OEM 3504020LD010 Accelerator Pedal Gas Pedal Direct Fit ISO/TS16949 Certified for JAC N56 JAC1040S Light Truck
| OEM Part Number: | 3504020LD010 | Material: | High-strength Aluminum Alloy & Precision Bearings |
| Return System: | Dual Return Springs | Vehicle Compatibility: | JAC N56, JAC 1040S |
| Pedal Type: | Electronic Or Mechanical (verify Against Original) | Condition: | Brand New |
| MOQ: | 10 Pcs | Delivery Time: | 5–8 Working Days |
| High Light: | OEM 3504020LD010 Accelerator Pedal,ISO/TS16949 Certified Gas Pedal,Direct Fit Throttle Pedal |
||
OEM Accelerator Pedal 3504020LD010 for JAC N56 and JAC 1040S light trucks — a direct-fit throttle pedal from the YIMI aftermarket brand, manufactured under ISO/TS16949 quality management.
The accelerator pedal with OEM number 3504020LD010 is a direct-fit replacement throttle pedal for JAC N56 and JAC 1040S light trucks. It transmits the driver's acceleration input to the engine control unit (ECU) or throttle linkage, controlling engine power output.
Working Principle: The accelerator pedal converts the driver's foot movement into an electrical signal (electronic type) or mechanical cable movement (mechanical type) that regulates the throttle valve or fuel injection quantity. The pedal must provide smooth, progressive response and return reliably to idle when released. A worn or faulty pedal causes hesitation, sticking, or delayed acceleration response.
- Confirmed OEM Number: 3504020LD010 — confirmed across multiple independent suppliers.
- Confirmed Part Name: Accelerator Pedal / Gas Pedal — confirmed in English, German, Dutch, and Russian listings.
- Confirmed Vehicle Compatibility: JAC N56, JAC 1040S.
- Confirmed Certification: ISO/TS16949 — per YIMI supplier listing.
- Confirmed Aftermarket Brand: YIMI.
- Confirmed MOQ: 10 pcs.
- Confirmed Delivery: 5–8 working days.
- Confirmed Warranty: 6 months (per Ecer listing) / 12 months (per some YIMI pages).
- Critical Pedal Type: Electronic (sensor) or mechanical (cable) — not specified in search results. The Ecer listing states "verify against original." Confirm your vehicle's pedal type before ordering.
- Pending Operating voltage, signal protocol (electronic type), connector pinout, pedal travel — not specified in available sources.
- Pending Bench test data (response linearity, return spring force, durability) — recommend supplying your own test report.
- Pending Installation success rate — recommend providing repair order statistics.
- Note One IZUMI listing labels this OEM number as "Brake Pedal Assembly," which conflicts with the majority of sources identifying it as an accelerator pedal. The majority of multilingual listings confirm "Accelerator Pedal."
- Sticking or binding accelerator pedal
- Delayed or unresponsive acceleration
- Erratic or surging engine speed
- Pedal does not return to idle position
- EPC or engine fault code related to accelerator pedal signal
| Part Number | 3504020LD010 | Product Name | Accelerator Pedal |
|---|---|---|---|
| Car Model | JAC N56 / JAC 1040S | Engine Model | JAC N56 / JAC 1040S |
| Condition | 100% Brand New | Size | — |
| Weight | Standard | Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe | Package | Neutral packing or as requested |
| Warranty | 6 months | Price & Stock | Please contact us for more information |
| Material | High-strength aluminum alloy & precision bearings | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit + Verification Signal |
|---|---|
| OEM-matched fitment | Direct replacement without modification — OEM number confirmed across multiple suppliers. |
| ISO/TS16949 certified (YIMI) | Quality management system compliance — stated by supplier. |
| Dual return springs (per supplier) | Redundant safety — pedal returns to idle even if one spring fails. |
| YIMI aftermarket brand | Established supplier with 5–8 day delivery — per listing. |
| QC Item | Verification Method |
|---|---|
| Pedal travel | Measurement against OEM spec spec pending |
| Return spring force | Spring tension test spec pending |
| Sensor output linearity (if electronic) | Voltage output test across travel range spec pending |
| Connector pinout (if electronic) | Continuity test against OEM wiring diagram data pending |
| Hinge smoothness | Manual operation check spec pending |
Important: Accelerator pedal replacement affects engine control. Confirm pedal type (electronic vs. mechanical) before ordering. For electronic pedals, the position sensor may require calibration with a diagnostic tool after installation.
- Disconnect the battery negative terminal.
- Remove the lower dash panel or trim for access to the pedal mounting.
- Disconnect the electrical connector (electronic type) or throttle cable (mechanical type).
- Remove the mounting bolts/nuts. Extract the old pedal.
- Install the new pedal. Torque the mounting fasteners per OEM spec torque spec pending — verify against JAC manual.
- Reconnect the electrical connector or cable. Adjust cable free play if applicable.
- If electronic, perform accelerator pedal calibration with a diagnostic tool if required.
- Reconnect the battery. Start the engine and verify smooth acceleration response.
Inspect the pedal for smooth operation and full return at every service. Check for binding, excessive play, or sensor fault codes. Replace when pedal response becomes erratic, sticking, or when fault codes indicate sensor failure. Keep the pedal area free of debris and obstructions.
- Neutral package or as customer request.
- Suitable for: wholesale distributors, repair workshops, and JAC parts suppliers.
- MOQ: 10 pcs.
- Delivery: 5–8 working days.
Engine Oil Pump Assembly 1010100FA01 For JAC1040 4DA1 Diesel Truck Engine
Engine Oil Pump Assembly 1010100FA01 For JAC1040 4DA1 Diesel Truck Engine Product Overview The Engine Oil Pump Assembly (OEM Number: 1010100FA01) is a premium-quality, direct replacement oil pump designed specifically for JAC1040 series trucks equipped with 4DA1 diesel engines. This essential engine ...
Clutch Master Cylinder 16041920380 For JAC 6700 Bus RHFC6700-16026010W 19.05mm
Clutch Master Cylinder 16041920380 For JAC 6700 Bus RHFC6700-16026010W 19.05mm Precision-engineered clutch master cylinder converts mechanical pedal force into hydraulic pressure, enabling smooth clutch engagement and disengagement for JAC 6700 buses and trucks. Product Specifications Part Number ...
Rear Left Brake Chamber BQ01290350 for JAC N80 Truck - Corrosion-Resistant Steel OEM Standard with High-Quality Synthetic Rubber
Rear Left Brake Chamber BQ01290350 for JAC N80 trucks. Direct OEM replacement with high-strength corrosion-resistant steel housing and OE-spec synthetic rubber diaphragm. Ensures reliable braking performance and balanced force distribution.
OE Quality Brake Pad Set with Heavy-Duty Steel Backing and High-Quality Semi-Metallic Friction Material for JAC N120 Heavy Truck
Brake Pad Set BN04000050-MCPSZ for JAC N120 heavy trucks. Features high-quality friction material, heavy-duty steel backing plate, and direct OEM fitment. Ensures safe deceleration, consistent braking power, heat resistance, and extended service life.
