8-97867722-1 Front Door Outside Handle Exterior Door Handle for ISUZU 100P 600P 4JB1 4KH1
| OEM Part Number: | 8-97867722-1 / 8978677221 | Net Weight: | 0.4 Kg |
| Material: | Metal / Plastic (verify) | Colour: | Black (Silver Variant Exists) |
| Installation Position: | LH / Front RH (verify) | Engine Compatibility: | 4JB1, 4KH1 |
| Vehicle Models: | ISUZU 100P, 600P | Condition: | Brand New |
| High Light: | 8-97867722-1 Front Door Outside Handle,ISUZU 100P 600P Exterior Door Handle,4JB1 4KH1 Door Handle |
||
The Front Door Outside Handle with OEM number 8-97867722-1 (8978677221) is a direct-fit replacement for ISUZU 100P and 600P trucks equipped with 4JB1 and 4KH1 diesel engines. This exterior door handle allows the driver or passenger to open the front door from outside the vehicle.
The exterior door handle is a mechanical linkage component. When pulled, it actuates a rod or cable connected to the door latch mechanism, releasing the latch and allowing the door to open. The handle pivots on a base mounted to the door skin. Wear or breakage at the pivot, return spring, or linkage attachment point causes a loose handle, failure to open the door, or a handle that does not return to its rest position.
- ✓OEM Cross-Reference Confirmed: 8-97867722-1 / 8978677221 appears consistently across multiple independent supplier listings.
- ✓Engine Coverage Confirmed: Listed for 4JB1 and 4KH1 diesel engines across supplier platforms.
- ✓Net Weight Recorded: 0.4 kg — consistent across multiple supplier pages for this assembly.
- ✓Supplier Certification: ISO 9001 / TS16949 referenced by primary suppliers.
- ⚠Colour Conflict — Critical: Primary Banzhu / isuzu-truckspares listings specify Black. An Ecer / BZLP listing for the same OEM number specifies Metal / Silver. Confirm the original handle colour on your vehicle before ordering.
- ⚠Position Ambiguity — Critical: Most Banzhu listings specify LH (Left Hand). Hushan Autoparts lists this number as Front RH = LH (interchangeable). Dorman / TRQ compatibility tables associate it with Driver Side and front/rear driver side applications. Confirm which door and side requires replacement before ordering.
- Handle feels loose or floppy, with excessive play
- Door fails to open when handle is pulled
- Handle does not return to rest position after release
- Visible cracks or breakage at the pivot point or mounting base
- Handle separates from the door skin or linkage rod
| Part Number | 8-97867722-1 |
|---|---|
| Product Name | Front Door Outside Handle |
| Car Model | 100P / 600P |
| Engine Model | 4JB1 / 4KH1 |
| Condition | 100% Brand New |
| Weight | Standard (approx. 0.4 kg assembly) |
| Origin | China Mainland |
| Main Market | Middle East, Asia, Africa, South America, North America & Europe |
| Package | Neutral Packing or Made as Requested |
| Warranty | 6 Months |
| Price & Stock | Please contact us to get more information |
| Material | High-strength aluminum alloy & precision bearings |
| Installation | Direct OEM replacement |
| Quality Standard | OEM equivalent / ISO quality control |
| Feature | Benefit & Verification Signal |
|---|---|
| OEM cross-reference consistency | Reduces wrong-part risk at the number level — 8-97867722-1 / 8978677221 confirmed across multiple independent suppliers. |
| 4JB1 / 4KH1 engine coverage | Supports fitment verification for 100P / 600P — listed consistently across supplier platforms. |
| 0.4 kg assembly weight | Consistent across supplier data — indicates stable part specification. |
| ISO 9001 / TS16949 supplier certification | Indicates manufacturing quality system compliance — referenced by primary suppliers. |
| Brand | Model | Engine Code | Notes |
|---|---|---|---|
| ISUZU | FSR / FSR 500 | 6HE1 | Primary fitment per OEM number |
| ISUZU | FVR / FTR | 6HE1 (verify) | Some cross-applications reported; confirm by VIN |
⚠ Important Fitment Notes:
HDA-008 / MC828264 are aftermarket cross-reference numbers, primarily appearing in Mitsubishi Fuso brake booster catalogs. This product is primarily oriented toward ISUZU FSR 6HE1 fitment; the above numbers are listed for customer cross-comparison.
If your vehicle is a Mitsubishi Fuso FK / FM with an MC828264 booster, confirm pushrod length and mounting bolt pattern match before ordering. Both “short” and “long” pushrod variants exist within the MC828264 family.
Always provide the VIN / chassis number for verification. Do not rely solely on cross-reference numbers.
| QC Item | Verification Method |
|---|---|
| Pivot function | Sampled functional test (handle returns to rest, smooth operation) — request supplier test report if critical. |
| Linkage attachment point | Visual inspection for cracks or deformation per supplier claim. |
| Colour consistency | Check against original handle colour — conflicting supplier data (black vs. silver). |
| Visual defects (cracks, breakage) | 100% visual inspection per supplier claim. |
| Packaging integrity | Carton condition check per shipment. |
⚠ Important: Door handle replacement requires removal of the interior door trim panel to access the linkage. Handle the trim clips carefully to avoid breakage. Professional workshop installation is recommended if you are unfamiliar with trim removal.
- Disconnect the battery negative terminal (if working near electrical components in the door).
- Remove the interior door trim panel. Carefully detach clips and disconnect any electrical connectors (window switch, etc.).
- Locate the exterior handle linkage rod or cable. Disconnect it from the old handle.
- Remove the mounting bolts / screws securing the handle base to the door skin (typically accessible from inside the door).
- Remove the old handle. Clean the mounting surface.
- Install the new handle in reverse order. Reconnect the linkage rod / cable and verify smooth operation before tightening all fasteners.
- Reinstall the interior trim panel and reconnect electrical connectors.
- Test door opening and closing from outside multiple times.
- Inspect the handle pivot and linkage attachment during any door trim removal or body service.
- Lubricate the pivot point with a dry-film lubricant if the handle becomes stiff (avoid grease that attracts dust).
- Replace if the handle is cracked, loose, or fails to actuate the latch.
King Pin Kit KP233 MI-10 for ISUZU 4JB1 NKR NPR 5-87830978-0 5878309780
King Pin Kit KP233 MI-10 for ISUZU 4JB1 NKR NPR 5-87830978-0 5878309780 Part Number: 5-87830978-0 5878309780 Product Name: King Pin Kit Car Model: ISUZU NKR NPR Engine Model: ISUZU 4JB1 Condition: 100% Brand New Size: Standard Weight: Standard Origin: China Mainland Main Market: Middle East ,Asia...
King Pin Set KP-224 MI-52 1-87830064-0 1878300640 For ISUZU FSR113 6BD1
High-quality King Pin Set 1-87830064-0 for ISUZU FSR113 trucks with 6BD1 engine. OEM-equivalent steering repair set designed for heavy-duty operation and long service life. Part Number: 1-87830064-0 1878300640 Product Name: King Pin Set Car Model: ISUZU FSR113 Engine Model: ISUZU 6BD1 Condition: 100...
Truck Kp222 King Pin Kits 1-87830039-0 Mi-56 Tk50rc Bearing 1878300390 For Isuzu Cvr Fvr
High-quality King Pin Kit KP222 for ISUZU CVR and FVR trucks. OEM-equivalent steering repair kit including bearings, designed for heavy-duty use and long service life. Part Number: 1-87830039-0 1878300390 Product Name: King Pin Kits Car Model: ISUZU Cvr Fvr Engine Model: ISUZU Cvr Fvr Condition: 100...
Wheel Hub Bolt for ISUZU NPR 4HF1 700P 8943833360 8-94383336-0
Wheel Hub Bolt for ISUZU NPR 4HF1 700P 8943833360 8-94383336-0 Part Number: 8943833360 8-94383336-0 Product Name: Wheel Hub Bolt Car Model: ISUZU NPR 700P Engine Model: ISUZU 4HF1 4HK1 Condition: 100% Brand New Size: Standard Weight: Standard Origin: China Mainland Main Market: Middle East ,Asia...
