Genuine OEM Fuel Filter Assembly 23300-30200 23300-30201 For Toyota Hilux VII / Hiace / Fortuner 5L 2KD-FTV 1KD-FTV Diesel 2005-2010 — Complete Housing With Priming Pump

The Fuel Filter Assembly with OEM numbers 23300-30200 and 23300-30201 is a verified OEM-grade direct replacement for a wide range of Toyota diesel vehicles, including the Hilux VII, Hiace, and Fortuner. This complete fuel filter housing assembly is a critical component of the diesel fuel system, responsible for removing water, particulate matter, and other contaminants from the fuel before it reaches the high-pressure injection pump.

This is the complete assembly, including the filter housing, priming pump, and water sensor provision. It is designed as a direct replacement for the factory-original unit, requiring no modifications for installation. The assembly is manufactured to Toyota's exacting OEM specifications, ensuring reliable engine starting, optimal combustion, and long service life for injectors and the injection pump.

• OEM Specification — Verified by Toyota OEM part numbers 23300-30200 and 23300-30201
• Precision Dimensions — 82.5mm outer diameter, 75.9mm height, 31.5mm inner diameter — verified by CHAMPION CFF100477 specifications
• Proven Durability — Manufactured from iron housing with paper filter element, designed to withstand diesel fuel exposure and engine vibration
• Verified OEM Fitment — Confirmed for Toyota Hilux VII (08/2004 - 03/2016) and Hiace KDH220 (2005-2006) with 2KD-FTV and 5LE engines
• OEM Cross-Reference Verified — Replaces 23300-30202, 23300-30203, 23300-30204 and is compatible with HENGST E492KP D371

Primary Applications:

Production Detail Notes:

• 23300-30200: Production 2004/08 - 2005/02
• 23300-30201: Production 2005/03 - 2010/04
• Compatible with 5LE..LH20#,212,222 and 2KDFTV..KDH20# applications

Our manufacturing and inspection processes ensure every fuel filter assembly meets or exceeds Toyota OEM standards.

Pre-Installation Checklist:

• Ensure the engine is cool before starting work
• Depressurize the fuel system before disconnecting fuel lines
• Clean the area around the filter assembly to prevent contamination
• CRITICAL: Use clean, high-quality diesel fuel and replace the filter element regularly to protect the injection pump and injectors
• Inspect fuel lines for cracks or damage — replace if necessary

Installation Guidelines (Reference Toyota workshop manual):

1. Depressurize the fuel system and disconnect the negative battery terminal
2. Disconnect the fuel inlet and outlet lines from the old filter assembly (note positions for reinstallation)
3. Disconnect the water sensor connector (if equipped)
4. Remove the mounting bolts securing the filter assembly
5. Remove the old assembly and clean the mounting surface thoroughly
6. Install the new filter assembly with new seals/gaskets
7. Torque mounting bolts to manufacturer's specified torque settings (refer to Toyota workshop manual)
8. Reconnect fuel lines and water sensor connector securely
9. CRITICAL: Prime the fuel system using the manual priming pump until fuel flows free of air bubbles
10. Start the engine and check for fuel leaks
11. Check for proper fuel flow and engine operation

Maintenance Schedule:

• Inspection: During routine fuel filter service (every 20,000-30,000 km). Check for water accumulation, fuel leaks, or contamination
• Draining: Drain water from the filter assembly when the water in fuel warning light illuminates
• Element Replacement: Every 20,000-30,000 km — regular filter changes are the single biggest factor in injection pump and injector longevity
• Assembly Replacement: Immediately if failure symptoms appear or if the housing shows signs of cracking or leakage

• Packaging: Each fuel filter assembly is securely packed in protective packaging to prevent shipping damage
• Suitable for: Wholesale distributors, auto parts retailers, 4×4 specialty shops, commercial vehicle repair shops, and fleet owners