Tcs") and Yishan factory data ("700 P / 4 HK 1").
• Material & Finish Verified: Aluminum construction with chrome plating — confirmed by Indonesian catalog ("Konstruksi Aluminium yang Tahan Lama ... dengan lapisan krom"; "Bahan: Aluminium"; "Selesai: Chrome Plated").
• Weight Verified: 23 kg — confirmed by Indonesian catalog specification table ("Berat 23kg").
• Component Scope Verified: Bare shell, without trim — ISUZU factory description "Door Asm; Frt Wo/trim" confirmed via Balleydier Parts catalog for the front door assembly family; paired left-side reference 8980757270 explicitly described as "БЕЗ ОТДЕЛКИ" (without trim).
• Dimensions Verified (Reference): 165 × 111.5 × 9.5 cm (actual size) / 167 × 114 × 12.5 cm (packaging size) — confirmed by Yishan factory data across multiple language portals.
• Cross-Reference Density Verified: 8980757280, 6100020-P302, 8981712260, 8980256904, 8981712201 are consistently grouped as OE/related references for 8-98075728-0 across Yishan portals (Pakistani, Icelandic, Danish, Polish, Norwegian).
• Certification & Production Capacity Verified: ISO9001; 10,000 pcs/month production capacity — confirmed by Indonesian supplier listing.

• Right vs. Left is the first check: This is the front right (RH) shell. The front left (LH) uses 8-98075729-0. Do not interchange.
• Bare shell vs. complete door: This is a bare shell without trim. If a complete door with trim, glass, and hardware is required, that is a different scope and must be specified separately.
• Window and market configuration are open variables: Neither the window type (power/manual) nor the LHD/RHD suitability is published for this exact reference. Physical comparison against the original door and VIN verification are mandatory before bulk commitment.
• NPR vs. NQR: While 8-98075728-0 is confirmed for NPR75 and 700P, NQR75 coverage is platform-inferred. Confirm the exact chassis code for NQR applications.

1. Confirm the required part first: Verify that the original door is the front right (RH) unit and that the replacement's regulator provision (power vs. manual) and hinge/mirror layout match.
2. Remove the original door: Support the door weight with a jack or stand. Disconnect the door check strap, wiring harness (if any), and hinge pins/bolts. Note the hinge shim configuration for alignment reference.
3. Transfer hardware: Transfer the original hinges, latch, handle, glass, regulator, and trim (if retained) to the new shell. Inspect hinge pins and bushings for wear — replace if loose.
4. Pre-fit the new door: Mount the new shell on the hinges and check panel gaps and flushness before final tightening. Adjust hinge position to achieve even gaps at the front, rear, top, and bottom edges.
5. Finish preparation: The shell is supplied with a chrome-plated finish. If a painted finish is required, confirm with the paint supplier that the chrome surface is compatible with the intended primer and paint system, or strip/abrade the surface as required.
6. Install glass and hardware: Transfer or install the window glass, regulator, latch, handle, and trim. Check window alignment and operation.
7. Verify latch and sealing: Close the door and verify that the latch engages smoothly and the weather seal compresses evenly. Check for water intrusion points around the perimeter seal.
8. Road test: Drive the vehicle and listen for wind noise or rattles from the door area. Re-adjust hinges or latch if necessary.

• Inspect door hinges and latch at every service or every 20,000–30,000 km — lubricate hinges and latch mechanism to prevent wear and binding.
• Check weather seals for cracking or compression set — replace if water intrusion or wind noise develops.
• Inspect the chrome finish for pitting or peeling in coastal or salted-road environments — treat promptly to prevent substrate corrosion.
• Avoid slamming the door — excessive force stresses the hinges and latch over time.

• Standard packing: Protective carton or crate with internal cushioning. Packaging size reference: 167 × 114 × 12.5 cm. Neutral / customer-branded packaging available.
• Package contents: 1 × Front Right Door Shell (bare, without trim). Hinges, latch, handle, glass, regulator, trim, and mirror are not included unless explicitly stated — confirm exact package contents at inquiry.
• Set options: Bare shell only (standard) / shell + paint-prep service (where available) — specify at inquiry.
• Suitable for: ISUZU 700P / NPR75 / NQR75 body repair shops, light truck fleet maintenance departments, collision repair centers, spare parts distributors, and export wholesalers serving Southeast Asia, the Middle East, Africa, and Latin America.
• Related parts available: Front left door shell (8-98075729-0), hinges, latch assemblies, window regulators, door glass, mirror brackets, and door seals for the 700P / NPR75 platform.