Genuine Toyota Universal Joint Spider Kit 04371-60080 0437160080 For 4Runner / Hiace / Celica GT-FOUR / Land Cruiser — OEM Propeller Shaft Cross Joint 29x78mm
| OEM Part Number: | 04371-60080 / 0437160080 | Part Name: | SPIDER KIT, UNIVERSAL JOINT |
| Fitting Position: | Propeller Shaft / Driveshaft (Front Or Rear) | Outer Diameter: | 29.00 Mm (1.142 Inch) |
| Overall Length: | 78.00 Mm (3.071 Inch) | Net Weight: | 0.51 Kg (1.113 Lb) |
| Material: | High-Strength Alloy Steel With Hardened Trunnions | Includes: | Cross Bearing Assembly, Needle Rollers, Dust Seals, Snap Rings |
| Vehicle Compatibility: | Toyota 4Runner I/III, HiAce, Celica GT-FOUR, Land Cruiser, Dyna, Previa, Supra, FJ Cruiser | Drivetrain: | RWD / 4WD |
| Condition: | Brand New — 100% Quality Inspected | Warranty: | 12 Months |
| High Light: | Genuine Toyota universal joint kit,OEM propeller shaft cross joint,Toyota 4Runner universal joint |
||
The Universal Joint Spider Kit (04371-60080) is a genuine Toyota OEM replacement component designed for rear-wheel-drive and 4WD Toyota vehicles. This precision-engineered cross joint ensures reliable torque transfer while accommodating driveline articulation and suspension movement.
- OEM Specification: Genuine Toyota part number 04371-60080
- Precision Dimensions: 29.00mm cross diameter × 78.00mm length
- Proven Durability: Manufactured to withstand demanding operating conditions
- Installation Success: 99% direct fitment rate across verified applications
Recognize these warning signs of universal joint failure:
- Clunking Noise: During acceleration or deceleration
- Squeaking Sound: At low speeds indicating lubrication loss
- Vibration: At highway speeds from driveline imbalance
- Driveline Shudder: During take-off from excessive play
- Metal Dust/Rust: Visible at bearing caps indicating wear
| Brand | Model | Chassis/Series | Engine | Years |
|---|---|---|---|---|
| Toyota | 4Runner I | N5, N6, N7 (RN50, RN55, RN60) | 2.4L | 1984-1986 |
| Toyota | 4Runner III | N18 (VZN180) | 3.4L | 1995-2002 |
| Toyota | 4Runner | N210 (4th Gen) | 4.0L | 2005-2009 |
| Toyota | HiAce | LH184, RZH125, RZH135, KZH120, TRH112 | 2.0L, 2.4L, 2.7L, 3.0L | 2003-2005 |
| Toyota | Celica Coupe | T16 (ST165) | 2.0L Turbo 4WD | 1988-1989 |
| Toyota | Land Cruiser | FZJ10#, GRJ120, GRJ150, TRJ125 | 4.0L, 4.2L, 2.7L | 2003-2016 |
Factory-fit quality and performance guarantee
Ensures correct fitment in propeller shaft yokes
Withstands demanding off-road and commercial use
Low friction operation with precision needle rollers
Prevents contamination and grease leakage
Ready for installation with all necessary components
| QC Item | Verification Method |
|---|---|
| Dimensional Accuracy | Precision inspection to verify 29mm × 78mm dimensions |
| Material Composition | High-strength alloy steel analysis |
| Hardness Testing | Rockwell hardness testing of trunnion surfaces |
| Rotation Test | 100% testing for smooth, noiseless bearing operation |
| Seal Integrity Test | Dust seal inspection for contamination resistance |
| Final Assembly Inspection | 100% visual and dimensional inspection |
Pre-Installation Checklist:
- Verify part number matches your original universal joint
- Mark propeller shaft and yokes before removal for correct phasing
- Inspect yokes for wear or damage
- Clean yoke bores thoroughly before installation
- Ensure vehicle is securely supported on jack stands
Maintenance Schedule:
- Inspection: Every 50,000 km / 12 months
- Lubrication: Regular greasing through grease nipple (if equipped)
- Replacement: Immediately if failure symptoms appear
| Packaging | Genuine Toyota OEM packaging |
| Single Package Weight | Approx. 0.51 kg (1.113 lb) |
| Suitable For | Wholesale distributors, auto parts retailers, 4×4 specialty shops, commercial vehicle repair shops, and fleet owners |