Windshield Strip RH 8-98154665 898154665 For ISUZU 700P 4HK1 Truck Windshield Molding Trim

The Windshield Strip RH (OEM Numbers: 8-98154665 / 898154665) is a premium-quality, direct replacement exterior trim and sealing component designed specifically for ISUZU 700P series trucks equipped with 4HK1 diesel engines.

This right-hand windshield strip - also known as a windshield molding, windshield trim, or glass seal - is installed along the right side of the windshield opening. It provides a flexible, weather-tight seal between the windshield glass and the cab body, preventing water, dust, and wind noise from entering the cabin. It also helps hold the windshield in position and gives the vehicle a finished, original appearance.

• OE Quality: Manufactured to strict ISUZU dimensional and material specifications for perfect fit and function
• Superior Sealing: Prevents water, dust, and wind noise from entering the cab, protecting interior and electronics
• UV and Weather Resistant: High-quality rubber/plastic resists sunlight, rain, snow, and temperature extremes without cracking or fading
• Precision-Molded Fit: Exact profile matches the original windshield channel for easy, secure installation
• Restores Appearance: Replaces cracked, discolored, or missing trim to restore the vehicle's original look
• Protects Windshield: Helps hold the glass in position and reduces stress on the adhesive bond
• Direct Replacement: Matches OE mounting configuration - no modification required
• Long Service Life: Engineered for continuous outdoor exposure in commercial truck applications
• Easy Installation: Simple press-fit or clip-on installation with basic hand tools
• Cost-Effective Repair: Affordable replacement that prevents water damage and rust around the windshield opening

This windshield strip is specifically designed for ISUZU medium-duty trucks and commercial vehicles. Common applications include:

• ISUZU 700P (Medium-Duty Trucks)
• ISUZU 4HK1 Engine Specifications:
  • 4-Cylinder, Inline Turbo Diesel
  • Displacement: 5.2L
  • Application: Medium-duty trucks and commercial vehicles
• Also compatible with various ISUZU models using the same windshield opening and trim configuration

Professional auto glass technician or body shop installation recommended:

1. Ensure vehicle is clean and dry - Park on a level surface and allow the vehicle to dry if recently washed
2. Remove the old strip - Carefully pry out the old windshield strip using a plastic trim tool; avoid damaging the glass or paint
3. Clean the mounting channel - Remove all old adhesive, sealant, dirt, and debris from the windshield channel and cab body
4. Inspect for rust or damage - Check the channel and surrounding metal for rust, cracks, or deformation; repair if necessary
5. Dry-fit the new strip - Test-fit the new strip along the windshield edge to ensure proper alignment and length
6. Apply sealant (if required) - If specified, apply a thin bead of urethane or butyl sealant into the channel
7. Install the new strip - Starting at one end, press the strip firmly into the channel, working along the edge. Ensure it seats fully and evenly
8. Secure clips or adhesive - If the strip uses clips or adhesive, install them according to the manufacturer's instructions
9. Check for gaps - Inspect the entire length for gaps, loose sections, or improper seating
10. Clean excess sealant - Wipe away any excess sealant with a clean cloth and appropriate solvent
11. Test for leaks - Gently spray water along the windshield edge to check for leaks (do not use high pressure directly on the new strip)
12. Final inspection - Verify the strip is properly seated and the windshield is secure

• Material Verification: Confirms rubber/plastic compound meets ISUZU UV resistance, temperature, and durability specifications
• Dimensional Inspection: Strip profile, length, and mounting channel dimensions verified within OEM tolerances
• Flexibility Testing: Material tested for flexibility and crack resistance at high and low temperatures
• Visual Inspection: 100% checked for cracks, discoloration, or manufacturing defects
• Fit Testing: Sample assembled to ensure proper fit and sealing
• Packaged Safely: Protected and packaged to prevent damage during transit

• Neutral export packing or customized packaging available
• Carton or wooden case for safe transportation
• Fast delivery for stock items
• Shipping by Express Air or Sea