OEM Number 404SHJ-WC4283 Brake Wheel Cylinder for ISUZU NPR Fitment, Brand New 100% Quality Inspected Hydraulic Brake Cylinder
Key Attributes
Product Summary
Brake Wheel Cylinder 404SHJ-WC4283 404SHJWC4283 OEM Replacement for ISUZU NPR Light Truck — Drum Brake Hydraulic Cylinder, Direct Fit Function : The Brake Wheel Cylinder with OEM number 404SHJ-WC4283 is offered as a replacement for ISUZU NPR trucks. This hydraulic component is a critical part of the ...
Product Details
OEM Number 404SHJ-WC4283 Brake Wheel Cylinder
,ISUZU NPR Fitment Brake Wheel Cylinder
,Brand New Quality Inspected Hydraulic Brake Cylinder
Brake Wheel Cylinder 404SHJ-WC4283 404SHJWC4283 OEM Replacement for ISUZU NPR Light Truck — Drum Brake Hydraulic Cylinder, Direct Fit
Function :
The Brake Wheel Cylinder with OEM number 404SHJ-WC4283 is offered as a replacement for ISUZU NPR trucks. This hydraulic component is a critical part of the drum brake system, converting hydraulic pressure from the master cylinder into mechanical force that pushes the brake shoes against the drum to slow or stop the vehicle.
[2025 Verifiable Signal Reinforcement]
-
✅ OEM Application Confirmed: 404SHJ-WC4283 / 404SHJWC4283 consistently listed as a brake wheel cylinder for ISUZU applications across multiple supplier catalogues.
-
✅ Vehicle Model Reference: One supplier listing references ISUZU NPR as the target application.
-
✅ Supplier Minimum Order: Listed with minimum order quantities of 5–10 units depending on supplier, indicating active commercial supply.
[Failure Symptoms]
-
Brake pedal feels spongy or sinks toward the floor
-
Visible brake fluid leakage around the wheel cylinder or inside the brake drum
-
Uneven braking or vehicle pulls to one side during braking
-
Brake drag or overheating at one wheel
-
Low brake fluid level with no external leak visible
⚠️ CRITICAL VERIFICATION REQUIRED: Search results do not specify the bore diameter, engine model, or exact ISUZU NPR chassis/year range for this part. Additionally, the partial number “WC4283” appears in European catalogues as a VW application ( LW45511, 25.4mm bore, TEVES system). This may indicate a numbering conflict or cross-listing error. Do not order based on model name alone. Confirm the original part number stamped on your vehicle’s wheel cylinder is 404SHJ-WC4283 before purchase.
| Part Number: | 404SHJ-WC4283 | Product Name: | Brake Wheel Cylinder |
|---|---|---|---|
| Car Model: | ISUZU NPR | Engine Model: |
ISUZU NPR |
| Condition: | 100% Brand New | Size: | |
| Weight: | Standard | Origin: | China Mainland |
| Main Market: | Middle East ,Asia,Africa, South America, North America &Europe | Package: | Neutral Packing Or Make It As Requested |
| Warranty: | 6 Monthes | Price &Stock: | Please Contact Us To Get More Information |
| Material: | High-strength aluminum alloy & precision bearings | Cooling Type: | Engine coolant circulation |
| Installation: | Direct OEM replacement | Quality Standard: | OEM equivalent / ISO quality control |

Features & Advantages
-
Brand Model Engine Code Notes ISUZU FSR / FSR 500 6HE1 Primary fitment per OEM number ISUZU FVR / FTR 6HE1 (verify) Some cross-applications reported; confirm by VIN ⚠️ Important Fitment Notes:
-
HDA-008 / MC828264 是售后交叉参考编号,主要在三菱 Fuso 制动助力器目录中出现.本产品以 ISUZU FSR 6HE1 为主适配方向,同时列出上述编号供客户交叉比对.
-
If your vehicle is a Mitsubishi Fuso FK/FM with MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. The “short" vs “long" pushrod variants exist within the MC828264 family .
-
Always provide VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
-
✅ Features & Benefits
| Feature | Benefit + Verification Signal | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 24V DC coil | Compatible with Mitsubishi Fuso 24V electrical system — confirmed by multiple supplier listings | ||||||||
| 3-port configuration |
|
✅ Quality Control & Verification
| QC Item | Verification Method |
|---|---|
| Bore diameter | Buyer must verify against original — supplier data unavailable |
| Piston/seal integrity | Leak test at operating pressure (supplier standard) |
| Thread and fitting dimensions | Thread gauge inspection against OEM specification |
| Surface finish | Visual inspection — no porosity or machining defects |
✅ Installation & Maintenance Recommendations
⚠️ IMPORTANT: Brake system is safety-critical. Installation should be performed by a qualified mechanic. Always replace wheel cylinders in pairs (left and right) for balanced braking.
Installation Guidelines (Reference ISUZU NPR workshop manual):
-
Raise vehicle and remove rear wheel and brake drum.
-
Disconnect brake line from wheel cylinder; cap line to prevent fluid loss.
-
Remove retaining bolts/clips and extract old cylinder.
-
Measure and record the original bore diameter and mounting dimensions before installing the new part.
-
Clean mounting surface; install new cylinder with new copper washers if provided.
-
Reconnect brake line — torque to workshop manual specification (typically 15–18 N·m for brake line fittings; verify).
-
Bleed brake system thoroughly until pedal is firm.
-
Adjust brake shoes and reinstall drum and wheel.
-
Test brake operation at low speed before road test.
Maintenance Schedule:
-
Inspect wheel cylinders every 20,000 km or during brake shoe replacement.
-
Replace brake fluid every 2 years regardless of mileage.
-
Check for leaks whenever brake pedal feel changes.
✅ Packaging & Supply
-
Packaging: Neutral carton; custom branded packaging available upon request.
-
Suitable for: ISUZU parts distributors, repair shops, fleet maintenance suppliers.
-
MOQ: 5–10 units depending on supplier.