ISUZU NPR ELF Inner Rear Hub Oil Seal with Dual-Lip Design and NBR Material for OEM Fit 80*113*12/22 mm
| Inner Diameter: | 80 Mm | Seal Type: | Dual-Lip, Metal Case |
| Height / Thickness: | 12 / 22 Mm | Net Weight: | 0.17 Kg |
| Outer Diameter: | 113 Mm | Material: | NBR (Nitrile Butadiene Rubber) |
| Temperature Range: | −40°C To +120°C | Tensile Strength: | ASTM D412 |
| High Light: | Dual-Lip Design Inner Rear Hub Oil Seal,NBR Material Wheel Hub Seal,OEM Fit Rear Axle Oil Seal |
||
Inner Rear Hub Oil Seal 8-94336316-0 8943363160 for ISUZU NPR ELF NQR 4HK1 4BD1 4HF1 — Verified OEM Fit 80*113*12/22 mm NBR Wheel Hub Seal
The Inner Rear Hub Oil Seal with OEM numbers 8-94336316-0 and 8943363160 is a verified direct-fit replacement for ISUZU NPR / ELF / NQR / NKR / NMR light and medium-duty trucks equipped with 4HK1 / 4BD1 / 4HF1 / 4HG1 diesel engines. This oil seal is a critical rear wheel hub sealing component, responsible for retaining hub lubrication and preventing dirt, water, and debris from entering the inner rear wheel bearing assembly to ensure smooth bearing operation and extended component life.
The inner rear hub oil seal is installed in the rear wheel hub assembly, creating a dynamic seal between the rotating hub and the stationary axle housing. It retains gear oil and grease within the inner wheel bearing cavity while preventing external contaminants from entering. The dual-lip design features a primary sealing lip that maintains contact with the axle shaft surface under spring tension, and a secondary dust lip that blocks water, mud, and debris from reaching the primary seal. The NBR (Nitrile Butadiene Rubber) construction with metal case provides excellent resistance to gear oil, high temperatures, and compression set, ensuring reliable sealing under all operating conditions.
Replace the inner rear hub oil seal when any of these symptoms appear:
- Gear oil leakage at the rear wheel hub — visible oil traces on the inner wheel or brake backing plate
- Wheel bearing noise or vibration — oil loss and contaminant entry cause accelerated bearing wear, producing growling or rumbling noises from the rear axle
- Brake contamination — oil leaking past a failed seal can contaminate brake shoes or pads, reducing braking effectiveness
- Water or mud intrusion — damaged dust lip allows contaminants into the bearing cavity, causing rust and pitting on bearing surfaces
- Excessive wheel bearing play — prolonged seal failure leads to bearing degradation and detectable wheel play
| Verification Item | Data / Standard | Source / Method |
|---|---|---|
| Part Number (Short) | 8-94336316-0 | ISUZU OEM Parts Database |
| Part Number (Long) | 8943363160 | ISUZU OEM Parts Database |
| Part Name | SEAL; OIL, RR HUB, INNER | ISUZU EPC |
| Vehicle Models | ISUZU NPR / ELF / NQR / NKR / NMR / NPR66 / J116 / N600 | ISUZU application catalog |
| Engine Compatibility | 4HK1 / 4BD1 / 4HF1 / 4HG1 | ISUZU application catalog |
| Inner Diameter | 80 mm | Musashi I3513 specification |
| Outer Diameter | 113 mm | Musashi I3513 specification |
| Height / Thickness | 12 / 22 mm | Musashi I3513 specification |
| Material | NBR (Nitrile Butadiene Rubber) | Musashi I3513 material specification |
| Seal Type | Dual-Lip, Metal Case | Product specification |
| Net Weight (per unit) | 0.17 kg | Musashi I3513 specification |
| H/S Code | 870850000 | Customs classification |
| Position | Rear Axle — Inner Hub | Product specification |
| Installation Success Rate | ≥ 99% | Based on repair order tracking |
| Certification | ISO/TS 16949 | Third-party system audit |
| Part Number: | 8-94336316-0 8943363160 | Product Name: | Inner Rear Hub Oil Seal |
| Car Model: | NPR | Engine Model: | NPR |
| Condition: | 100% Brand New | Size: | Standard |
| Weight: | Standard | Origin: | China Mainland |
| Main Market: | Middle East, Asia, Africa, South America, North America & Europe | Package: | Neutral Packing Or Make It As Requested |
| Material: | High-strength aluminum alloy & precision bearings | Cooling Type: | Engine coolant circulation |
| Installation: | Direct OEM replacement | Quality Standard: | OEM equivalent / ISO quality control |
Primary Applications
| Brand | Model | Chassis | Engine | Years |
|---|---|---|---|---|
| ISUZU | ELF | NKR66 / NKR71 | 4HF1 / 4HG1 | 1994–2002 |
| ISUZU | ELF | NPR66 | 4HF1 | 1994–2002 |
| ISUZU | NPR | NPR | 4HK1 / 4BD1 | 1986–Present |
| ISUZU | NQR | NQR | 4HK1 / 4HF1 | 1996–Present |
| ISUZU | NKR | NKR | 4BD1 / 4HF1 | 1986–2007 |
| ISUZU | NMR | NMR | 4HK1 | 2006–Present |
| ISUZU | NPR J116 / N600 | — | 4BD1 | — |
| ISUZU | NPR66 | NPR66 | 4HF1 | — |
Non-ISUZU Applications (Same Platform):
| Brand | Model | Application |
|---|---|---|
| JMC | 1040 | Light Truck |
- This oil seal is designed for the 80*113*12/22 mm application. Confirm the dimensions of your original oil seal before ordering.
- The ISUZU N-Series rear hub uses one inner oil seal per side. Verify the required quantity before ordering.
- Oil seals should be replaced in pairs (both sides of the rear axle) to maintain balanced bearing protection.
- For right-hand drive (RHD) vehicles, verify clearance and orientation. Refer to the ISUZU workshop manual for the correct procedure.
| Feature | Benefit + Verification Signal |
|---|---|
| Dual-Lip Metal-Cased Design | Primary sealing lip retains gear oil while secondary dust lip blocks water and debris — verified by product specification and functional testing. |
| NBR (Nitrile Butadiene Rubber) | Excellent resistance to gear oil, grease, and high temperatures (−40°C to +120°C) — verified by ASTM D471 immersion testing and material certificate. |
| OEM-Exact 80*113*12/22 mm Dimensions | Precision-matched to the ISUZU NPR/NQR/ELF rear hub bore — direct press-fit installation without modification — verified by CMM dimensional inspection. |
| Spring-Loaded Lip | Maintains consistent contact pressure on the axle shaft surface for reliable sealing at all operating speeds — verified by functional testing. |
| ISO/TS 16949 Quality System | Full traceability with material certificates and batch inspection reports — third-party certified. |
| Installation Success Rate ≥ 99% | Based on repair order tracking — confirms reliable fitment across the NPR/NQR/ELF platform. |
| QC Item | Verification Method / Standard |
|---|---|
| Inner Diameter (80 mm) | CMM, 100% inspection |
| Outer Diameter (113 mm) | CMM, 100% inspection |
| Height (12 / 22 mm) | CMM, 100% inspection |
| Lip Geometry Angle | Optical comparator, 100% inspection |
| Material Hardness (Shore A) | Durometer, batch sampling |
| Fluid Immersion Resistance | ASTM D471 — 70h @ 100°C in gear oil |
| Compression Set | ASTM D395 — 70h @ 100°C |
| Tensile Strength | ASTM D412, batch sampling |
| Metal Case Bonding | Peel test, batch sampling |
| Surface Finish | Visual inspection — no flash, no contamination |
| Batch Traceability | Material lot number + production date |
| Packaging Protection | Sealed bag + moisture barrier + carton |
Installation Guidelines — Reference ISUZU Workshop Manual
- Preparation: Raise the vehicle on a hoist. Remove the wheel and brake drum. Support the rear axle housing.
- Disassembly: Remove the axle shaft retaining nuts. Carefully withdraw the axle shaft assembly. Remove the old inner oil seal using a seal puller or pry bar.
- Inspection: Inspect the axle shaft sealing surface for wear, scoring, or pitting. Inspect the wheel bearing for wear or damage. Replace any damaged components.
- Cleaning: Clean the hub bore and axle shaft thoroughly. Remove all old seal material and grease.
- Installation: Coat the new oil seal lip with MP grease. Use a seal driver or socket that matches the seal outer diameter to press the seal into the hub bore until it is fully seated.
- Axle Shaft Installation: Carefully reinstall the axle shaft assembly. Tighten the rear hub spindle nut to 245 N·m (181 ft·lb). For the rear wheel bearing inner adjust nut, tighten to 68 N·m (50 lb ft) for initial seating, then tighten the outer adjust nut to 169 N·m (125 lb ft).
- Final Check: Verify the hub rotates smoothly without binding. Check for gear oil leakage at the seal.
- Road Test: Lower the vehicle and perform a road test to verify wheel bearing operation and noise levels.
Recommended Torque Values:
| Fastener | Torque |
|---|---|
| Rear Hub Spindle Nut | 245 N·m (181 ft·lb) |
| Rear Wheel Bearing Inner Adjust Nut | 68 N·m (50 lb ft) |
| Rear Wheel Bearing Outer Adjust Nut | 169 N·m (125 lb ft) |
Maintenance Schedule
- Every 10,000 km: Inspect oil seal for gear oil leakage. Check wheel bearing for abnormal noise or play.
- Every 40,000–50,000 km: Inspect wheel bearing condition. Replace oil seal if any leakage or damage is found.
- Whenever the wheel hub is removed: Always replace the oil seal with a new unit.
- When brake contamination is detected: Inspect oil seal immediately. Replace if any oil leakage is found.
- Standard Packaging: Sealed bag + moisture barrier + carton.
- Custom Packaging: Neutral box, color box, or customer-branded packaging.
- Suitable For: Wheel hub repair shops, ISUZU parts distributors, fleet maintenance centers.
- Supply Capacity: Stable batch supply with batch-level quality reports available.
- Minimum Order Quantity: 5 PCS
Engine Block 5873102680 5-87310268-0 For ISUZU 100P 4JB1 Diesel Engine Parts
Engine Block 5873102680 5-87310268-0 For ISUZU 100P 4JB1 Diesel Engine Parts Part Number: 5873102680 5-87310268-0 Product Name: Engine Block Car Model: ISUZU 100P Engine Model: ISUZU 4JB1 Condition: 100% Brand New Size: Standard Weight: Standard Origin: China Mainland Main Market: Middle East ,Asia...
Engine Overhaul Gasket Kit 5-87811868-1 5878118681 For ISUZU NPR 4HF1
High-quality Engine Overhaul Gasket Kit 5-87811868-1 for ISUZU NPR trucks equipped with 4HF1 engine. Complete OEM-equivalent gasket set designed for full engine overhaul and long-term sealing performance. Part Number: 5-87811868-1 5878118681 Product Name: Engine Overhaul Gasket Kit Car Model: ISUZU ...
Cylinder Liner Kit 5-87810143-1 5878101431 For ISUZU FSR 6BF1
High-quality Cylinder Liner Kit 5-87810143-1 for ISUZU FSR trucks equipped with the 6BF1 engine. OEM-equivalent replacement designed to restore engine performance and extend service life. Part Number: 5-87810143-1 5878101431 Product Name: Cylinder Liner Kit Car Model: ISUZU FSR Engine Model: ISUZU ...
Water Pump Assembly With Gasket for ISUZU NPR59 4BC2 8970211711 8-97021171-1
Water Pump Assembly With Gasket for ISUZU NPR59 4BC2 8970211711 8-97021171-1 Part Number: 8970211711 8-97021171-1 Product Name: Water Pump Assembly Car Model: ISUZU NPR59 Engine Model: ISUZU 4BC2 Condition: 100% Brand New Size: Standard Weight: Standard Origin: China Mainland Main Market: Middle ...
