OEM 8-97944569-0 Stabilizer Link Assembly Front Left M10×1.25 Anti-Roll Bar Link for ISUZU D-MAX TFR/TFS
| Thread Size: | M10 × 1.25 | Length: | 154–187 Mm (conflicting Data) |
| Weight: | 0.26–0.268 Kg | Material: | Steel |
| Finish: | Silver | Installation Position: | Front Axle Left |
| OEM Part Number: | 8-97944569-0 / 8979445690 | Interchangeable Reference: | 8-97235787-0, 8-97235787-1, 897944569051 |
| High Light: | Front Left Stabilizer Link Assembly,M10×1.25 Anti-Roll Bar Link,OEM 8-97944569-0 Sway Bar Link |
||
Front Stabilizer Bar Link Assembly 8-97944569-0 / 8979445690 for ISUZU D-MAX TFR/TFS and KB series — a direct-fit OEM replacement for the front left position, interchangeable with 8-97235787-1.
The Stabilizer Link Assembly with OEM number 8-97944569-0 (8979445690) is a direct-fit replacement for ISUZU D-MAX (TFR/TFS platform) and KB series models. This link connects the front stabilizer bar to the lower control arm on the left-hand side, transmitting torsional forces to reduce body roll during cornering.
How it works: The stabilizer link is a short coupling rod with ball-jointed ends. When the vehicle corners, the stabilizer bar twists and the link transfers that torsional load to the control arm, helping keep the chassis level and all tires in contact with the road. Worn link joints produce clunking noises over bumps and degrade handling precision.
- Position confirmed as Front Left: Multiple independent aftermarket brands (Comline, BLUE PRINT, FEBI, Apec, RIW) consistently list this OEM number as Front Axle Left.
- OEM cross-reference verified: Replaces 8-97944569-0 / 8979445690. Interchangeable references include 8-97235787-0 / 8972357870 and 8-97235787-1 / 8972357871.
- Thread specification recorded: M10 × 1.25 external thread per FEBI, BLUE PRINT, and RIDEX data. Apec lists M10×1.2 — a minor catalog variance.
- Weight & material recorded: 0.26 – 0.268 kg; steel construction; silver finish.
⚠️ Length data conflict — critical: Catalog listings report lengths of 154 mm (Apec), 155 mm (RIDEX), 180 mm (BLUE PRINT), 185 mm (ASHIKA/JAPKO), and 187 mm (FEBI). These may reflect different measurement points (overall length vs. thread-to-thread) or supplier-specific variants. Request a dimensional drawing or compare against the original part before ordering.
- Clunking or rattling noise from the front suspension over rough roads
- Excessive body roll or vague steering response during cornering
- Visible play or looseness at the link ball joints
- Torn or deteriorated dust boots on the link ends
| Part Number | 8-97944569-0 | Product Name | Stabilizer Link Assembly |
|---|---|---|---|
| Car Model | D-MAX TFR/TFS | Engine Model | D-MAX TFR/TFS |
| Condition | 100% Brand New | Size | — |
| Weight | Standard | Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe | Package | Neutral Packing Or Make It As Requested |
| Warranty | 6 Months | Price & Stock | Please Contact Us To Get More Information |
| Material | High-strength aluminum alloy & precision bearings | Cooling Type | Engine coolant circulation |
| Installation | Direct OEM replacement | Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit + Verification Signal |
|---|---|
| Front Left position confirmed across multiple brands | Reduces wrong-side ordering risk — Comline, BLUE PRINT, FEBI, RIW all list Front Left. |
| OEM cross-reference consistency | Reduces wrong-part risk — 8-97944569-0 and 8979445690 confirmed across RIDEX, Apec, Comline, BLUE PRINT. |
| M10×1.25 thread specification | Matches OEM fastening — confirmed by FEBI, BLUE PRINT, RIDEX. |
| Steel construction | Provides durability for suspension loads — material specified by FEBI and BLUE PRINT. |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
⚠️ Important fitment notes:
HDA-008 / MC828264 are aftermarket cross-reference numbers that appear primarily in Mitsubishi Fuso brake booster catalogs. This product is primarily oriented toward ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
If your vehicle is a Mitsubishi Fuso FK/FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. Both "short" and "long" pushrod variants exist within the MC828264 family.
Always provide the VIN/chassis number for verification. Do not rely solely on cross-reference numbers.
| QC Item | Verification Method |
|---|---|
| Overall length | Gauge check against original — conflicting supplier data (154–187 mm) |
| Thread size & pitch | Go/no-go gauge check (M10×1.25 reference) |
| Ball joint articulation | Sampled functional test — request supplier report if critical |
| Dust boot integrity | 100% visual inspection per supplier claim |
| Material & finish | Steel, silver per supplier specification |
| Packaging integrity | Carton condition check per shipment |
⚠️ Important: Stabilizer link replacement affects suspension geometry and handling. Replace in pairs (both front sides) for balanced performance. Professional workshop installation is recommended.
- Raise and support the vehicle; remove the front wheel on the affected side.
- Hold the link ball stud with a hex key or Torx bit to prevent rotation, then loosen and remove the nut securing the link to the stabilizer bar.
- Remove the nut securing the link to the lower control arm. Extract the old link.
- Compare the new link's length and thread engagement against the original before installation.
- Install the new link in reverse order. Tighten nuts to OEM specification (confirm in manual — typically 40–60 N·m range for stabilizer link nuts).
- Repeat on the opposite side if replacing in pairs.
- Reinstall the wheel; lower the vehicle. Test for clunking over bumps.
- Inspect stabilizer links for play and boot damage every 40,000–60,000 km or during suspension service.
- Replace in pairs if one link's ball joint is worn or the boot is torn.
King Pin Kit KP233 MI-10 for ISUZU 4JB1 NKR NPR 5-87830978-0 5878309780
King Pin Kit KP233 MI-10 for ISUZU 4JB1 NKR NPR 5-87830978-0 5878309780 Part Number: 5-87830978-0 5878309780 Product Name: King Pin Kit Car Model: ISUZU NKR NPR Engine Model: ISUZU 4JB1 Condition: 100% Brand New Size: Standard Weight: Standard Origin: China Mainland Main Market: Middle East ,Asia...
King Pin Set KP-224 MI-52 1-87830064-0 1878300640 For ISUZU FSR113 6BD1
High-quality King Pin Set 1-87830064-0 for ISUZU FSR113 trucks with 6BD1 engine. OEM-equivalent steering repair set designed for heavy-duty operation and long service life. Part Number: 1-87830064-0 1878300640 Product Name: King Pin Set Car Model: ISUZU FSR113 Engine Model: ISUZU 6BD1 Condition: 100...
Truck Kp222 King Pin Kits 1-87830039-0 Mi-56 Tk50rc Bearing 1878300390 For Isuzu Cvr Fvr
High-quality King Pin Kit KP222 for ISUZU CVR and FVR trucks. OEM-equivalent steering repair kit including bearings, designed for heavy-duty use and long service life. Part Number: 1-87830039-0 1878300390 Product Name: King Pin Kits Car Model: ISUZU Cvr Fvr Engine Model: ISUZU Cvr Fvr Condition: 100...
Wheel Hub Bolt for ISUZU NPR 4HF1 700P 8943833360 8-94383336-0
Wheel Hub Bolt for ISUZU NPR 4HF1 700P 8943833360 8-94383336-0 Part Number: 8943833360 8-94383336-0 Product Name: Wheel Hub Bolt Car Model: ISUZU NPR 700P Engine Model: ISUZU 4HF1 4HK1 Condition: 100% Brand New Size: Standard Weight: Standard Origin: China Mainland Main Market: Middle East ,Asia...
