Genuine Toyota Headlamp Bulb 90981-13058 9098113058 H4 12V 60/55W Halogen For Hilux Vigo / Land Cruiser Prado / Corolla / RAV4 / Granvia — OEM BULB(FOR HEADLAMP, NO.1)
Key Attributes
Product Summary
Genuine Toyota Headlamp Bulb 90981-13058 Product Overview The Headlamp Bulb (BULB, FOR HEADLAMP, NO.1) with Genuine Toyota OEM number 90981-13058 (also listed as 9098113058) is a verified direct-fit replacement for a wide range of Toyota vehicles. This H4 halogen bulb operates at 12V with a 60/55W ...
Product Details
Toyota H4 halogen headlamp bulb
,OEM Toyota headlight bulb 60/55W
,Toyota Hilux Land Cruiser headlamp bulb
The Headlamp Bulb (BULB, FOR HEADLAMP, NO.1) with Genuine Toyota OEM number 90981-13058 (also listed as 9098113058) is a verified direct-fit replacement for a wide range of Toyota vehicles. This H4 halogen bulb operates at 12V with a 60/55W dual-filament configuration, providing both high beam and low beam functionality from a single bulb.
- OEM Specification - Verified by Genuine Toyota part number 90981-13058
- Precision H4 P43t Configuration - 12V 60/55W, P43t base, dual filament
- Proven OEM Fitment - Confirmed for Hilux Vigo, Land Cruiser Prado, Corolla, RAV4, Granvia
- Original Equipment Quality - Genuine Toyota bulb as fitted at factory
- P43t Base - Standard H4 flange base for secure engagement
If your headlamp bulb is failing, you may experience:
- Dim or Reduced Light Output
- Complete Bulb Failure
- Intermittent Operation
- Discoloured Bulb Glass
- Uneven Beam Pattern
| Brand | Model | Chassis / Series | Years |
|---|---|---|---|
| Toyota | Hilux Vigo | KUN15, KUN25, KUN26 | 2005-2015 |
| Toyota | Hilux | GUN125, GUN126, GUN135 | 2024-2026 |
| Toyota | Land Cruiser Prado | GRJ120, KDJ120, KZJ120 | 2002-2026 |
| Toyota | Corolla / Corolla Altis | CE120, NZE120, ZZE121 | 2000-2007 |
| Toyota | RAV4 | -- | 1997 |
| Toyota | Granvia | xH10 | 1997-1999 |
Quantity Required: 2 per vehicle (one for each headlamp)
Pre-Installation Checklist:
- Allow headlamp assembly to cool completely
- Disconnect negative battery terminal (recommended)
- Wear clean gloves - do not touch glass with bare fingers
- Verify replacement bulb is H4 P43t type
- Inspect headlamp socket for corrosion or damage
Maintenance Schedule:
- Inspection: Every 20,000 km / 12 months
- Replacement: Immediately if bulb fails or output diminishes
- Replace in pairs for balanced illumination
RELATED PRODUCTS
Gear Case Gasket 8-97331631-2 8973316312 For ISUZU D-MAX TFR TFS MU-X UCS UCR Rodeo Colorado 4JK1 4JJ1 — OEM Verified 1.45mm Fiber-Elastomer Composite, 2-Notch
OEM-verified 1.45mm fiber-elastomer gear case gasket with 2 notches for ISUZU 4JK1/4JJ1 engines. Hot-oil resistant composite ensures durable sealing across D-MAX, MU-X, Rodeo, Colorado, and Hitachi/JCB equipment. Precision-formed to OEM pattern; bulk export and custom kit options available.
Steering Knuckle Assembly 43211-KK010 For TOYOTA Hilux Revo GUN125 GUN126 GUN135 Fortuner AN150 AN160 2015-2025 — OEM Genuine Right Front RH, 96mm Wheel Bearing Bore
Genuine TOYOTA OEM 43211-KK010 RH steering knuckle for Hilux Revo & Fortuner 2015-2025. Cast steel, 96mm bearing bore, direct-fit. Verify KK010 vs KK030 by VIN. Pairs with 43212-KK010 LH. ISO quality control, export packing available.
Rear Right Lower Brake Wheel Cylinder 47560-36210 4756036210 For TOYOTA Coaster HZB50 RZB40 RZB50 Dyna 200 Toyoace 14B 15B 1HZ — OEM Verified Direct Fit, 28.5mm Bore, Cast Iron, Rear RH Lower
OEM-verified 47560-36210 rear right lower brake wheel cylinder for TOYOTA Coaster, Dyna 200, Toyoace. 28.5mm bore, cast iron, M10×1.0 thread, 100% pressure tested. Direct-fit R.RH.A position, cross-referenced to ADVICS, Blue Print, TRW. Bulk export ready.
Rear Left Lower Brake Wheel Cylinder 47580-36210 4758036210 For TOYOTA Coaster HZB50 RZB40 RZB50 BB42 Dyna 200 Toyoace 3B 14B 15B — OEM Verified Direct Fit, 1-1/8" Bore, Grey Cast Iron
OEM-verified 47580-36210 rear left lower brake wheel cylinder for TOYOTA Coaster, Dyna 200, Toyoace. 1-1/8" bore, grey cast iron, 100% pressure tested. Direct fit, R.LH.A position, DOT 3/4 compatible. Bulk export available.
