OEM Diesel Fuel Rail Pressure Sensor 89458-71010 8945871010 499000-6121 499000-6120 For Toyota Hilux Vigo / Hiace / Land Cruiser Prado / RAV4 / Avensis 1KD-FTV 2KD-FTV 2AD-FTV — Denso 3-Pin Common Rai
| OEM Part Number: | 89458-71010 / 8945871010 | Part Name: | SENSOR; FUEL PRESSURE / Rail Pressure Sensor |
| Sensor Type: | Common Rail (High-Pressure) | Connector: | 3-Pin |
| Material: | Stainless Steel / ABS Metal | Protection Rating: | IP68 |
| Operating Temperature: | -40°C To +125°C | Engine Compatibility: | Toyota 1KD-FTV, 2KD-FTV, 2AD-FTV, 1HD-FTE, 5L |
| Vehicle Compatibility: | Toyota Hilux, Hiace, Land Cruiser Prado, RAV4, Avensis, Innova, Lexus IS | Production Years: | 2001–2016 (varies By Model) |
| Condition: | Brand New — 100% Quality Inspected | Warranty: | 12 Months |
| Working Pressure Range: | 0–2000 Bar (typical) / Max 200 MPa | Power Voltage: | 5V DC |
| Output Signal: | 0.5–4.5V Analog Voltage | ||
| High Light: | Toyota diesel fuel rail sensor,OEM fuel pressure sensor Denso,Toyota Hilux fuel rail sensor |
||
The Common Rail Fuel Pressure Sensor with OEM number 89458-71010 (also listed as 8945871010, 89458-71011, 89458-0K051) is a verified OEM-grade direct replacement for a wide range of Toyota diesel vehicles. Manufactured by Denso (model 499000-6121) to stringent OEM specifications, this high-pressure sensor is a critical component of the common rail fuel system.
- OEM Specification – Verified by Toyota OEM part numbers and Denso models
- Precision 3-Pin Connector – Verified connector type with Denso original equipment setup
- Proven Durability – Manufactured by Denso (Japan) with stainless steel housing and IP68 protection rating
- Verified OEM Fitment – Confirmed for Toyota Hilux Vigo (2005-2015), Hiace (2005-2012), Land Cruiser Prado 120 (2002-2009), and more
- OEM Cross-Reference Verified – Interchangeable with multiple part numbers including 89458-71011, 499000-6120, and aftermarket equivalents
- Critical Fuel System Component – Provides essential rail pressure data to ECU
If your rail pressure sensor is failing, you may experience one or more of the following symptoms:
- Engine Limp Mode / Reduced Power
- Hard Starting / Extended Cranking
- Rough Idle or Engine Stalling
- Excessive Exhaust Smoke
- Diagnostic Trouble Codes (DTCs) such as P0087, P0088, or P0191
- Poor Fuel Economy
- Engine Misfire
| Brand | Model | Chassis / Series | Engine | Years |
|---|---|---|---|---|
| Toyota | Hilux Vigo | KUN15, KUN25, KUN26, KUN35 | 1KD-FTV (3.0 D-4D), 2KD-FTV (2.5 D-4D) | 2005-2015 |
| Toyota | Hiace | KDH200, KDH201, KDH223, KLH12, KLH22 | 2KD-FTV, 1KD-FTV | 2005-2012 |
| Toyota | Land Cruiser Prado 120 | KDJ120, KDJ125 | 1KD-FTV (3.0 D-4D) | 2002-2009 |
| Toyota | RAV4 Mk3 | ALA30, ALA35 | 2AD-FTV (2.2 D-4D) | 2005-2013 |
| Toyota | Avensis T25 | -- | 1AD-FTV (2.0 D-4D), 2AD-FTV (2.2 D-4D) | 2003-2009 |
| Feature | Benefit |
|---|---|
| OEM Specification – Denso Genuine Equivalent | Guarantees factory-fit quality and performance |
| Precision 3-Pin Connector | Ensures secure, reliable electrical connection |
| Stainless Steel Housing with IP68 Rating | Withstands extreme fuel pressures and thermal cycling |
| 0-2000 bar Working Pressure Range | Accurately monitors rail pressure across full operating range |
| Wide Operating Temperature Range (-40°C to +125°C) | Ensures reliable performance in extreme conditions |
| Japan Manufacturing | Manufactured by Denso to OEM specifications |
| QC Item | Verification Method |
|---|---|
| Dimensional Accuracy | Precision inspection to verify connector dimensions and housing geometry |
| Pressure Response Test | 100% bench testing to verify accurate analog voltage output |
| Leakage Test | 100% high-pressure leak test to guarantee zero fuel leakage |
| Electrical Continuity Test | Full verification of 3-pin connector continuity and signal integrity |
| Thermal Cycle Test | 500+ hour thermal cycling from -40°C to +125°C |
| IP68 Ingress Protection Test | Verification of moisture and dust ingress protection |
Rail pressure sensor replacement requires depressurization of the fuel system, extreme cleanliness, and expert knowledge of common rail systems.
- Depressurize the fuel system before starting work
- Disconnect the negative battery terminal
- Use clean, high-quality fuel and replace fuel filter simultaneously
- Clean the area around the sensor and fuel rail to prevent contamination
- Verify connector type: Confirm your original sensor has a 3-pin connector
- Inspection: Every 50,000 km / 12 months
- Fuel Filter Replacement: Every 20,000-30,000 km
- Replacement: Recommended at 150,000-200,000 km or immediately if failure symptoms appear
- Packaging: Neutral box, color box, or customer brand package
- Pack Quantity: 1 PC
- Warranty: 12 Months
- Suitable for: Wholesale distributors, truck parts retailers, commercial vehicle repair shops, and fleet owners
OEM Diesel Fuel Rail Pressure Sensor 89458-60010 8945860010 499000-6080 499000-6081 For Toyota Corolla/Hilux/Hiace/Prado/RAV4/Avensis 1KD-FTV 2KD-FTV 2AD-FHV — Denso 6-Pin Common Rail Sensor
OEM Denso diesel fuel rail pressure sensor (89458-60010/8945860010) for Toyota 1KD-FTV/2KD-FTV/2AD-FHV engines. Features 6-pin connector, M22×1.5 thread, and metal housing for durability. Direct replacement for Corolla, Hilux, Hiace, Prado, RAV4, Avensis. Ensures precise fuel pressure monitoring, optimal combustion, and fuel efficiency.
OEM Idle Pulley Assembly 88440-0K160 88440-0K161 88440-0K163 For Toyota Hilux Vigo 2.5/3.0 D-4D 2005-2015 — 80mm A/C Compressor Belt Tensioner Pulley
OEM Idle Pulley Assembly 88440-0K160/0K161/0K163 for Toyota Hilux Vigo 2005-2015. 80mm diameter, high-grade metal construction with precision-sealed bearing. Direct replacement for A/C compressor belt tensioner in 2.5/3.0 D-4D engines. 12-month warranty, brand new condition.
OEM Air Conditioning Compressor 88310-0K230 883100K230 Denso 10S15C For Toyota Fortuner / Innova / Hiace / Hilux Diesel — 7PK 120mm Clutch 12V R134a With PAG 46 Oil
OEM A/C Compressor 88310-0K230 (Denso 10S15C) for Toyota Fortuner/Innova/Hiace/Hilux. Features 7PK 120mm clutch, 12V operation, R134a refrigerant with PAG 46 oil. 100% tested for noise, leaks, and durability. Direct fit replacement with 12-month warranty.
Front Upper Control Arm Assembly 48067-29225 4806729225 For Toyota Hiace/Commuter/Regius 2005-2014 — OEM Left-Hand (LH) Suspension Arm With Ball Joint
OEM Front Upper Control Arm Assembly 48067-29225 for Toyota Hiace/Commuter/Regius 2005-2014. High-strength cast steel construction with corrosion-resistant black finish, M16×1.5 thread, 16.7 mm cone size, 371 mm length. Direct bolt-on fitment with 12-month warranty and ISO/TS16949 certification.
