Standard Front Brake Shoe Lining 5-87831801-0 5878318010 For ISUZU 700P 4HK1 Truck

The Standard Front Brake Shoe Lining (OEM Numbers: 5-87831801-0 / 5878318010) is a premium-quality, direct replacement brake friction component designed specifically for ISUZU 700P series trucks equipped with 4HK1 diesel engines.

This front brake shoe lining - also known as a brake lining or friction lining - is the wearable friction material bonded or riveted to the brake shoe. When the brakes are applied, the wheel cylinder pushes the brake shoe outward, pressing the lining against the rotating brake drum. The friction generated converts the vehicle's kinetic energy into heat, slowing or stopping the truck safely and reliably under all load conditions.

• OE Quality: Manufactured to strict ISUZU dimensional and material specifications for perfect fit and function
• High Friction Coefficient: Premium friction composite ensures strong, consistent braking performance
• Excellent Heat Resistance: Withstands high braking temperatures without fading or deterioration
• Precision-Formed Radius: Matches brake drum curvature for full contact and uniform wear
• Non-Asbestos Material: Environmentally friendly and safe for service technicians
• Restores Braking Performance: Eliminates brake noise, reduced stopping power, and pedal pulsation caused by worn linings
• Direct Replacement: Matches OE lining dimensions and mounting configuration
• Long Service Life: Engineered for medium-duty commercial truck applications
• Essential Safety Component: Critical for maintaining reliable braking performance and vehicle safety
• Cost-Effective Repair: Affordable replacement that restores proper braking without replacing the entire brake shoe assembly

This front brake shoe lining is specifically designed for ISUZU medium-duty trucks and commercial vehicles. Common applications include:

• ISUZU 700P (Medium-Duty Trucks)
• ISUZU 4HK1 Engine Specifications:
  • 4-Cylinder, Inline Turbo Diesel
  • Displacement: 5.2L
  • Application: Medium-duty trucks and commercial vehicles
• Also compatible with various ISUZU models using the same front brake assembly configuration

1. Ensure vehicle is safely raised - Use appropriate jack stands or a lift to support the front axle
2. Remove the front wheel - Remove the wheel and tire assembly to access the brake drum
3. Remove the brake drum - Remove the brake drum retaining screws and pull the drum off the hub
4. Remove the brake shoe assembly - Remove the return springs, hold-down springs, and adjuster components; note their positions
5. Remove the old lining - If replacing the lining only, drill out rivets or separate the bonded lining from the brake shoe. (If replacing the complete shoe assembly, skip this step)
6. Clean the brake shoe - Thoroughly clean the brake shoe surface; remove all old lining residue, rust, and debris
7. Install the new lining - Bond or rivet the new lining to the brake shoe according to OE procedure. (Or install the new complete shoe assembly)
8. Reinstall the brake shoe assembly - Position the shoe on the backing plate; secure with hold-down springs
9. Reinstall springs and hardware - Reinstall return springs, adjuster, and other components in the correct order
10. Adjust brake shoe clearance - Adjust the shoe-to-drum clearance to manufacturer specification
11. Reinstall the brake drum - Install the brake drum and retaining screws
12. Reinstall the wheel - Install the wheel and torque lug nuts to specification
13. Bleed the brake system - If the wheel cylinder was disconnected, bleed the brake system
14. Check brake operation - Pump the brake pedal several times to seat the lining; verify firm pedal feel
15. Road test - Test the brakes at low speed in a safe area; verify proper stopping performance and no abnormal noise

• Material Verification: Confirms friction composite composition and hardness meet ISUZU strength and heat resistance specifications
• Dimensional Inspection: Lining dimensions, radius, and mounting hole locations verified within OEM tolerances
• Friction Coefficient Testing: Sample tested to ensure consistent friction performance and heat resistance
• Bond Strength Testing: Where applicable, friction lining bond strength verified for secure attachment
• Visual Inspection: 100% checked for cracks, lining defects, or manufacturing flaws
• Packaged Safely: Protected and packaged to prevent damage during transit

• Neutral export packing or customized packaging available
• Carton or wooden case for safe transportation
• Fast delivery for stock items
• Shipping by Express Air or Sea

For pricing, availability, or bulk purchase of the Standard Front Brake Shoe Lining 5-87831801-0 5878318010 For ISUZU 700P 4HK1 Truck, please contact our sales team for a competitive quote and expert technical support.