Clutch Kit 5-87610207-0 5876102070 For ISUZU NPS Truck Diesel Engine Truck Parts

Complete clutch kit restores smooth engagement and reliable torque transmission between engine and transmission, ensuring dependable gear shifting in ISUZU NPS trucks.

The Clutch Kit (OEM Numbers: 5-87610207-0 / 5876102070) is a premium-quality, direct replacement clutch assembly designed specifically for ISUZU NPS series medium-duty trucks. This comprehensive kit includes the clutch disc, pressure plate (clutch cover), and release bearing—all critical components required for a complete clutch overhaul.

• OE Quality: Manufactured to strict ISUZU dimensional and material specifications for perfect fit and function
• Complete Kit: Includes clutch disc, pressure plate, and release bearing—everything needed for full clutch replacement
• High Torque Capacity: Premium friction material and heavy-duty diaphragm spring handle high torque of ISUZU diesel engines
• Heat-Resistant Friction Material: Withstands high clutch operating temperatures without fading or glazing
• Smooth Engagement: Precision-matched components ensure smooth, chatter-free engagement and disengagement
• Consistent Pedal Feel: Diaphragm spring design offers low pedal effort and consistent release characteristics
• Dynamically Balanced: All rotating components balanced as a set to reduce vibration and ensure smooth operation
• Direct Replacement: Matches OE mounting bolt pattern, spline count, and release bearing interface
• Long Service Life: Engineered for medium-duty commercial truck applications and extended service intervals
• Restores Clutch Performance: Eliminates slipping, chattering, and hard shifting caused by worn clutch

This clutch kit is specifically designed for ISUZU medium-duty trucks and commercial vehicles. Common applications include:

• ISUZU NPS (Medium-Duty Trucks)
• Engine Applications: ISUZU NPS Diesel Engines (verify with VIN)
• Also compatible with various ISUZU models using the same clutch configuration

Professional mechanic or transmission specialist installation is strongly recommended:

1. Ensure vehicle is safely supported - Use appropriate jack stands or a lift to support the vehicle
2. Disconnect battery - Always disconnect the negative terminal before working
3. Remove the transmission - Support the transmission and remove it from the vehicle
4. Remove the old clutch assembly - Unbolt the pressure plate from the flywheel in criss-cross pattern
5. Inspect the flywheel - Check for cracks, hot spots, scoring, or wear; resurface or replace if necessary
6. Inspect the release bearing and pilot bearing - Replace if worn or noisy
7. Clean the flywheel surface - Remove all oil, grease, and debris from flywheel friction surface
8. Install the new clutch disc - Position with proper orientation (usually "flywheel side" marked)
9. Align the clutch disc - Insert clutch alignment tool through disc into pilot bearing
10. Install the new pressure plate - Position over disc and align with flywheel dowel pins
11. Install mounting bolts - Hand-start all bolts; tighten in criss-cross pattern to manufacturer torque specifications
12. Remove the alignment tool - Carefully withdraw from clutch assembly
13. Install the release bearing - Install new release bearing on release fork or input shaft retainer
14. Reinstall the transmission - Carefully reinstall and secure all mounting bolts
15. Check clutch operation - Verify proper clutch pedal feel and release function
16. Road test - Test drive to verify smooth engagement, no slipping, and proper gear shifting

• Material Verification: Confirms friction material and steel components meet ISUZU strength, heat resistance, and durability specifications
• Dimensional Inspection: Clutch disc diameter, spline count, pressure plate bolt pattern, and release bearing dimensions verified within OEM tolerances
• Friction Coefficient Testing: Sample tested to ensure consistent friction performance and heat resistance
• Diaphragm Spring Testing: Spring load and release characteristics tested to ensure consistent clamping force
• Dynamic Balancing: Each rotating assembly balanced to ensure smooth, vibration-free operation
• Visual Inspection: 100% checked for cracks, friction material defects, or assembly errors
• Packaged Safely: Protected and securely boxed to prevent damage during transit

• Neutral export packing or customized packaging available
• Carton or wooden case for safe transportation
• Fast delivery for stock items
• Shipping by Express Air or Sea