ISUZU NPR 4HF1 Clutch Disc 0201080003 with Organic Facing and 12 inch (305 mm) Diameter Torsional Damper

Clutch Disc 0201080003 for ISUZU NPR NQR ELF 4HF1 4HE1 4BD2 — Verified OEM Fit Ø325 mm Organic Facing Clutch Plate

The Clutch Disc with part number 0201080003 is a verified direct-fit replacement for ISUZU NPR/NQR/ELF medium-duty trucks equipped with 4HF1/4HE1/4BD2/4HG1 diesel engines, and also fits certain truck applications. This clutch disc is a critical component of the manual transmission clutch system, responsible for transmitting engine torque to the transmission while allowing smooth engagement and disengagement of the drivetrain.

The clutch disc is positioned between the engine flywheel and the clutch pressure plate. It features a friction material facing on both sides that grips the flywheel and pressure plate surfaces when the clutch is engaged. The disc's torsional damper springs absorb engine torque fluctuations and dampen drivetrain vibration, ensuring smooth power delivery and protecting the transmission from shock loads. The disc is mounted on the transmission input shaft via a splined hub, allowing it to slide axially for engagement and disengagement while transmitting rotational torque.

Replace the clutch disc when any of these symptoms appear:

• Clutch slipping under acceleration — worn friction facing cannot transmit full engine torque
• Difficulty engaging or disengaging gears — damaged or warped disc prevents smooth clutch operation
• Chattering or shuddering during clutch engagement — worn damper springs or contaminated friction facing
• Burning smell from the clutch area — severe slipping produces characteristic burning odor
• Clutch pedal vibration or pulsation — warped or imbalanced disc transmits vibration
• Metal debris in the clutch housing — rivet or spline wear produces metal particles

IMPORTANT: Clutch system service must be performed by a qualified technician. Never reuse old clutch components — always replace the disc, pressure plate, and release bearing as a complete kit.

1. Preparation: Disconnect battery negative terminal. Raise vehicle on hoist. Remove transmission from engine.
2. Removal: Remove clutch cover bolts in diagonal sequence. Remove pressure plate and clutch disc.
3. Inspection: Inspect flywheel for flatness and surface condition. Resurface or replace if abnormal.
4. Installation: Position new clutch disc with alignment tool. Install pressure plate and tighten bolts to 19 N·m (14 lb·ft) in diagonal sequence.
5. Final Check: Verify clutch pedal free play. Check clutch release bearing operation.

• Standard Packaging: Anti-rust oil + VCI film + neutral carton
• Custom Packaging: Neutral box, color box, or customer-branded packaging
• Minimum Order Quantity: 5 PCS
• Supply Capacity: Stable batch supply with quality reports